Carbon Capture by Sorption-Enhanced Water−Gas Shift Reaction Process using Hydrotalcite-Based Material
The DOI matches its Crossref record.
Abstract
A novel route for precombustion decarbonization is the sorption-enhanced water−gas shift (SEWGS) process. In this process carbon dioxide is removed from a synthesis gas at elevated temperature by adsorption. Simultaneously, carbon monoxide is converted to carbon dioxide by the water−gas shift reaction. The periodic adsorption and desorption of carbon dioxide is induced by a pressure swing cycle, and the cyclic capacity can be amplified by purging with steam. From previous studies is it known that for SEWGS applications, hydrotalcite-based materials are particularly attractive as sorbent, and commercial high-temperature shift catalysts can be used for the conversion of carbon monoxide. Tablets of a potassium promoted hydrotalcite-based material are characterized in both breakthrough and cyclic experiments in a 2 m tall fixed-bed reactor. When exposed to a mixture of carbon dioxide, steam, and nitrogen at 400 °C, the material shows a breakthrough capacity of 1.4 mmol/g. The sharp adsorption front is accompanied by an exotherm that travels along the bed. Even after breakthrough carbon dioxide continues to be taken up by the bed albeit at a much lower rate. It is shown that the total capacity of this material can exceed 10 mmol/g, which has not been reported before. Desorption curves indicate efficiencies of removing additional carbon dioxide by purging with low-pressure, superheated steam at various flow rates. During cyclic operation for more than 1400 adsorption and desorption cycles, the carbon dioxide slip is very low and remains stable which indicates that carbon recoveries well above 90% can be obtained. The sorbent shows a stable cyclic capacity of 0.66 mmol/g. In subsequent experiments the material was mixed with tablets of promoted iron−chromium shift catalyst and exposed to a mixture of carbon dioxide, carbon monoxide, steam, hydrogen, and nitrogen. It is demonstrated that carbon monoxide conversion can be enhanced to 100% in the presence of a carbon dioxide sorbent. At breakthrough, carbon monoxide and carbon dioxide simultaneously appear at the end of the bed. During more than 300 cycles of adsorption/reaction and desorption, the capture rate, and carbon monoxide conversion are confirmed to be stable. Two different cycle types are investigated: one cycle with a CO 2 rinse step and one cycle with a steam rinse step. The performance of both SEWGS cycles are discussed. These experimental results will allow optimization of process conditions and cycle parameters, and especially the reduction of steam consumption needed for sorbent regeneration. The results will provide the basis for scale-up to a pilot unit, which will demonstrate precombustion decarbonization in fossil-fuels-based power generation or hydrogen production.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
CO2 capture by solid adsorbents and their applications: current status and new trends
Wang, Q., Luo, J., Zhong, Z., & Borgna, A. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00064g · Cited by 1,611
Carbon Capture and Utilization Update
Al‐Mamoori, A., Krishnamurthy, A., Rownaghi, A. A., & Rezaei, F. (2017) · Energy Technology · doi:10.1002/ente.201600747 · Cited by 719
Bernal, S. A., San Nicolas, R., Myers, R. J., Mejía de Gutiérrez, R., Puertas, F., van Deventer, J. S. J., & Provis, J. L. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.12.003 · Cited by 493
Hydrogen production with CO2 capture
Voldsund, M., Jordal, K., & Anantharaman, R. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.01.009 · Cited by 493
Water gas shift reaction for hydrogen production and carbon dioxide capture: A review
Chen, W.-H., & Chen, C.-Y. (2020) · Applied Energy · doi:10.1016/j.apenergy.2019.114078 · Cited by 486
Jansen, D., Gazzani, M., Manzolini, G., Dijk, E. V., & Carbo, M. (2015) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2015.05.028 · Cited by 430
Recent advances in capture of carbon dioxide using alkali-metal-based oxides
Wang, S., Yan, S., Ma, X., & Gong, J. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01116b · Cited by 382
Ahmed, N., Shibata, Y., Taniguchi, T., & Izumi, Y. (2011) · Journal of Catalysis · doi:10.1016/j.jcat.2011.01.004 · Cited by 288
Riboldi, L., & Bolland, O. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.03.1385 · Cited by 256
Zhu, X., Li, S., Shi, Y., & Cai, N. (2019) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2019.100784 · Cited by 129
Multiphase carbon mineralization for the reactive separation of CO2 and directed synthesis of H2
Gadikota, G. (2020) · Nature Reviews Chemistry · doi:10.1038/s41570-019-0158-3 · Cited by 95
Metadata
- Authors
- van Selow, E. R., Cobden, P. D., Verbraeken, P. A., Hufton, J. R., & van den Brink, R. W.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-04-08
- Volume
- 48
- Issue
- 9
- Pages
- 4184-4193
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2077965701
- Cited by
- 155
- References
- 0
- FWCI
- 17.30
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.