The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
One-Part Geopolymer Mixes from Geothermal Silica and Sodium Aluminate
Abstract
In geopolymer technology, silicate solutions are frequently used as alkali activators to dissolve the solid aluminosilicate precursor and aid in binder formation. These corrosive and often viscous solutions are not user-friendly and would be difficult to use for bulk production. Developing geopolymers as a one-part mixture (“just add water”), similar to Portland cement, increases their commercial viability. Here, for the first time, the geopolymer system consisting of geothermal silica and solid sodium aluminate (providing the solid silica, alkali, and alumina sources) is studied. The effects of water content, high early silica, and high early alumina in the formation of one-part mix geopolymers are also investigated. This system demonstrates that making geopolymers from solid sources by “just adding water” is possible. XRD shows that the formulation with less water has an unexpected greater extent of crystallinity. It is also observed that a high early Al concentration inhibits geopolymerization, while a high early Si concentration enhances the reaction.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Modelling chloride diffusion in concrete
Thomas, M. D. A., & Bamforth, P. B. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(98)00192-6 · Cited by 665
Cited by
One-part alkali-activated materials: A review
Luukkonen, T., Abdollahnejad, Z., Yliniemi, J., Kinnunen, P., & Illikainen, M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.10.001 · Cited by 1,456
Wan, Q., Rao, F., Song, S., García, R. E., Estrella, R. M., Patiño, C. L., & Zhang, Y. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.01.014 · Cited by 481
Study on solids-to-liquid and alkaline activator ratios on kaolin-based geopolymers
Heah, C. Y., Kamarudin, H., Mustafa Al Bakri, A. M., Bnhussain, M., Luqman, M., Khairul Nizar, I., Ruzaidi, C. M., & Liew, Y. M. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.04.102 · Cited by 401
Zhao, J., Tong, L., Li, B., Chen, T., Wang, C., Yang, G., & Zheng, Y. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.127085 · Cited by 369
Geopolymer concrete as sustainable material: A state of the art review
Farooq, F., Jin, X., Faisal Javed, M., Akbar, A., Izhar Shah, M., Aslam, F., & Alyousef, R. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.124762 · Cited by 344
Metadata
- Authors
- Hajimohammadi, A., Provis, J. L., & van Deventer, J. S. J.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2008-10-29
- Volume
- 47
- Issue
- 23
- Pages
- 9396-9405
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2092083373
- Cited by
- 239
- References
- 1
- FWCI
- 11.03
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.