The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Portland Cement Paste Modified by TiO2Nanoparticles: A Microstructure Perspective
Abstract
Nanomodified Portland cement paste with a water/cement ratio of 0.4 was prepared with the addition of TiO 2 nanoparticles at 0.1, 0.5, 1.0, and 1.5% by mass of cement. The flexural strengths of the prepared cement-based composites were tested, and the fracture surfaces were observed by scanning electron microscopy (SEM). The flexural strength of the nanomodified TiO 2 Portland cement paste reached the highest value with a dosage of 1.0 mass %. The SEM observation shows that admixing of the TiO 2 nanoparticles largely decreased the quantity of internal microcracks in the cement paste. A new type of needle-shaped hydration product was observed, and its potential growth mechanism was proposed. Atomic force microscopy was introduced to observe the microstructure of nanomodified Portland cement paste, and the results show that the nanoroughness of the hardened cement pastes with admixed TiO 2 nanoparticles was much lower than that without the TiO 2 nanoparticle addition. Coupled with X-ray diffraction data, the morphological information obtained at the micrometer and nanometer scales shed light on the role of TiO 2 nanoparticles in the cement-based composite.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Scrivener, K. L., Füllmann, T., Gallucci, E., Walenta, G., & Bermejo, E. (2004) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.04.014 · Cited by 565
Cited by
Effects of nano-TiO2 on strength, shrinkage and microstructure of alkali activated slag pastes
Yang, L. Y., Jia, Z. J., Zhang, Y. M., & Dai, J. G. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.11.009 · Cited by 267
Daniyal, M., Akhtar, S., & Azam, A. (2019) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.10.010 · Cited by 61
Review on Characterization and Mechanical Performance of Self-cleaning Concrete
Zailan, S. N., Mahmed, N., Abdullah, M. M. A. B., Victor Sandu, A., & Shahedan, N. F. (2017) · MATEC Web of Conferences · doi:10.1051/matecconf/20179701022 · Cited by 22
Metadata
- Authors
- Feng, D., Xie, N., Gong, C., Leng, Z., Xiao, H., Li, H., & Shi, X.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-08-06
- Volume
- 52
- Issue
- 33
- Pages
- 11575-11582
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2332059928
- Cited by
- 163
- References
- 1
- FWCI
- 7.98
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.