The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
HZSM-5 Zeolites with Different SiO2/Al2O3Ratios. Characterization and NH3Desorption Kinetics
Abstract
This article reports the influence of the SiO 2 /Al 2 O 3 ratio (30, 80, and 280) on HZSM-5 zeolite properties. XRD patterns show a decrease in the XRD peak intensity at low 2θ angles for low SiO 2 /Al 2 O 3 ratio zeolites. N 2 adsorption and desorption isotherms display hysteresis with both micropores and mesopores likely contributing to the particles network. The NLDFT cylindrical model confirms the characteristic 5.5 Å micropores in the zeolite pore framework. Furthermore, specific surface area, pore volume, and pore size distributions demonstrate that changes in the SiO 2 /Al 2 O 3 ratio do not influence HZSM-5 structural properties. NH 3 -TPD shows both weak and strong acid sites. Pyridine-FTIR also confirms that, in HZSM-5, the weak acidity encompasses Lewis and hydrogen-bonded sites, while the strong acidity mainly involves the Brönsted acid sites. It is proven that the ratio of weak to strong acid sites as measured by NH 3 -TPD and Pyridine-FTIR displays similar changes to the SiO 2 /Al 2 O 3 ratio. Furthermore, NH 3 desorption kinetics and numerical regression allow the establishment of energies of activation for both strong and weak acid sites. It is also found that the kinetic desorption rate constants vary in agreement with the changes in weak and strong acid sites as observed with NH 3 -TPD and Pyridine-FTIR.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sing, K. S. W. (1985) · Pure and Applied Chemistry · doi:10.1351/pac198557040603 · Cited by 24,485
Groen, J. C., Peffer, L. A. A., & Pérez-Ramı́rez, J. (2003) · Microporous and Mesoporous Materials · doi:10.1016/s1387-1811(03)00339-1 · Cited by 2,131
Characterization of Porous Solids and Powders: Surface Area, Pore Size and Density
Lowell, S., Shields, J. E., Thomas, M. A., & Thommes, M. (2004) · Particle Technology Series · doi:10.1007/978-1-4020-2303-3 · Cited by 1,824
Pore size distribution analysis of microporous carbons: a density functional theory approach
Lastoskie, C., Gubbins, K. E., & Quirke, N. (1993) · The Journal of Physical Chemistry · doi:10.1021/j100120a035 · Cited by 1,219
Heterogeneous catalysis in industrial practice
Satterfield, C. N. (1991) · Medical Entomology and Zoology · Cited by 1,211
Infrared and temperature-programmed desorption study of the acidic properties of ZSM-5-type zeolites
TOPSOE, N. (1981) · Journal of Catalysis · doi:10.1016/0021-9517(81)90315-8 · Cited by 633
Collection of Simulated XRD Powder Patterns for Zeolites
(2007) · Elsevier eBooks · doi:10.1016/b978-0-444-53067-7.x5470-7 · Cited by 546
Curvature and parametric sensitivity in models for adsorption in micropores
Saito, A., & Foley, H. C. (1991) · AIChE Journal · doi:10.1002/aic.690370312 · Cited by 512
Methanol to gasoline over zeolite H-ZSM-5: Improved catalyst performance by treatment with NaOH
Bjørgen, M., Joensen, F., Spangsberg Holm, M., Olsbye, U., Lillerud, K.-P., & Svelle, S. (2008) · Applied Catalysis A: General · doi:10.1016/j.apcata.2008.04.020 · Cited by 494
The effect of Si/Al ratio of ZSM‐5 zeolite on its morphology, acidity and crystal size
Shirazi, L., Jamshidi, E., & Ghasemi, M. R. (2008) · Crystal Research and Technology · doi:10.1002/crat.200800149 · Cited by 426
Katada, N., Igi, H., Kim, J., & Niwa, M. (1997) · The Journal of Physical Chemistry B · doi:10.1021/jp9639152 · Cited by 410
Measurement of the acidity of various zeolites by temperature-programmed desorption of ammonia
Hidalgo, C. (1984) · Journal of Catalysis · doi:10.1016/0021-9517(84)90225-2 · Cited by 325
On the nature of framework Brønsted and Lewis acid sites in ZSM-5
Woolery, G. L., Kuehl, G. H., Timken, H. C., Chester, A. W., & Vartuli, J. C. (1997) · Zeolites · doi:10.1016/s0144-2449(97)00086-9 · Cited by 302
Holm, M. S., Svelle, S., Joensen, F., Beato, P., Christensen, C. H., Bordiga, S., & Bjørgen, M. (2009) · Applied Catalysis A: General · doi:10.1016/j.apcata.2008.11.033 · Cited by 295
Triantafillidis, C. S., Vlessidis, A. G., Nalbandian, L., & Evmiridis, N. P. (2001) · Microporous and Mesoporous Materials · doi:10.1016/s1387-1811(01)00399-7 · Cited by 295
Characterization of porous solids II
Siegel, R. A. (1993) · Journal of Controlled Release · doi:10.1016/0168-3659(93)90045-7 · Cited by 220
Effects of crystal size and Si/Al ratio on the surface properties of H-ZSM-5 zeolites
Armaroli, T., Simon, L. J., Digne, M., Montanari, T., Bevilacqua, M., Valtchev, V., Patarin, J., & Busca, G. (2006) · Applied Catalysis A: General · doi:10.1016/j.apcata.2006.03.030 · Cited by 208
Jin, F., & Li, Y. (2009) · Catalysis Today · doi:10.1016/j.cattod.2008.06.007 · Cited by 188
Konno, H., Okamura, T., Kawahara, T., Nakasaka, Y., Tago, T., & Masuda, T. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.06.157 · Cited by 186
Llewellyn, P. L., Coulomb, J. P., Grillet, Y., Patarin, J., André, G., & Rouquérol, J. (1993) · Langmuir · doi:10.1021/la00031a037 · Cited by 148
Tonetto, G. M., Atias, J. A., & de Lasa, H. (2004) · Applied Catalysis A General · doi:10.1016/j.apcata.2004.03.042 · Cited by 141
Determination of the number and acid strength of acid sites in zeolites by ammonia adsorption
Kapustin, G. I., Brueva, T. R., Klyachko, A. L., Beran, S., & Wichterlová, B. (1988) · Applied Catalysis · doi:10.1016/0166-9834(88)80005-8 · Cited by 140
Acidity and activity of H-ZSM—5 measured with NH3-t.p.d. and n-hexane cracking
Post, J. G., & van Hooff, J. H. C. (1984) · Zeolites · doi:10.1016/0144-2449(84)90065-4 · Cited by 117
Suzuki, K., Noda, T., Katada, N., & Niwa, M. (2007) · Journal of Catalysis · doi:10.1016/j.jcat.2007.05.024 · Cited by 114
Enhancement of Sorption Processes in the Zeolite H‐ZSM5 by Postsynthetic Surface Modification
Reitmeier, S. J., Gobin, O. C., Jentys, A., & Lercher, J. A. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200803869 · Cited by 112
Al-Ghamdi, S., Volpe, M. A., Hossain, M. M., & de Lasa, H. (2012) · Applied Catalysis A General · doi:10.1016/j.apcata.2012.10.007 · Cited by 100
A catalytic method for the quantitative evaluation of crystallinites of ZSM-5 zeolite preparations
Hardenberg, T. A. J., Mertens, L., Mesman, P., et al. (1992) · Zeolites · doi:10.1016/0144-2449(92)90116-7 · Cited by 81
Du, X., & Wu, E. (2007) · Journal of Physics and Chemistry of Solids · doi:10.1016/j.jpcs.2007.04.013 · Cited by 81
Temperature-programmed desorption (TPD) of ammonia from HZSM-5 zeolites
Hunger, B., Hoffmȧnn, J., Heitzsch, O., et al. (1990) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/bf01914061 · Cited by 71
The characterization and elimination of the external acidity of ZSM-5
Weber, R. W., Fletcher, J. C. Q., Möller, K. P., & O’Connor, C. T. (1996) · Microporous Materials · doi:10.1016/0927-6513(96)00026-0 · Cited by 64
Correlation of TPD and impedance measurements on the desorption of NH3 from zeolite H-ZSM-5
Rodríguez-González, L. V., Rodríguez-Castellón, E., Jiménez‐López, A., & Simon, U. (2008) · Solid State Ionics · doi:10.1016/j.ssi.2008.06.007 · Cited by 57
Müller, U., Reichert, H., Robens, E., Unger, K. K., Grillet, Y., Rouquérol, F., Rouquérol, J., Pan, D., & Mersmann, A. (1989) · Fresenius Zeitschrift für Analytische Chemie · doi:10.1007/bf00572345 · Cited by 57
Infrared spectroscopic studies of acid properties of NaHZSM-5 zeolites
Dátka, J. (1986) · Journal of Catalysis · doi:10.1016/0021-9517(86)90139-9 · Cited by 52
Matsuura, H., Katada, N., & Niwa, M. (2003) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2003.09.020 · Cited by 51
Catalytic conversion of benzothiophene over a H-ZSM5 based catalyst
Al‐Bogami, S. A., & de Lasa, H. (2012) · Fuel · doi:10.1016/j.fuel.2012.11.008 · Cited by 39
Thiophene conversion under mild conditions over a ZSM-5 catalyst
Jaimes, L., Ferreira, M. L., & de Lasa, H. (2009) · Chemical Engineering Science · doi:10.1016/j.ces.2009.01.070 · Cited by 35
Effect of Crystal Size on Physico-Chemical Properties of ZSM-5
Singh, M., Kamble, R., & Viswanadham, N. (2007) · Catalysis Letters · doi:10.1007/s10562-007-9282-7 · Cited by 28
Catalytic Conversion of Thiophene under Mild Conditions over a ZSM-5 Catalyst. A Kinetic Model
Jaimes, L., & de Lasa, H. (2009) · Industrial & Engineering Chemistry Research · doi:10.1021/ie8020126 · Cited by 27
Synthesis and characterization of silicalite powders and membranes with micro–meso bimodal pores
Cooper, C. A., & Lin, Y. S. (2006) · Journal of Materials Science · doi:10.1007/s10853-006-1020-9 · Cited by 18
Metadata
- Authors
- Al-Dughaither, A. S., & de Lasa, H.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-02-14
- Volume
- 53
- Issue
- 40
- Pages
- 15303-15316
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W1981548424
- Cited by
- 322
- References
- 39
- FWCI
- 6.49
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.