Accumulation of Inorganic Impurities on HZSM-5 Zeolites during Catalytic Fast Pyrolysis of Switchgrass
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
The fate of inorganic species present in switchgrass during fluidized bed catalytic pyrolysis over HZSM-5 catalysts was studied with emphasis on their accumulation on the catalyst. Five catalytic pyrolysis experiments were performed in two series, reusing the catalyst after each sample. Catalysts were regenerated from deactivation due to carbon deposits via their removal by combustion at regular intervals. The fates of seven inorganic elements were tracked: Ca, Cu, Fe, K, Mg, Na, and P. Potassium accumulated with the HZSM-5 catalyst the fastest while iron was the metal that accumulated most preferentially on the catalysts, with about 42% of the Fe content of the biomass remaining with the HZSM-5. The total amount of these seven elements accumulated on HZSM-5 in a linear fashion during continued use of the same catalyst sample. As the catalyst was exposed to more switchgrass and accumulated more inorganic containments, its effectiveness at deoxygenating the pyrolysis liquids decreased. Selectivity for aromatic hydrocarbons also decreased, indicating that deactivation of HZSM-5 by exposure to inorganic contaminants in biomass should be a consideration for biomass deoxygenation by catalytic fast pyrolysis.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Screening acidic zeolites for catalytic fast pyrolysis of biomass and its components
Mihalcik, D. J., Mullen, C. A., & Boateng, A. A. (2011) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.06.001 · Cited by 513
Self-citationChemical Composition of Bio-oils Produced by Fast Pyrolysis of Two Energy Crops
Mullen, C. A., & Boateng, A. A. (2008) · Energy & Fuels · doi:10.1021/ef700776w · Cited by 369
Self-citation
Cited by
Chen, X., Che, Q., Li, S., Liu, Z., Yang, H., Chen, Y., Wang, X., Shao, J., & Chen, H. (2019) · Fuel Processing Technology · doi:10.1016/j.fuproc.2019.106180 · Cited by 460
Wang, W., Lemaire, R., Bensakhria, A., & Luart, D. (2022) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2022.105479 · Cited by 429
Effect of biomass ash in catalytic fast pyrolysis of pine wood
Yildiz, G., Ronsse, F., Venderbosch, R., Duren, R. V., Kersten, S. R. A., & Prins, W. (2015) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2014.12.044 · Cited by 308
Liu, R., Sarker, M., Rahman, M. M., Li, C., Chai, M., Nishu, Cotillon, R., & Scott, N. R. (2020) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100852 · Cited by 264
Critical review of the role of ash content and composition in biomass pyrolysis
Puri, L., Hu, Y., & Naterer, G. (2024) · Frontiers in Fuels · doi:10.3389/ffuel.2024.1378361 · Cited by 226
Product quality and catalyst deactivation in a four day catalytic fast pyrolysis production run
Paasikallio, V., Lindfors, C., Kuoppala, E., Solantausta, Y., Oasmaa, A., Lehto, J., & Lehtonen, J. (2014) · Green Chemistry · doi:10.1039/c4gc00571f · Cited by 154
Metadata
- Authors
- Mullen, C. A., & Boateng, A. A.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-11-22
- Volume
- 52
- Issue
- 48
- Pages
- 17156-17161
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2324891570
- Cited by
- 107
- References
- 2
- FWCI
- 4.43
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.