The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Reducing the Cost of CO2 Capture from Flue Gases Using Membrane Technology
Open accessAbstract
Studies of CO 2 capture using membrane technology from coal-fired power-plant flue gas typically assume compression of the feed to achieve a driving force across the membrane. The high CO 2 capture cost of these systems reflects the need to compress the low-pressure feed gas (1 bar) and the low CO 2 purity of the product stream. This article investigates how costs for CO 2 capture using membranes can be reduced by operating under vacuum conditions. The flue gas is pressurized to 1.5 bar, whereas the permeate stream is at 0.08 bar. Under these operating conditions, the capture cost is U.S. $54/tonne CO 2 avoided compared to U.S. $82/tonne CO 2 avoided using membrane processes with a pressurized feed. This is a reduction of 35%. The article also investigates the effect on the capture cost of improvements in CO 2 permeability and selectivity. The results show that the capture cost can be reduced to less than U.S. $25/tonne CO 2 avoided when the CO 2 permeability is 300 barrer, CO 2 /N 2 selectivity is 250, and the membrane cost is U.S. $10/m 2 .
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Economics of gas separation membranes
Spillman, R. (1989) · Chemical engineering progress · Cited by 217
Carbon Dioxide Removal from Coal-Fired Power Plants
Hendriks, C. (1994) · Energy & Environment · doi:10.1007/978-94-011-0301-5 · Cited by 203
Calculation Methods for Multicomponent Gas Separation by Permeation
Shindo, Y., Hakuta, T., Yoshitome, H., & Inoue, H. (1985) · Separation Science and Technology · doi:10.1080/01496398508060692 · Cited by 142
Feasibility of polymer membranes for carbon dioxide recovery from flue gases
van der Sluijs, J. P., Hendriks, C. A., & Blok, K. (1992) · Energy Conversion and Management · doi:10.1016/0196-8904(92)90040-4 · Cited by 131
CO2 Capture from Natural Gas Fired Power Plants by Using Membrane Technology
Hägg, M., & Lindbråthen, A. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie050174v · Cited by 106
Economics of CO2 and Mixed Gas Geosequestration of Flue Gas Using Gas Separation Membranes
Ho, M. T., Leamon, G., Allinson, G. W., & Wiley, D. E. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie050549c · Cited by 54
Self-citationComparison of CO2 separation options for geo-sequestration: are membranes competitive?
Ho, M. T., Allinson, G. W., & Wiley, D. E. (2006) · Desalination · doi:10.1016/j.desal.2005.04.135 · Cited by 38
Self-citation
Cited by
Carbon dioxide capture-related gas adsorption and separation in metal-organic frameworks
Li, J.-R., Ma, Y., McCarthy, M. C., Sculley, J., Yu, J., Jeong, H.-K., Balbuena, P. B., & Zhou, H.-C. (2011) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2011.02.012 · Cited by 2,019
Post-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889
Power plant post-combustion carbon dioxide capture: An opportunity for membranes
Merkel, T. C., Lin, H., Wei, X., & Baker, R. (2010) · Journal of Membrane Science · doi:10.1016/j.memsci.2009.10.041 · Cited by 1,657
Recent developments on carbon capture and storage: An overview
Pires, J. C. M., Martins, F. G., Alvim-Ferraz, M. C. M., & Simões, M. (2011) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2011.01.028 · Cited by 811
Guide to CO2 Separations in Imidazolium-Based Room-Temperature Ionic Liquids
Bara, J. E., Carlisle, T. K., Gabriel, C. J., Camper, D., Finotello, A., Gin, D. L., & Noble, R. D. (2009) · Industrial & Engineering Chemistry Research · doi:10.1021/ie8016237 · Cited by 714
Metadata
- Authors
- Ho, M. T., Allinson, G. W., & Wiley, D. E.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2008-02-09
- Volume
- 47
- Issue
- 5
- Pages
- 1562-1568
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2054531987
- Cited by
- 256
- References
- 7
- FWCI
- 29.16
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.