Challenges and opportunities of light olefin production via thermal and catalytic pyrolysis of end-of-life polyolefins: Towards full recyclability
Open accessThe DOI matches its Crossref record; 291 of the 291 references it cites were found in a registry or an index.
Abstract
Is full recyclability of polyolefins via chemical recycling a dream, or can it become a reality? The main problem in recycling plastic waste is that its composition is highly heterogeneous while sorting and purifying solutions to obtain mono-streams are complex and require large investments, thereby hampering the economy of scale. Ideally, novel chemical recycling processes are designed to have mixed plastic wastes as input and higher value products are produced such as C2–C4 olefins or aromatics instead of a low value oil. In this review we show the directions how we can realize these objectives. Classical thermal pyrolysis offers some possibilities but requires very high temperatures exceeding 800 °C to transform the plastic waste back into the desired temperatures. Nevertheless, because of its robustness, thermal pyrolysis of polyolefinic plastic waste is currently intensively studied and the first industrial applications are operated at low to medium temperature range to maximize oil as the main product. Catalytic pyrolysis is still under development, but under ideal lab-scale conditions around 85 wt.% of C2–C4 olefins can be produced when pure polyolefin feeds are used. With improved catalyst design it should be possible to get this number further up without affecting the catalyst stability. As the yield of light olefins in pyrolysis is impacted by both the process design (reactor type, the efficiency of plastic sorting prior to conversion, flexibility towards feed composition) and experimental parameters (temperature, catalyst type, catalyst/feed ratio, contact mode, residence time, addition of inert or reactants) also further improvements are possible in this respect. To industrialize pyrolysis of plastic waste, short residence times (<1 s) are crucial to avoid secondary reactions and by-products such as methane, coke, and aromatics. Pyrolysis reactors that are designed according to these principles, such as downers, spouted fluidized bed, and vortex reactors, are envisaged to result in optimal yields of C2–C4 olefins. However, coke formation seems to be inevitable and the reactor designs need to be sufficiently robust to allow for in-situ coke removal. For future research it will be crucial for the industrial viability of plastic waste pyrolysis to improve the purification of the plastic waste stream, optimize both the catalysts selectivity and stability, and design a suitable industrial reactor. It is envisaged that further innovations in these three areas will eventually allow reaching the 90 wt.% target.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Production, use, and fate of all plastics ever made
Geyer, R., Jambeck, J. R., & Law, K. L. (2017) · Science Advances · doi:10.1126/sciadv.1700782 · Cited by 18,606
Perry's chemical engineers' handbook
(2008) · Choice Reviews Online · doi:10.5860/choice.45-4393 · Cited by 10,121
The ecoinvent database version 3 (part I): overview and methodology
Wernet, G., Bauer, C., Steubing, B., Reinhard, J., Moreno-Ruiz, E., & Weidema, B. (2016) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-016-1087-8 · Cited by 5,564
Hahladakis, J. N., Velis, C. A., Weber, R., Iacovidou, E., & Purnell, P. (2018) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2017.10.014 · Cited by 3,873
Mechanical and chemical recycling of solid plastic waste
Ragaert, K., Delva, L., & Van Geem, K. (2017) · Waste Management · doi:10.1016/j.wasman.2017.07.044 · Cited by 3,276
Biological degradation of plastics: A comprehensive review
Shah, A. A., Hasan, F., Hameed, A., & Ahmed, S. (2008) · Biotechnology Advances · doi:10.1016/j.biotechadv.2007.12.005 · Cited by 2,765
(1991) · Elsevier eBooks · doi:10.1016/c2009-0-24190-0 · Cited by 2,595
A review on pyrolysis of plastic wastes
Anuar Sharuddin, S. D., Abnisa, F., Wan Daud, W. M. A., & Aroua, M. K. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.037 · Cited by 2,126
Hydrocarbon Bond Dissociation Energies
McMillen, D. F., & Golden, D. M. (1982) · Annual Review of Physical Chemistry · doi:10.1146/annurev.pc.33.100182.002425 · Cited by 2,005
Beyond Mechanical Recycling: Giving New Life to Plastic Waste
Vollmer, I., Jenks, M. J. F., Roelands, M. C. P., White, R. J., van Harmelen, T., de Wild, P., van der Laan, G. P., Meirer, F., Keurentjes, J. T. F., & Weckhuysen, B. M. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201915651 · Cited by 1,905
Cited by
Campuzano, F., Martínez, J. D., Agudelo Santamaría, A. F., Sarathy, S. M., & Roberts, W. L. (2023) · Energy & Fuels · doi:10.1021/acs.energyfuels.3c00847 · Cited by 51
van Akker, M., Strien, J. R. J., Genuino, H. C., van Eijk, M. C. P., Schenk, N. J., Heeres, H. J., & Deuss, P. J. (2025) · Energy & Fuels · doi:10.1021/acs.energyfuels.4c05631 · Cited by 25
Veksha, A., Lu, J., Tsakadze, Z., Chen, W., & Lisak, G. (2024) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2024.142074 · Cited by 15
Metadata
- Authors
- Abbas-Abadi, M. S., Ureel, Y., Eschenbacher, A., Vermeire, F. H., Varghese, R. J., Oenema, J., Stefanidis, G. D., & Van Geem, K. M.
- Venue
- Progress in Energy and Combustion Science
- Publisher
- Elsevier BV
- Published
- 2023-05
- Volume
- 96
- Pages
- 101046
- ISSN
- 0360-1285 (ISSN-L)
- OpenAlex
- W4320713585
- Cited by
- 221
- References
- 291
- FWCI
- 16.21
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Challenges and opportunities of light olefin production via thermal and catalytic pyrolysis of end-of-life polyolefins: Towards full recyclability. https://app.cochat.ai/papers/10.1016/j.pecs.2022.101046
- The paper
- Abbas-Abadi, M. S., Ureel, Y., Eschenbacher, A., Vermeire, F. H., Varghese, R. J., Oenema, J., Stefanidis, G. D., & Van Geem, K. M. (2023). Challenges and opportunities of light olefin production via thermal and catalytic pyrolysis of end-of-life polyolefins: Towards full recyclability. Progress in Energy and Combustion Science. https://doi.org/10.1016/j.pecs.2022.101046
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.