HZSM-5 and HY Zeolite Catalyst Performance in the Pyrolysis of Tires in a Conical Spouted Bed Reactor
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
A study has been carried out on the in situ use of two catalysts (prepared based on HZSM-5 and HY zeolites) in the pyrolysis of tires in a conical spouted bed reactor at 425 and 500 °C. Both catalysts significantly affect the yields and composition obtained in thermal pyrolysis for the fractions corresponding to C 1 −C 4 gases, nonaromatic C 5 −C 10, aromatic C 10−, and tar. The shape selectivity characteristic of each zeolite has a considerable influence on catalyst performance. The HZSM-5 zeolite catalyst produces an increase in the yield of gases, with an increase in the yield of propene and the same yield of butadiene as in thermal pyrolysis, in which it is already high. Concerning the liquid fraction, the catalysts give way to a decrease in the yield of d-limonene (the conical spouted bed reactor performs very well in thermal pyrolysis for this purpose), whereas the yield of BTX aromatics increases, with an increase in the yield of xylenes. A positive fact to be noted is the decrease in the formation of tar (C 10+ ) compared to thermal pyrolysis. As the reaction occurs, a carbonaceous material is deposited on the catalyst, in which the following are identified: (i) carbon black externally coating the particles and deposited on the catalyst macropores and mesopores and (ii) coke deposited on zeolite micropores, due to hydrocarbon condensation activated by catalyst active sites. This condensation preferably takes place in the HY zeolite due to both the larger size of intersections between micropore channels and to greater hydrogen-transfer capacity. Nevertheless, under the reaction conditions tested (up to 10.87 g of tire treated/g of catalyst), product yields remain almost constant, which is evidence that the catalyst does not undergo deactivation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chromatographic analysis of the gases obtained in tyre pyrolysis
Laresgoiti, M. F., de Marco, I., Torres, A., Caballero, B., Cabrero, M. A., & Chomón, M. J. (2000) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(99)00073-x · Cited by 139
Cited by
Waste tyre valorization by catalytic pyrolysis – A review
Arabiourrutia, M., Lopez, G., Artetxe, M., Alvarez, J., Bilbao, J., & Olazar, M. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.109932 · Cited by 284
Self-citationLiquefaction of waste tires by pyrolysis for oil and chemicals—A review
Quek, A., & Balasubramanian, R. (2013) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2013.02.016 · Cited by 279
Arabiourrutia, M., Elordi, G., Lopez, G., Borsella, E., Bilbao, J., & Olazar, M. (2012) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.12.012 · Cited by 275
Self-citationOpportunities and barriers for producing high quality fuels from the pyrolysis of scrap tires
Hita, I., Arabiourrutia, M., Olazar, M., Bilbao, J., Arandes, J. M., & Castaño, P. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.11.081 · Cited by 268
Self-citationPyrolysis of Waste Tires: A Review
Han, W., Han, D., & Chen, H. (2023) · Polymers · doi:10.3390/polym15071604 · Cited by 202
“[67,77] found that through the usage of the molecular sieve USY catalyst and the HZSM-5 catalyst, high concentrations of monocycle aromatics—such as benzene, toluene, and xylene—could be prepared, and at the same time, the oil yield could be reduced and the gas phase yield improved.”
Background
Metadata
- Authors
- Arabiourrutia, M., Olazar, M., Aguado, R., López, G., Barona, A., & Bilbao, J.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2008-09-10
- Volume
- 47
- Issue
- 20
- Pages
- 7600-7609
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2033756222
- Cited by
- 79
- References
- 1
- FWCI
- 2.77
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.