The DOI matches its Crossref record.
Effects of the Temperature Bulge in CO2 Absorption from Flue Gas by Aqueous Monoethanolamine
Abstract
Pilot plant data for CO 2 absorption by aqueous monoethanolamine (MEA) were simulated with the RateSep model and a dynamic model implemented in gPROMS. RateSep is the second generation rate-based model in AspenPlus. Because of the phenomena of combined absorption and water vaporization and condensation, a temperature bulge will appear in the absorber. The present study addresses the effects of column parameters including L/G, heat of absorption, height of packing, and flue gas CO 2 concentration . The temperature bulge is quantified by its magnitude and location and how these parameters affect the absorber performance. When the bulge is located in the top or bottom of the column, the magnitude is close to the limiting values of the temperature in the liquid and gas, respectively, leaving the column. The magnitude is maximized when the bulge is located approximately in the middle of the column. The absorber performance seems to be independent of the bulge location when it is located in the top or in the bottom of the column, while it might affect the performance when located in the middle.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Post-combustion CO2 capture with chemical absorption: A state-of-the-art review
Wang, M., Lawal, A., Stephenson, P., Sidders, J., & Ramshaw, C. (2011) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2010.11.005 · Cited by 1,458
Process intensification for post-combustion CO2 capture with chemical absorption: A critical review
Wang, M., Joel, A. S., Ramshaw, C., Eimer, D., & Musa, N. M. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.08.083 · Cited by 430
Property impacts on Carbon Capture and Storage (CCS) processes: A review
Tan, Y., Nookuea, W., Li, H., Thorin, E., & Yan, J. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.03.079 · Cited by 319
Oko, E., Zacchello, B., Wang, M., & Fethi, A. (2018) · Greenhouse Gases Science and Technology · doi:10.1002/ghg.1772 · Cited by 31
Metadata
- Authors
- Kvamsdal, H. M., & Rochelle, G. T.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2008-01-10
- Volume
- 47
- Issue
- 3
- Pages
- 867-875
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2068958591
- Cited by
- 218
- References
- 0
- FWCI
- 11.38
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effects of the Temperature Bulge in CO2 Absorption from Flue Gas by Aqueous Monoethanolamine. https://app.cochat.ai/papers/10.1021/ie061651s
- The paper
- Kvamsdal, H. M., & Rochelle, G. T. (2008). Effects of the Temperature Bulge in CO2 Absorption from Flue Gas by Aqueous Monoethanolamine. Industrial & Engineering Chemistry Research. https://doi.org/10.1021/ie061651s
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.