CoChat

Synthesis and Optimization of a New Starch-Based Adsorbent for Dehumidification of Air in a Pressure-Swing Dryer

Anderson, Linda E., Gulati, Manish, Westgate, Paul J., Kvam, Eric P., Bowman, Keith, Ladisch, Michael R. · 1996 · Industrial & Engineering Chemistry Research

The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.

Abstract

Corn grits selectively adsorb water from many types of organic vapors and are used commercially to dry 2.8 billion L of fuel-grade fermentation ethanol annually. Evaluation of grits in a pressure-swing dryer at 308 kPa, combined with analyses of their physical properties, showed that the specific surface of the grits (0.5 m 2 /g) limited steady-state drying of air to a dewpoint of −20 °C. By selectively taking advantage of the best features of the natural material, a new class of natural adsorbents with a higher affinity for water was then synthesized using materials derived from corn: starch and cob flour. The chemical composition of the synthesized adsorbent was determined, as well as specific physical properties. Scanning electron microscopy showed the synthesized adsorbent surface had a large number of macropores (10−25 μm in diameter) unlike corn grits which have limited porosity. This material gave reasonable and reproducible results, similar to those obtained with molecular sieves using a commercially available pressure-swing air dryer. After 70 h of operation at 30 psi, the new adsorbent provided air at a dewpoint of −63 °C. The methods for preparing this material and an explanation of its performance in terms of macroscopic and microscopic structural characteristics are described.

Overview

Integrity signals

Registry

Crossref · 10.1021/ie9504213

Cites

13 of 13 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Citations

Cites

Show all 13 references

Research works printed but not linked: 7

  1. King, C. J.Separation Processes; McGraw-Hill: New York, 1971; p 118.
  2. Leach, H. W. Gelatinization of Starch.Starch: Chemistry and Technology; Academic Press: New York, 1965; p 289.
  3. Radley, J. A.Starch and Its Derivatives; Wiley and Sons: New York, 1954; Vol. 1, Chapter 5, p 81.
  4. Robertson G. H., Intensive Grain Use in Ethanol Fermentation and Separation. Am. Soc. Agr. Eng. 1983
  5. Rootare H. M., 1967, J. Phys. Chem., 2733, 2736
  6. Somasundaran, P., Ed.Fine Particle Processing; American Institute of Mining, Metallurgical, and Petroleum Engineers: New York, 1980; Vol. 1, p 418.
  7. Williams, B. H. Corrugating and Adhesive Industries.Modified Starches: Properties and Uses; CRC Press: Boca Raton, FL, 1985; p 254.

Cited by

Metadata

Authors
Anderson, L. E., Gulati, M., Westgate, P. J., Kvam, E. P., Bowman, K., & Ladisch, M. R.
Affiliations
Purdue University West Lafayette (US)
Venue
Industrial & Engineering Chemistry Research
Published
1996-01-01
Volume
35
Issue
4
Pages
1180-1187
ISSN
  • 0888-5885 (ISSN-L)
  • 1520-5045
OpenAlex
W2065216578
Cited by
27
References
13
Citations by year
2025: 1 · 2022: 2 · 2021: 1 · 2018: 2 · 2015: 1 · 2014: 1 · 2013: 3 · 2012: 2
FWCI
2.48
Type
journal article
Language
en
Open access
closed
Locations
Industrial & Engineering Chemistry Research (publishedVersion)
Topics
  • Physical Sciences › Engineering › Mechanical Engineering › Adsorption and Cooling Systems
  • Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
  • Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Adsorption, diffusion, and thermodynamic properties of materials
Keywords
starch-based adsorbents, corn grits, air dehumidification, water adsorption, ethanol dehydration, macroporosity, specific surface area, natural adsorbents, molecular sieves

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.