The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Kinetics of Strong Acid Hydrolysis of a Bleached Kraft Pulp for Producing Cellulose Nanocrystals (CNCs)
Abstract
Cellulose nanocrytals (CNCs) are predominantly produced using the traditional strong acid hydrolysis process. In most reported studies, the typical CNC yield is low (approximately 30%) despite process optimization. This study investigated the hydrolysis of a bleached kraft eucalyptus pulp using sulfuric acid between 50 and 64 wt % at temperatures of 35–80 °C over time periods of up to 240 min for the production of CNCs. The experimental design captured the feature of the coexistence of a variety of reaction products, such as CNC, cellulosic solid residue (CSR), glucose, and xylose, in the product stream for accurate kinetic modeling to improve the CNC production yield. The kinetic model describing the solubilization of cellulose fibers used three phenomenological reactions, namely, hydrolysis of xylan to form xylose, depolymerization of cellulose to CNCs, and hydrolysis of cellulose to form glucose, each of which can be described by pseudohomogenous first-order kinetics. The concept of “degrees of hydrolyzable xylan or cellulose” to reflect the inhomogeneity of xylan or cellulose in hydrolysis was incorporated into the kinetic modeling to improve model accuracy. The developed model showed excellent predictability for CNC production. Both the experimental data and the model clearly indicate that CNC production was limited by cellulose depolymerization at low acid concentrations of below 58 wt %, but controlled by CNC degradation when the acid concentration was higher than 58 wt %. This work for the first time provides the most plausible description of CNC production kinetics, which is significant for the commercial production of CNCs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellulose nanomaterials review: structure, properties and nanocomposites
Moon, R. J., Martini, A., Nairn, J., Simonsen, J., & Youngblood, J. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00108b · Cited by 6,756
Cellulose nanocrystals: chemistry, self-assembly, and applications
Habibi, Y., Lucia, L. A., & Rojas, O. J. (2010) · Chemical Reviews · doi:10.1021/cr900339w · Cited by 5,980
Beck-Candanedo, S., Roman, M., & Gray, D. G. (2005) · Biomacromolecules · doi:10.1021/bm049300p · Cited by 1,588
Optimization of the isolation of nanocrystals from microcrystalline cellulose by acid hydrolysis
Bondeson, D., Mathew, A., & Oksman, K. (2006) · Cellulose · doi:10.1007/s10570-006-9061-4 · Cited by 1,372
Elastic modulus and stress-transfer properties of tunicate cellulose whiskers
Šturcová, A., Davies, G. R., & Eichhorn, S. J. (2005) · Biomacromolecules · doi:10.1021/bm049291k · Cited by 953
Cited by
Wood-Derived Materials for Green Electronics, Biological Devices, and Energy Applications
Zhu, H., Luo, W., Ciesielski, P. N., Fang, Z., Zhu, J. Y., Henriksson, G., Himmel, M. E., & Hu, L. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00225 · Cited by 1,532
Self-citationCurrent characterization methods for cellulose nanomaterials
Foster, E. J., Moon, R. J., Agarwal, U. P., Bortner, M. J., Bras, J., Camarero-Espinosa, S., Chan, K. J., Clift, M. J. D., Cranston, E. D., Eichhorn, S. J., et al. (2018) · Chemical Society Reviews · doi:10.1039/c6cs00895j · Cited by 1,021
Klemm, D., Cranston, E. D., Fischer, D., Gama, M., Kedzior, S. A., Kralisch, D., Kramer, F., Kondo, T., Lindström, T., Nietzsche, S., et al. (2018) · Materials Today · doi:10.1016/j.mattod.2018.02.001 · Cited by 936
Advanced Nanocellulose‐Based Composites for Flexible Functional Energy Storage Devices
Xu, T., Du, H., Liu, H., Liu, W., Zhang, X., Si, C., Liu, P., & Zhang, K. (2021) · Advanced Materials · doi:10.1002/adma.202101368 · Cited by 696
Benchmarking Cellulose Nanocrystals: From the Laboratory to Industrial Production
Reid, M. S., Villalobos, M., & Cranston, E. D. (2017) · Langmuir · doi:10.1021/acs.langmuir.6b03765 · Cited by 518
Metadata
- Authors
- Wang, Q., Zhao, X., & Zhu, J. Y.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-06-25
- Volume
- 53
- Issue
- 27
- Pages
- 11007-11014
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2108772044
- Cited by
- 170
- References
- 5
- FWCI
- 4.78
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Kinetics of Strong Acid Hydrolysis of a Bleached Kraft Pulp for Producing Cellulose Nanocrystals (CNCs). https://app.cochat.ai/papers/10.1021/ie501672m
- The paper
- Wang, Q., Zhao, X., & Zhu, J. Y. (2014). Kinetics of Strong Acid Hydrolysis of a Bleached Kraft Pulp for Producing Cellulose Nanocrystals (CNCs). Industrial & Engineering Chemistry Research. https://doi.org/10.1021/ie501672m
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.