Recycling of Polyethene and Polypropene in a Novel Bench-Scale Rotating Cone Reactor by High-Temperature Pyrolysis
The DOI matches its Crossref record.
Abstract
The high-temperature pyrolysis of polyethene (PE), polypropene (PP), and mixtures of these polymers was studied in a novel bench-scale rotating cone reactor (RCR). Experiments showed that the effect of the sand or reactor temperature on the product spectrum obtained is large compared to the effect of other parameters (for instance, residence time). In general, it can be concluded that the amount of polymer converted into propene and butene decreases with higher cracking severity (higher temperatures or longer residence times), while the fraction methane increases. About 80 wt % of the polymer is converted into gas at a reactor temperature of 898 K, while 20 wt % is converted into intermediate waxlike compounds or aromatics in the case of PE. The gas yield increases slightly with the reactor and/or sand temperature to 88 wt % at higher temperatures. The total amount of alkenes decreases with increasing cracking intensity, which suggests that the reactor should be operated at the lowest possible temperature. Our results indicate that the reactor offers a few significant advantages compared to other reactors (no fluidization gas necessary, good solid−polymer mixing, no cyclones necessary) and a competitive product spectrum. However, significant improvements are still possible to make the reactor concept technically and economically more attractive.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Onwudili, J. A., Insura, N., & Williams, P. T. (2009) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2009.07.008 · Cited by 681
Butler, E., Devlin, G., & McDonnell, K. (2011) · Waste and Biomass Valorization · doi:10.1007/s12649-011-9067-5 · Cited by 270
Biomass pyrolysis technologies for value-added products: a state-of-the-art review
Amenaghawon, A. N., Anyalewechi, C. L., Okieimen, C. O., & Kusuma, H. S. (2021) · Environment, Development and Sustainability · doi:10.1007/s10668-021-01276-5 · Cited by 260
Liu, Y., Qian, J., & Wang, J. (2000) · Fuel Processing Technology · doi:10.1016/s0378-3820(99)00066-1 · Cited by 246
Abbas-Abadi, M. S., Ureel, Y., Eschenbacher, A., Vermeire, F. H., Varghese, R. J., Oenema, J., Stefanidis, G. D., & Van Geem, K. M. (2023) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2022.101046 · Cited by 221
Poutsma, M. L. (2003) · Macromolecules · doi:10.1021/ma0303768 · Cited by 114
Development of materials and technologies for control of polymer recycling
Nishida, H. (2011) · Polymer Journal · doi:10.1038/pj.2011.16 · Cited by 94
Metadata
- Authors
- Westerhout, R. W. J., Waanders, J., Kuipers, J. A. M., & van Swaaij, W. P. M.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 1998-05-08
- Volume
- 37
- Issue
- 6
- Pages
- 2293-2300
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2097914772
- Cited by
- 88
- References
- 0
- FWCI
- 2.90
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.