The DOI matches its Crossref record.
Efficient Recovery of Carbon Dioxide from Flue Gases of Coal-Fired Power Plants by Cyclic Fixed-Bed Operations over K2CO3-on-Carbon
Abstract
An efficient chemical absorption method capable of cyclic fixed-bed operations under moist conditions for the recovery of carbon dioxide from flue gases has been proposed employing K 2 CO 3 -on-carbon. Carbon dioxide was chemically absorbed by the reaction K 2 CO 3 + CO 2 + H 2 O ⇄ 2KHCO 3 to form potassium hydrogencarbonate. Moisture, usually contained as high as 8−17% in flue gases, badly affects the capacity of conventional adsorbents such as zeolites, but the present technology has no concern with moisture; water is rather necessary in principle as shown in the equation above. Deliquescent potassium carbonate should be supported on an appropriate porous material to adapt for fixed-bed operations. After breakthrough of carbon dioxide, the entrapped carbon dioxide was released by the decomposition of hydrogencarbonate to shift the reaction in Eq.1 in reverse on flushing with steam, which could be condensed by cooling to afford carbon dioxide in high purity. Among various preparations of alkaline-earth carbonates (X 2 CO 3, X = Li, Na, K) on porous materials, K 2 CO 3 -on-activated carbon revealed excellent properties for the present purpose. Preparation and characterization of K 2 CO 3 -on-carbon and illustrative fixed-bed operations under flue gas conditions in laboratory columns and a bench-scale plant are described.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Post-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889
CO2 capture by solid adsorbents and their applications: current status and new trends
Wang, Q., Luo, J., Zhong, Z., & Borgna, A. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00064g · Cited by 1,611
White, C. M., Strazisar, B. R., Granite, E. J., Hoffman, J. S., & Pennline, H. W. (2003) · Journal of the Air & Waste Management Association · doi:10.1080/10473289.2003.10466206 · Cited by 751
Air as the renewable carbon source of the future: an overview of CO2 capture from the atmosphere
Goeppert, A., Czaun, M., Surya Prakash, G. K., & Olah, G. A. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21586a · Cited by 724
Adsorption characteristics of carbon dioxide on organically functionalized SBA-15
Hiyoshi, N., Yogo, K., & Yashima, T. (2005) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2005.06.010 · Cited by 588
Metadata
- Authors
- Hayashi, H., Taniuchi, J., Furuyashiki, N., Sugiyama, S., Hirano, S., Shigemoto, N., & Nonaka, T.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 1998-01-01
- Volume
- 37
- Issue
- 1
- Pages
- 185-191
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2051548673
- Cited by
- 177
- References
- 0
- FWCI
- 6.48
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Efficient Recovery of Carbon Dioxide from Flue Gases of Coal-Fired Power Plants by Cyclic Fixed-Bed Operations over K2CO3-on-Carbon. https://app.cochat.ai/papers/10.1021/ie9704455
- The paper
- Hayashi, H., Taniuchi, J., Furuyashiki, N., Sugiyama, S., Hirano, S., Shigemoto, N., & Nonaka, T. (1998). Efficient Recovery of Carbon Dioxide from Flue Gases of Coal-Fired Power Plants by Cyclic Fixed-Bed Operations over K2CO3-on-Carbon. Industrial & Engineering Chemistry Research. https://doi.org/10.1021/ie9704455
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.