The DOI matches its Crossref record.
Chemical-Looping Combustion with NiO and Fe2O3 in a Thermobalance and Circulating Fluidized Bed Reactor with Double Loops
Abstract
For the chemical-looping combustion (CLC), readily available metal oxides (NiO, Fe 2 O 3 ) for oxygen carriers and bentonite, TiO 2, and Al 2 O 3 for the supports of the looping materials were selected. The reactivity of the oxygen carrier particles was determined in a thermobalance reactor under the reducing (CH 4 ) and oxidizing (O 2 ) conditions at 923−1223 K. The reactivity of NiO is higher than Fe 2 O 3, and the particles supported on bentonite or Al 2 O 3 produce higher reactivity than those on TiO 2 . The reactivity of the metal oxide particles increases with increasing temperature and the amount of NiO. The obtained kinetic data of the NiO−Fe 2 O 3 /bentonite can be analyzed based on the modified volumetric and shrinking core models for the reduction and oxidation conditions, respectively. The CLC experiment was carried out in an annular shape circulating fluidized bed (CFB) reactor with double loops. To determine the optimum fuel gas velocity, the mixture of NiO and Fe 2 O 3 (75:25) on a bentonite support was tested at 1123 K. The CH 4 conversion was higher at lower velocities than that at higher ones, and the optimum CH 4 gas velocity for complete combustion was found to be around 2−3 u mf (minimum fluidizing velocity). Combustion efficiency increases with increasing temperature, and the optimum reaction temperature was found to be around 1123 K. It was found that CO emission from the fuel reactor was negligibly small, and no H 2 emission was detected at the optimum conditions. From the oxidation reactor, NO x emission was also negligibly small, and CO 2 emission was not detected.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Carbon capture and storage update
Boot-Handford, M. E., Abanades, J. C., Anthony, E. J., Blunt, M. J., Brandani, S., Mac Dowell, N., Fernández, J. R., Ferrari, M.-C., Gross, R., Hallett, J. P., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42350f · Cited by 2,386
Progress in Chemical-Looping Combustion and Reforming technologies
Adanez, J., Abad, A., Garcia-Labiano, F., Gayan, P., & de Diego, L. F. (2012) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2011.09.001 · Cited by 2,230
Chemical-looping combustion (CLC) for inherent CO2 separations—a review
Hossain, M. M., & de Lasa, H. I. (2008) · Chemical Engineering Science · doi:10.1016/j.ces.2008.05.028 · Cited by 961
Kinetics of redox reactions of ilmenite for chemical-looping combustion
Abad, A., Adánez, J., Cuadrat, A., García-Labiano, F., Gayán, P., & de Diego, L. F. (2011) · Chemical Engineering Science · doi:10.1016/j.ces.2010.11.010 · Cited by 332
Present status and overview of Chemical Looping Combustion technology
Nandy, A., Loha, C., Gu, S., Sarkar, P., Karmakar, M. K., & Chatterjee, P. K. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.01.003 · Cited by 275
Progress in CFD Simulations of Fluidized Beds for Chemical and Energy Process Engineering
Alobaid, F., Almohammed, N., Massoudi Farid, M., May, J., Rößger, P., Richter, A., & Epple, B. (2022) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2021.100930 · Cited by 266
Chemical Looping Combustion: Status and Development Challenges
Lyngfelt, A. (2020) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c01454 · Cited by 264
Carbon Capture Technologies: A Review on Technology Readiness Level
Hekmatmehr, H., Esmaeili, A., Pourmahdi, M., Atashrouz, S., Abedi, A., Ali Abuswer, M., Nedeljkovic, D., Latifi, M., Farag, S., & Mohaddespour, A. (2024) · Fuel · doi:10.1016/j.fuel.2024.130898 · Cited by 189
Metadata
- Authors
- Son, S. R., & Kim, S. D.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2006-03-18
- Volume
- 45
- Issue
- 8
- Pages
- 2689-2696
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2081574250
- Cited by
- 242
- References
- 0
- FWCI
- 9.75
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.