The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Calcium Oxide Based Sorbents for Capture of Carbon Dioxide at High Temperatures
Abstract
Calcium oxide is a promising sorbent for the capture of carbon dioxide. In this work, CaO sorbents were prepared using different precursors, including Ca(NO 3 ) 2 ·4H 2 O, CaO, Ca(OH) 2, CaCO 3, and Ca(CH 3 COO) 2 ·H 2 O. Of these, the sorbent prepared from calcium acetate (CaAc 2 −CaO) resulted in the best uptake characteristics for CO 2 . This sorbent had a higher BET surface area and larger pore volume than the other sorbents. According to SEM images, this sorbent exhibits a “fluffy” structure, which probably contributes to its high surface area and large pore volume. This sorbent also showed almost 100% carbonation, at temperatures between 550 and 800 °C. Moreover, the carbonation progressed dominantly during an initial short period. Under numerous carbonation/decarbonation cycles, the CaAc 2 −CaO sorbent demonstrated the best reversibility, even in the presence of 10 vol % water vapor. During a 27-cycle operation, the sorbent maintained fairly high conversion of 62 mol % at 700 °C. Pore size distribution measurements indicate that the pore volume decreased as the experimental cycles continued. Silica was doped on the CaAc 2 −CaO sorbent in various weight percentages, but the resultant sorbents did not exhibit better performance under cyclic operation than those without Si dopant.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Gupta, H., & Fan, L.-S. (2002) · Industrial & Engineering Chemistry Research · doi:10.1021/ie010867l · Cited by 541
The reversibility of the reaction CaCO3 ⇄ CaO+CO2
Barker, R. (1973) · Journal of Applied Chemistry and Biotechnology · doi:10.1002/jctb.5020231005 · Cited by 508
Carbon Capture and Storage from Fossil Fuel Use
Herzog, H., & Golomb, D. (2004) · Encyclopedia of Energy · doi:10.1016/b0-12-176480-x/00422-8 · Cited by 346
Mechanism of High-Temperature CO2 Sorption on Lithium Zirconate
Ida, J.-I., & Lin, Y. S. (2003) · Environmental Science & Technology · doi:10.1021/es0259032 · Cited by 245
Aihara, M., Nagai, T., Matsushita, J., Negishi, Y., & Ohya, H. (2001) · Applied Energy · doi:10.1016/s0306-2619(00)00072-6 · Cited by 231
High-Temperature Sorbents for CO2 Made of Alkali Metals Doped on CaO Supports
Reddy, E. P., & Smirniotis, P. G. (2004) · The Journal of Physical Chemistry B · doi:10.1021/jp031245b · Cited by 176
Self-citationCalcium Carbonate Decomposition in Carbon Dioxide Atmosphere
Hyatt, E. P., CUTLER, I. B., & WADSWORTH, M. E. (1958) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1958.tb13521.x · Cited by 130
Cited by
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
CO2 capture by solid adsorbents and their applications: current status and new trends
Wang, Q., Luo, J., Zhong, Z., & Borgna, A. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00064g · Cited by 1,611
The calcium looping cycle for large-scale CO2 capture
Blamey, J., Anthony, E. J., Wang, J., & Fennell, P. S. (2010) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2009.10.001 · Cited by 1,044
Review of recent advances in carbon dioxide separation and capture
Kenarsari, S. D., Yang, D., Jiang, G., Zhang, S., Wang, J., Russell, A. G., Wei, Q., & Fan, M. (2013) · RSC Advances · doi:10.1039/c3ra43965h · Cited by 784
CO2 Capture Capacity of CaO in Long Series of Carbonation/Calcination Cycles
Grasa, G. S., & Abanades, J. C. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0606946 · Cited by 757
Metadata
- Authors
- Lu, H., Reddy, E. P., & Smirniotis, P. G.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2006-05-01
- Volume
- 45
- Issue
- 11
- Pages
- 3944-3949
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2095540636
- Cited by
- 316
- References
- 7
- FWCI
- 19.81
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.