The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Baseline Flowsheet Model for IGCC with Carbon Capture
Abstract
Integrated gasification combined cycle (IGCC) processes have the potential for high thermal efficiency with a low energy penalty for carbon capture. Many researchers have proposed various innovations to improve upon the efficiency of the IGCC process. However, the analysis methods of most publications are generally not transparent and these published results are exceedingly difficult to reproduce. The National Energy Technology Laboratory (NETL) report [ Cost and Performance Baseline for Fossil Energy Plants: Bituminous Coal and Natural Gas to Electricity Final Report; U.S. Department of Energy, Office of Fossil Energy, NETL, DOE/NETL-2010/1397, 2010] is widely used as a reference by researchers and by industry. To enable researchers to have a consistent and transparent framework for analyzing IGCC flowsheets and potential innovations, a baseline model derived from the NETL report is described herein and the corresponding flowsheet model and its full documentation are available online from this journal for use and modification.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Among the main processes based on physical solvents, Selexol™, Rectisol® and Purisol®, the Selexol™ process has been one of the most studied for acid gas removal from high pressure syngas, where it has shown lower energy consumption with recoveries and purities of the captured CO2 around 96-99 % [8-10].”
From Integration of hydrothermal liquefaction and carbon capture and storage for the production of advanced liquid biofuels with negative CO2 emissions (2020) · cites this paper as [9]
In the citing paper
“The use of low temperatures in the solvent is in agreement with the reported in the consulted sources for the Selexol™ process [8,9,37].”
From Integration of hydrothermal liquefaction and carbon capture and storage for the production of advanced liquid biofuels with negative CO2 emissions (2020) · cites this paper as [9]
Citations
Cites
Thermochemical Data of Pure Substances
Barin, I. (1995) · doi:10.1002/9783527619825 · Cited by 4,241
Integrated gasification combined cycle (IGCC) process simulation and optimization
Emun, F., Gadalla, M., Majozi, T., & Boer, D. (2010) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2009.04.007 · Cited by 212
Comparison of Shell, Texaco, BGL and KRW gasifiers as part of IGCC plant computer simulations
Zheng, L., & Furinsky, E. (2005) · Energy Conversion and Management · doi:10.1016/j.enconman.2004.09.004 · Cited by 183
A dynamic two-dimensional heterogeneous model for water gas shift reactors
Adams, T. A., & Barton, P. I. (2009) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2009.08.045 · Cited by 139
Bhattacharyya, D., Turton, R. A., & Zitney, S. E. (2010) · Industrial & Engineering Chemistry Research · doi:10.1021/ie101502d · Cited by 98
Conceptual model and evaluation of generated power and emissions in an IGCC plant
Pérez–Fortes, M., Bojarski, A. D., García, E. V., Nougués, J. M., & Puigjaner, L. (2009) · Energy · doi:10.1016/j.energy.2009.05.012 · Cited by 93
A prediction of performance of commercial coal gasifiers
Watkinson, A. P., Lucas, J. P., & Lim, C. J. (1991) · Fuel · doi:10.1016/0016-2361(91)90030-e · Cited by 93
Modelling of an IGCC plant with carbon capture for 2020
Kunze, C., & Spliethoff, H. (2010) · Fuel Processing Technology · doi:10.1016/j.fuproc.2010.02.017 · Cited by 78
Clean Coal: A new power generation process with high efficiency, carbon capture and zero emissions
Adams, T. A., & Barton, P. I. (2010) · Computer-aided chemical engineering/Computer aided chemical engineering · doi:10.1016/s1570-7946(10)28166-x · Cited by 7
Steam Optimization with Increased Flexibility in Steam Power Island Design
Botros, B. B., & Brisson, J. G. (2010) · DOAJ (DOAJ: Directory of Open Access Journals) · doi:10.3303/cet1021053 · Cited by 3
Research works printed but not linked: 8
- 2009, U.S. Carbon Emissions from Energy Sources 2008 Flash Estimate
- 2008, Aspen Plus Model of the CO2 Capture Process by DEPG
- Monaghan R. F. D., 2009, Proceedings of the ASME International Mechanical Engineering Congress & Exhibition
- Kumar M., 2009, Proceedings of the ASME International Mechanical Engineering Congress & Exhibition
- Bochelie M. J., Using Models to Select Operating Conditions for Gasifiers
- Chen, C.A Technical and Economic Assessment of CO 2 Capture Technology for IGCC Power Plants, Ph.D. Thesis,Carnegie Mellon University,Pittsburgh, PA, 2005
- Couling D., Ind. Eng. Chem. Res.
- Berkelmans, I.Development and Application of a Framework for Technology and Model Selection Under Uncertainty. Ph.D. Thesis,Massachusetts Institute of Technology (MIT),Cambridge, MA, 2010.
Cited by
Role of solvents in CO2 capture processes: The review of selection and design methods
N.Borhani, T., & Wang, M. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109299 · Cited by 397
Modeling and Simulation of Energy Systems: A Review
Subramanian, A. S. R., Gundersen, T., & Adams, T. A. (2018) · Processes · doi:10.3390/pr6120238 · Cited by 185
Dureckova, H., Krykunov, M., Aghaji, M. Z., & Woo, T. K. (2019) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.8b10644 · Cited by 161
Shehzad, A., Bashir, M. J. K., & Sethupathi, S. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.03.042 · Cited by 128
Physical solvents and techno-economic analysis for pre-combustion CO2 capture: A review
Smith, K. H., Ashkanani, H. E., Morsi, B. I., & Siefert, N. (2022) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2022.103694 · Cited by 94
Comparison of CO2 Capture Approaches for Fossil-Based Power Generation: Review and Meta-Study
Adams, T. A., Hoseinzade, L., Madabhushi, P. B., & Okeke, I. J. (2017) · Processes · doi:10.3390/pr5030044 · Cited by 87
Li, G., Liu, Z., Liu, T., Shan, J., Fang, Y., & Wang, Z. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.03.035 · Cited by 79
Levelized Cost of CO2 Captured Using Five Physical Solvents in Pre-combustion Applications
Ashkanani, H. E., Wang, R., Shi, W., Siefert, N., Thompson, R. L., Smith, K. H., Steckel, J. A., Gamwo, I. K., Hopkinson, D., Resnik, K. P., et al. (2020) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2020.103135 · Cited by 78
Almena, A., Siu, R., Chong, K., Thornley, P., & Röder, M. (2024) · Energy Conversion and Management · doi:10.1016/j.enconman.2024.118186 · Cited by 76
Xia, C., Ye, B., Jiang, J., & Shu, Y. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.122615 · Cited by 73
Lozano, E. M., Pedersen, T. H., & Rosendahl, L. A. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.115753 · Cited by 70
“The process here designed (Figure 3) is based on existing layouts for syngas [8,9] and was adjusted for the dual functionality of the process.”
MethodResultHe, C., & You, F. (2014) · AIChE Journal · doi:10.1002/aic.14713 · Cited by 70
Herdem, M. S., Farhad, S., Dinçer, İ., & Hamdullahpur, F. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2013.12.068 · Cited by 63
Zhu, X., Shi, Y., & Cai, N. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.05.068 · Cited by 61
Ullah, R., Atilhan, M., Aparício, S., Canlier, A., & Yavuz, C. T. (2015) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2015.09.013 · Cited by 60
Hamid, U., Rauf, A., Ahmed, U., Shah, M. S. A. S., & Ahmad, N. (2020) · Fuel · doi:10.1016/j.fuel.2020.117111 · Cited by 59
Simulation and assessment of an integrated acid gas removal process with higher CO2 capture rate
Liu, X., Yang, S., Hu, Z., & Qian, Y. (2015) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2015.01.008 · Cited by 58
Ahmed, U. (2020) · Energy Conversion and Management · doi:10.1016/j.enconman.2020.113663 · Cited by 53
Park, J.-W., Heo, S., Yeo, J.-G., Lee, S., Kim, J., & Lee, J. H. (2025) · Membranes · doi:10.3390/membranes15070200 · Cited by 52
Lee, W.-S., Lee, J.-C., Oh, H.-T., Baek, S.-W., Oh, M., & Lee, C. (2017) · Energy · doi:10.1016/j.energy.2017.06.059 · Cited by 52
Ahmed, U. (2020) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2019.12.169 · Cited by 50
Siefert, N., Agarwal, S., Shi, F., Shi, W. Z., Roth, E. A., Hopkinson, D., Kusuma, V. A., Thompson, R. L., Luebke, D. R., & Nulwala, H. (2016) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2016.03.014 · Cited by 47
Hoya, R., & Fushimi, C. (2017) · Fuel Processing Technology · doi:10.1016/j.fuproc.2017.04.014 · Cited by 46
Feasibility of Power and Methanol Production by an Entrained-Flow Coal Gasification System
Wang, X., & Demirel, Y. (2018) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b03958 · Cited by 44
Development of Natural Hydrophobic Deep Eutectic Solvents for Precombustion CO 2 Capture
Xin, K., Gallucci, F., & Annaland, M. V. S. (2022) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.2c05090 · Cited by 43
Performance evaluation and carbon assessment of IGCC power plant with coal quality
Oh, H.-T., Lee, W.-S., Ju, Y., & Lee, C. (2019) · Energy · doi:10.1016/j.energy.2019.116063 · Cited by 42
Processes and simulations for solvent-based CO2 capture and syngas cleanup
Adams, T. A., Salkuyeh, Y. K., & Nease, J. (2014) · Elsevier eBooks · doi:10.1016/b978-0-444-59566-9.00006-5 · Cited by 42
Lee, W.-S., Oh, H.-T., Lee, J.-C., Oh, M., & Lee, C. (2019) · Energy · doi:10.1016/j.energy.2019.01.069 · Cited by 41
Entrained flow gasification-based biomass-to-X processes: An energetic and technical evaluation
Hänel, A., Dieterich, V., Bastek, S., Spliethoff, H., & Fendt, S. (2022) · Energy Conversion and Management · doi:10.1016/j.enconman.2022.116424 · Cited by 39
Yu, B., & Chien, I. (2015) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b02345 · Cited by 38
Vapor–Liquid Phase Equilibrium Data of CO2 in Some Physical Solvents from 285.19 K to 313.26 K
Gui, X., Wang, W., Wang, C., Zhang, L., Yun, Z., & Tang, Z. (2014) · Journal of Chemical & Engineering Data · doi:10.1021/je400985u · Cited by 36
Technoeconomic analysis of a waste tire to liquefied synthetic natural gas (SNG) energy system
Subramanian, A. S. R., Gundersen, T., & Adams, T. A. (2020) · Energy · doi:10.1016/j.energy.2020.117830 · Cited by 35
Botero, C., Field, R. P., Brasington, R., Herzog, H. J., & Ghoniem, A. F. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie3018093 · Cited by 34
Self-citationHuang, W., Zheng, D., Xie, H. J., Li, Y., & Wu, W. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.02.007 · Cited by 34
Motta, I. L., Marchesan, A. N., Filho, R. M., & Maciel, M. R. W. (2025) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2025.150234 · Cited by 33
Ashkanani, H. E., Wang, R., Shi, W., Siefert, N., Thompson, R. L., Smith, K. H., Steckel, J. A., Gamwo, I. K., Hopkinson, D., Resnik, K. P., et al. (2021) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2021.103371 · Cited by 33
Design and Economic Evaluation of a Coal-to-Synthetic Natural Gas Process
Yu, B., & Chien, I. (2015) · Industrial & Engineering Chemistry Research · doi:10.1021/ie503595r · Cited by 32
Hosseini, T., Zavareh, M. T., Smart, S., & Ashman, P. J. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.08.256 · Cited by 29
He, C., You, F., & Feng, X. T. (2014) · AIChE Journal · doi:10.1002/aic.14551 · Cited by 29
Riboldi, L., & Bolland, O. (2015) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2015.10.006 · Cited by 28
Korre, A., Durucan, Ş., & Nie, Z. (2019) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2019.102836 · Cited by 28
Mei, W., Zhai, R., Zhao, Y., Yao, Z., & Ma, N. (2023) · Energy · doi:10.1016/j.energy.2023.129663 · Cited by 28
Couling, D. J., Prakash, K., & Green, W. H. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200291j · Cited by 28
Emenike, O., Michailos, S. E., Hughes, K. J., Ingham, D. B., & Pourkashanian, M. M. (2021) · Sustainable Energy & Fuels · doi:10.1039/d1se00123j · Cited by 25
Shaki, H. (2023) · Journal of Industrial Textiles · doi:10.1177/15280837231160290 · Cited by 25
RetractedLiu, Z., & Green, W. H. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie4030006 · Cited by 25
Jeong, W., Lee, J., Ko, C.-K., Yi, S.-H., & Lee, J. H. (2023) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2023.103936 · Cited by 24
Hoseinzade, L., & Adams, T. A. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.12.006 · Cited by 24
Biomass‐gas‐and‐nuclear‐to‐liquids (BGNTL) processes part I: Model development and simulation
Scott, J. A., & Adams, T. A. (2018) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.23231 · Cited by 23
Sanchez, E. L., Petersen, S. B., Paulsen, M. M., Rosendahl, L. A., & Pedersen, T. H. (2021) · Energy Conversion and Management X · doi:10.1016/j.ecmx.2021.100089 · Cited by 22
Lima, F. V., Daoutidis, P., & Michael Tsapatsis, B. (2016) · AIChE Journal · doi:10.1002/aic.15153 · Cited by 22
Muhammad, A., Muhammad, Z., Ullah, A., Muhammad, R., & Ramzan, N. (2021) · Energy Conversion and Management · doi:10.1016/j.enconman.2021.114782 · Cited by 22
Future opportunities and challenges in the design of new energy conversion systems
Adams, T. A. (2015) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2015.04.029 · Cited by 21
Ramzan, N., Rizwan, M., Zaman, M., Adnan, M., Ullah, A., Güngör, A., Shakeel, U., & Haq, A. U. (2022) · International Journal of Energy Research · doi:10.1002/er.8674 · Cited by 20
Optimal design and operation of a waste tire feedstock polygeneration system
Subramanian, A. S. R., Gundersen, T., & Adams, T. A. (2021) · Energy · doi:10.1016/j.energy.2021.119990 · Cited by 18
Shehzad, A., Bashir, M. J. K., Horttanainen, M., Mänttäri, M., Havukainen, J., & Abbas, G. (2017) · Environmental Technology · doi:10.1080/09593330.2017.1340350 · Cited by 17
Nakashima, R. N., Florez-Orrego, D. A., & de Oliveira, S. (2019) · Journal of Power Technologies · Cited by 17
Wright, M. M., Seifkar, N., Green, W. H., & Román‐Leshkov, Y. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b00060 · Cited by 17
Botero, C., Field, R. P., Herzog, H. J., & Ghoniem, A. F. (2013) · Energy Procedia · doi:10.1016/j.egypro.2013.06.101 · Cited by 16
Self-citationAnalysis of Hydroxide Sorbents for CO2 Capture from Warm Syngas
Couling, D. J., Das, U., & Green, W. H. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie300189a · Cited by 16
A high‐efficiency novel IGCC‐OTM carbon capture power plant design
Wu, X., Cai, L., Zhu, X., Ghoniem, A. F., & Yang, W. (2020) · Journal of Advanced Manufacturing and Processing · doi:10.1002/amp2.10059 · Cited by 15
Qin, Z., Zhang, Z., & Ma, X. (2022) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2022.02.053 · Cited by 15
Comprehensive Exergy Analysis of Three IGCC Power Plant Configurations with CO2 Capture
Siefert, N., Narburgh, S., & Chen, Y. (2016) · Energies · doi:10.3390/en9090669 · Cited by 15
Improving high temperature heat capture for power generation in gasification plants
Botros, B. B., & Brisson, J. G. (2013) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.01.033 · Cited by 15
Mei, W., Zhai, R., & Qian, Z. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.119998 · Cited by 14
Ebrahim‐Moghaddam, M., Dahmen, N., Santo, U., & Sauer, J. (2024) · Energy & Fuels · doi:10.1021/acs.energyfuels.3c04524 · Cited by 14
Li, J., Han, W., Li, P., Ma, W., Xue, X., & Jin, H. (2023) · Energy · doi:10.1016/j.energy.2023.129153 · Cited by 14
Zhu, X., Shi, Y., Cai, N., Li, S., & Yang, Y. (2014) · Energy Procedia · doi:10.1016/j.egypro.2014.11.216 · Cited by 14
Li, K., Wang, Q., Fang, M., Shaikh, A. R., Xie, G., & Luo, Z. (2018) · Chemical Engineering & Technology · doi:10.1002/ceat.201800338 · Cited by 14
Kibria, M. A., McManus, D. E., & Bhattacharya, S. (2023) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2023.04.213 · Cited by 13
Challenges and Opportunities in the Design of New Energy Conversion Systems
Adams, T. A. (2014) · Computer-aided chemical engineering/Computer aided chemical engineering · doi:10.1016/b978-0-444-63433-7.50002-x · Cited by 12
Influences of syngas pretreatment on the performance and energy distribution in an IGCC power plant
Han, L., Deng, G., Li, Z., Liu, P., & Fan, Y. (2017) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2017.12.007 · Cited by 12
Thompson, R. L., Culp, J., Tiwari, S. P., Basha, O. M., Shi, W. Z., Damodaran, K., Resnik, K. P., Siefert, N., & Hopkinson, D. (2019) · Energy & Fuels · doi:10.1021/acs.energyfuels.9b00500 · Cited by 12
Vargas, G. G., Florez-Orrego, D. A., & de Oliveira, S. (2023) · Entropy · doi:10.3390/e25071098 · Cited by 11
Li, J., Han, W., Song, X., Li, P., Wang, Z., & Jin, H. (2024) · Energy · doi:10.1016/j.energy.2024.132406 · Cited by 11
CaO-Based Energy and CO2 Storage System for the Flexibilization of an IGCC Plant with Carbon Capture
Vandersickel, A., Field, R. P., Chen, W., Mancini, N. D., & Mitsos, A. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie501475f · Cited by 11
Self-citationNear-zero emission IGCC system coupled with low-energy chemical looping nitrogen substitution
Song, X., Li, J., Han, W., Ma, W., Han, Z., & Zhang, N. (2024) · Energy · doi:10.1016/j.energy.2024.134143 · Cited by 10
Biswas, S., Menon, A., Field, R. P., Zang, G., & Green, W. H. (2025) · Energy & Fuels · doi:10.1021/acs.energyfuels.5c03111 · Cited by 10
Self-citationState estimation and sensor location for Entrained-Flow Gasification Systems using Kalman Filter
Valipour, M., Toffolo, K., & Ricardez‐Sandoval, L. (2020) · Control Engineering Practice · doi:10.1016/j.conengprac.2020.104702 · Cited by 10
Liu, M., Tong, X., Ling, B., Xia, Y., & Xiang, D. (2025) · Fuel · doi:10.1016/j.fuel.2025.134876 · Cited by 9
He, C., Pan, M. H., Zhang, B., Chen, Q., You, F., & Ren, J. (2017) · AIChE Journal · doi:10.1002/aic.16058 · Cited by 8
Botero, C., Field, R. P., Herzog, H. J., & Ghoniem, A. F. (2013) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2013.07.001 · Cited by 8
Self-citationNonlinear model predictive control of IGCC plants with membrane reactors for carbon capture
Lima, F. V., Amrit, R., Michael Tsapatsis, B., & Daoutidis, P. (2013) · Proceedings of the ... American Control Conference/Proceedings of the American Control Conference · doi:10.1109/acc.2013.6580410 · Cited by 8
Application of elevated temperature pressure swing adsorption in hydrogen production from syngas
Zhu, X., Hao, P., Shi, Y., Li, S., & Cai, N. (2019) · Adsorption · doi:10.1007/s10450-019-00175-6 · Cited by 8
System and Processes of Pre-combustion Carbon Dioxide Capture and Separation
Zhu, X., Shi, Y., Li, S., Cai, N., & Anthony, E. J. (2018) · Royal Society of Chemistry eBooks · doi:10.1039/9781788013390-00281 · Cited by 7
Sanchez, E. L., Paulsen, M. M., Ferrari, F. A., & Pedersen, T. H. (2024) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.3c04157 · Cited by 7
Nakashima, R. N. (2022) · Digital Library of Theses and Dissertations (Universidade de São Paulo) · doi:10.11606/t.3.2022.tde-26082022-081436 · Cited by 6
Ngo, N. K., Nathan, G. J., Ashman, P. J., Hosseini, T., Beath, A., & Saw, W. L. (2024) · Energy & Fuels · doi:10.1021/acs.energyfuels.4c00990 · Cited by 5
Thermodynamic analysis and optimization of coal supercritical water gasification system
Yao, B., Han, X., Shi, H., Li, M., Wu, X., & Han, Z. (2025) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2025.127882 · Cited by 5
Simple Parametric Model for Quick Assessment of IGCC Performance
Gülen, S. C., & Driscoll, A. V. (2012) · Journal of Engineering for Gas Turbines and Power · doi:10.1115/1.4007373 · Cited by 5
Hallmark, B., Parra-Garrido, J., Murdoch, A. P., Salmon, I., & Hodrien, C. (2016) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.22746 · Cited by 4
Sustainable Aviation Fuel from Biomass via Gasification and Fischer–Tropsch Synthesis
Dossow, M., Dieterich, V., Hanel, A., & Fendt, S. (2022) · Royal Society of Chemistry eBooks · doi:10.1039/9781839167829-00337 · Cited by 4
Membrane Considerations and Plant Design for Pre-Combustion CO2 Capture
Bagnato, G., & Sanna, A. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-813645-4.00015-5 · Cited by 4
Design and Economic Evaluation of Coal to Synthetic Natural Gas (SNG) Process
Yu, B., & Chien, I. (2015) · Computer-aided chemical engineering/Computer aided chemical engineering · doi:10.1016/b978-0-444-63577-8.50030-9 · Cited by 4
Zhao, L., Ling, B., Xu, W., Zhu, L., & Xiang, D. (2025) · Energy Conversion and Management · doi:10.1016/j.enconman.2025.120935 · Cited by 3
Okeke, I. J., & Adams, T. A. (2019) · Computer-aided chemical engineering/Computer aided chemical engineering · doi:10.1016/b978-0-12-818597-1.50026-6 · Cited by 3
Adnan, M., Zaman, M., Ullah, A., & Güngör, A. (2021) · International Conference on Energy Conservation and Efficiency (ICECE) · doi:10.1109/icece51984.2021.9406293 · Cited by 3
Advanced Control Strategies for IGCC Plants with Membrane Reactors for CO2Capture
Lima, F. V., He, X., Amrit, R., & Daoutidis, P. (2017) · Wiley eBooks · doi:10.1002/9781119106418.ch19 · Cited by 3
Combined Coal Gasification and Alkaline Water Electrolyzer for Hydrogen Production
Herdem, M. S. (2013) · UWSpace (University of Waterloo) · Cited by 3
Culp, J. T., Thompson, R. L., Smith, K. H., Hopkinson, D., & Siefert, N. (2025) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2025.104432 · Cited by 2
Metadata
- Authors
- Field, R. P., & Brasington, R.
- Affiliations
- Massachusetts Institute of Technology (US)
- Corresponding author
- Field, Randall P.
- ORCID
- Field, Randall P.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-08-31
- Volume
- 50
- Issue
- 19
- Pages
- 11306-11312
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2332602417
- Cited by
- 108
- References
- 10
- Citations by year
- 2026: 2 · 2025: 8 · 2024: 7 · 2023: 7 · 2022: 8 · 2021: 7 · 2020: 11 · 2019: 10 · 2018: 8 · 2017: 8 · 2016: 6 · 2015: 8 · 2014: 9 · 2013: 5 · 2012: 3
- FWCI
- 10.20
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Industrial & Engineering Chemistry Research (publishedVersion)
- Funders
- U.S. Department of Energy
- Office of Fossil Energy
- National Energy Technology Laboratory
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Energy › Fuel Technology › Mining and Gasification Technologies
- Physical Sciences › Engineering › Mechanical Engineering › Thermodynamic and Exergetic Analyses of Power and Cooling Systems
- Keywords
- integrated gasification combined cycle, CO2 capture, coal liquefaction, process efficiency, energy penalty, bituminous coal
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.