The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Inkjet Printing Patterns of Highly Conductive Pristine Graphene on Flexible Substrates
Open accessAbstract
Highly conductive pristine graphene electrodes were fabricated by inkjet printing using ethyl cellulose-stabilized ink prepared from pristine graphene. Pristine graphene was generated by exfoliation from graphite using ultrasound-assisted supercritical CO 2 . The ink, at concentrations up to 1 mg/mL, was stable for more than 9 months and had compatible fluidic characteristics for efficient and reliable inkjet printing. The inkjet printing patterns of the graphene on diverse substrates were uniform and continuous. After 30 printing passes and annealing at 300 °C for 30 min, the printed films developed a high conductivity of 9.24 × 10 3 S/m. The resistivity of the printed electrodes on the flexible substrates increased by less than 5% after 1000 bending cycles and by 5.3% under a folding angle of 180°. The presented exfoliated pristine graphene and the corresponding efficient methods for formulating the ink and fabricating conductive electrodes are expected to have high potential in applications involving graphene-based flexible electronic devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fine Structure Constant Defines Visual Transparency of Graphene
Nair, R. R., Blake, P., Grigorenko, A. N., Novoselov, K. S., Booth, T. J., Stauber, T., Peres, N. M. R., & Geim, A. K. (2008) · Science · doi:10.1126/science.1156965 · Cited by 9,084
Dynamic Molecular Structure of Plant Biomass-Derived Black Carbon (Biochar)
Keiluweit, M., Nico, P. S., Johnson, M. G., & Kleber, M. (2010) · Environmental Science & Technology · doi:10.1021/es9031419 · Cited by 3,230
Cited by
2D‐Crystal‐Based Functional Inks
Bonaccorso, F., Bartolotta, A., Coleman, J. N., & Backes, C. (2016) · Advanced Materials · doi:10.1002/adma.201506410 · Cited by 446
Flexible temperature sensors: A review
Arman Kuzubasoglu, B., & Kursun Bahadir, S. (2020) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2020.112282 · Cited by 369
Screen-Printing of a Highly Conductive Graphene Ink for Flexible Printed Electronics
He, P., Cao, J., Ding, H., Liu, C., Neilson, J., Li, Z., Kinloch, I. A., & Derby, B. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b04589 · Cited by 340
Rapid and Versatile Photonic Annealing of Graphene Inks for Flexible Printed Electronics
Secor, E. B., Ahn, B. Y., Gao, T. Z., Lewis, J. A., & Hersam, M. C. (2015) · Advanced Materials · doi:10.1002/adma.201502866 · Cited by 334
Afroj, S., Tan, S., Abdelkader, A. M., Novoselov, K. S., & Karim, N. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000293 · Cited by 317
Metadata
- Authors
- Gao, Y., Shi, W., Wang, W., Leng, Y., & Zhao, Y.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-10-16
- Volume
- 53
- Issue
- 43
- Pages
- 16777-16784
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2318352663
- Cited by
- 189
- References
- 2
- FWCI
- 7.25
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Inkjet Printing Patterns of Highly Conductive Pristine Graphene on Flexible Substrates. https://app.cochat.ai/papers/10.1021/ie502675z
- The paper
- Gao, Y., Shi, W., Wang, W., Leng, Y., & Zhao, Y. (2014). Inkjet Printing Patterns of Highly Conductive Pristine Graphene on Flexible Substrates. Industrial & Engineering Chemistry Research. https://doi.org/10.1021/ie502675z
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.