The DOI matches its Crossref record.
Chemical Modification of Sargassum sp. for Prevention of Organic Leaching and Enhancement of Uptake during Metal Biosorption
Abstract
A significantly high amount of organic leaching has been observed in the treatment and recovery of heavy metals by raw biosorbents. In this study, acid, base, calcium, formaldehyde, and glutaraldehyde are used for the modification of locally derived raw seaweed (RSW), Sargassum sp., so that the modified seaweeds (MSW) have less organic leaching while the metal biosorption capacity is maintained. It is determined that 0.2% of formaldehyde is the best, in regard to chemical modifications. The organic content of the filtrated water samples is only 3.84 mg/L total organic carbon (TOC), 80% less than that when the RSW is used. The metal biosorption capacity is greatly improved, while the uptake kinetics is similar to that of the RSW. The metal biosorption follows a descending sequence: lead > copper > zinc ≈ cadmium > nickel. Higher pH causes higher metal biosorption. Ion exchange has an important role in the metal uptake. A surface diffusion model well describes the biosorption kinetics. It is determined that 0.2 M hydrochloric acid (HCl) is the best, in regard to metal desorption. Approximately 90% of metal ions can be eluted from the metal-loaded MSW, which requires ∼20 min to complete. A five-cycle operation of metal sorption and desorption confirms that the MSW is much better than the RSW. The Fourier transform infrared (FT-IR) analysis demonstrates that the hydroxyl, amino, and carboxyl functional groups in the MSW provide the major biosorption sites for the metal binding. Scanning electron microscopy (SEM) analysis shows a strong coordination cross-linkage between the copper ions and the organic functional groups of the biomass.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Characteristics and adsorption capacities of low-cost sorbents for wastewater treatment: A review
De Gisi, S., Lofrano, G., Grassi, M., & Notarnicola, M. (2016) · Sustainable Materials and Technologies · doi:10.1016/j.susmat.2016.06.002 · Cited by 1,676
Bioadsorbents for remediation of heavy metals: Current status and their future prospects
Gupta, V. K., Nayak, A., & Agarwal, S. (2015) · Environmental Engineering Research · doi:10.4491/eer.2015.018 · Cited by 823
Removal of lead from water using biochars prepared from hydrothermal liquefaction of biomass
Liu, Z., & Zhang, F.-S. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.01.085 · Cited by 710
He, J., & Chen, J. P. (2014) · Bioresource Technology · doi:10.1016/j.biortech.2014.01.068 · Cited by 698
Self-citationGautam, R. K., Mudhoo, A., Lofrano, G., & Chattopadhyaya, M. C. (2014) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2013.12.019 · Cited by 542
Metadata
- Authors
- Chen, J. P., & Yang, L.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2005-11-02
- Volume
- 44
- Issue
- 26
- Pages
- 9931-9942
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2115727943
- Cited by
- 178
- References
- 0
- FWCI
- 11.44
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Chemical Modification of Sargassum sp. for Prevention of Organic Leaching and Enhancement of Uptake during Metal Biosorption. https://app.cochat.ai/papers/10.1021/ie050678t
- The paper
- Chen, J. P., & Yang, L. (2005). Chemical Modification of Sargassum sp. for Prevention of Organic Leaching and Enhancement of Uptake during Metal Biosorption. Industrial & Engineering Chemistry Research. https://doi.org/10.1021/ie050678t
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.