Biomass Screening for the Production of Furfural via Thermal Decomposition
The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
Packed-bed pyrolysis (heating temperature 800 K) is studied of beech and fir wood, several agro-industrial residues (corn cobs and stalks, olive husks, wheat straw, hazelnut and almond shells, orange peels, grape residues, artichoke stems, brewer’s spent grain, and pruning cuts from cherry, olive, vine, and poplar trees) and cellulose, aimed at determining the potentially most promising feedstock for the production of furfural. Parameters associated with conversion dynamics are mainly affected by the packed-bed density (0.1−1.1 g/cm 3 ) whereas products mainly depend upon the feedstock chemical composition. In particular, the yields of condensable organic products increase with the holocellulose content (10−85%) up to 25−40% (dry sample mass basis). The higher yields of furfural (dry organics mass basis), in the range 2−0.8%, are obtained from feedstocks with significant contents of cellulose/pentoses (corn cobs, almond shells, hardwoods such as beech, cherry, olive, and poplar woods, orange peels, corn stalks, and hazelnut shells), while interesting quantities (approximately 1−0.4%) of 2(5 H )-furanone are observed in all cases. As expected, the highest yields of hydroxyacetaldehyde and levoglucosan (about 8 and 3%) are produced from fir wood. On the other hand, some agro-industrial residues (hazelnut and almond shells and olive husks), apart from acetic acid, also produce high yields of phenolic compounds.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review
Mohan, D., Pittman, C. U., & Steele, P. H. (2006) · Energy & Fuels · doi:10.1021/ef0502397 · Cited by 5,663
Modeling chemical and physical processes of wood and biomass pyrolysis
DIBLASI, C. (2008) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2006.12.001 · Cited by 1,752
The Art, Science, and Technology of Charcoal Production
Antal, M. J., & Grønli, M. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0207919 · Cited by 1,623
Biorefineries: Current status, challenges, and future direction
Fernando, S., Adhikari, S., Chandrapal, C., & Murali, N. (2006) · Energy & Fuels · doi:10.1021/ef060097w · Cited by 709
Attainment of the Theoretical Yield of Carbon from Biomass
Antal, M. J., Allen, S. G., Dai, X., Shimizu, B., Tam, M. S., & Grønli, M. (2000) · Industrial & Engineering Chemistry Research · doi:10.1021/ie000511u · Cited by 265
Cited by
Lignocellulosic biomass pyrolysis mechanism: A state-of-the-art review
Wang, S., Dai, G., Yang, H., & Luo, Z. (2017) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2017.05.004 · Cited by 2,595
Catalytic conversion of lignocellulosic biomass to fine chemicals and fuels
Zhou, C.-H., Xia, X., Lin, C.-X., Tong, D.-S., & Beltramini, J. (2011) · Chemical Society Reviews · doi:10.1039/c1cs15124j · Cited by 1,420
Kumar, B., Bhardwaj, N., Agrawal, K., Chaturvedi, V., & Verma, P. (2020) · Fuel Processing Technology · doi:10.1016/j.fuproc.2019.106244 · Cited by 743
Reaction mechanisms and multi-scale modelling of lignocellulosic biomass pyrolysis
Anca-Couce, A. (2016) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2015.10.002 · Cited by 664
A Critical Review on Hemicellulose Pyrolysis
Zhou, X., Li, W., Mabon, R., & Broadbelt, L. J. (2017) · Energy Technology · doi:10.1002/ente.201600327 · Cited by 419
Metadata
- Authors
- Di Blasi, C., Branca, C., & Galgano, A.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-02-19
- Volume
- 49
- Issue
- 6
- Pages
- 2658-2671
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2093208155
- Cited by
- 121
- References
- 5
- FWCI
- 4.19
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Biomass Screening for the Production of Furfural via Thermal Decomposition. https://app.cochat.ai/papers/10.1021/ie901731u
- The paper
- Di Blasi, C., Branca, C., & Galgano, A. (2010). Biomass Screening for the Production of Furfural via Thermal Decomposition. Industrial & Engineering Chemistry Research. https://doi.org/10.1021/ie901731u
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.