The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
Product Distribution from Pyrolysis of Wood and Agricultural Residues
Abstract
The pyrolysis characteristics of agricultural residues (wheat straw, olive husks, grape residues, and rice husks) and wood chips have been investigated on a bench scale. The experimental system establishes the conditions encountered by a thin (4 × 10 -2 m diameter) packed bed of biomass particles suddenly exposed in a high-temperature environment, simulated by a radiant furnace. Product yields (gases, liquids, and char) and gas composition, measured for surface bed temperatures in the range 650−1000 K, reproduce trends already observed for wood. However, differences are quantitatively large. Pyrolysis of agricultural residues is always associated with much higher solid yields (up to a factor of 2) and lower liquid yields. Differences are lower for the total gas, and approximate relationships exist among the ratios of the main gas species yields, indicating comparable activation energies for the corresponding apparent kinetics of formation. However, while the ratios are about the same for wood chips, rice husks, and straw, much lower values are shown by olive and grape residues. Large differences have also been found in the average values of the specific devolatilization rates. The fastest (up to factors of about 1.5 with respect to wood) have been observed for wheat straw and the slowest (up to factors of 2) for grape residues.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellulose Pyrolysis Kinetics: The Current State of Knowledge
Antal, M. J. J., & Varhegyi, G. (1995) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00042a001 · Cited by 859
Modeling and simulation of combustion processes of charring and non-charring solid fuels
Di Blasi, C. (1993) · Progress in Energy and Combustion Science · doi:10.1016/0360-1285(93)90022-7 · Cited by 494
Self-citationProduct yields and kinetics from the vapor phase cracking of wood pyrolysis tars
Boroson, M. L., Howard, J. B., Longwell, J. P., & Peters, W. A. (1989) · AIChE Journal · doi:10.1002/aic.690350113 · Cited by 350
A KINETIC MODEL FOR THE PRODUCTION OF LIQUIDS FROM THE FLASH PYROLYSIS OF BIOMASS
LIDEN, A. G., BERRUTI, F., & SCOTT, D. S. (1988) · Chemical Engineering Communications · doi:10.1080/00986448808940254 · Cited by 286
Rapid high-temperature pyrolysis of biomass in a free-fall reactor
Zanzi, R., Sjöström, K., & Björnbom, E. (1996) · Fuel · doi:10.1016/0016-2361(95)00304-5 · Cited by 264
Liquid products from the continuous flash pyrolysis of biomass
Scott, D. S., Piskorz, J., & Radlein, D. (1985) · Industrial & Engineering Chemistry Process Design and Development · doi:10.1021/i200030a011 · Cited by 257
The continuous flash pyrolysis of biomass
Scott, D. S., & Piskorz, J. (1984) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.5450620319 · Cited by 254
The role of temperature in the fast pyrolysis of cellulose and wood
Scott, D. S., Piskorz, J., Bergougnou, M. A., Graham, R., & Overend, R. P. (1988) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00073a003 · Cited by 241
The flash pyrolysis of aspen‐poplar wood
Scott, D. S., & Piskorz, J. (1982) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.5450600514 · Cited by 234
Kinetic and Heat Transfer Control in the Slow and Flash Pyrolysis of Solids
Di Blasi, C. (1996) · Industrial & Engineering Chemistry Research · doi:10.1021/ie950243d · Cited by 230
Self-citationProduct compositions and kinetics in the rapid pyrolysis of sweet gum hardwood
Nunn, T. R., Howard, J. B., Longwell, J. P., & Peters, W. A. (1985) · Industrial & Engineering Chemistry Process Design and Development · doi:10.1021/i200030a053 · Cited by 217
Encinar, J. M., Beltrán, F. J., Bernalte, A., Ramiro, A., & González, J. F. (1996) · Biomass and Bioenergy · doi:10.1016/s0961-9534(96)00029-3 · Cited by 208
The pyrolysis of rice husks in a thermogravimetric analyser and static batch reactor
Williams, P. T., & Besler, S. (1993) · Fuel · doi:10.1016/0016-2361(93)90391-e · Cited by 192
Formation of charcoal from biomass in a sealed reactor
Mok, W. S. L., Antal, M. J., Szabo, P., Varhegyi, G., & Zelei, B. (1992) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00004a027 · Cited by 171
Pyrolytic Reactions and Products of Biomass
Shafizadeh, F. (1985) · Springer eBooks · doi:10.1007/978-94-009-4932-4_11 · Cited by 168
A study on the production of agricultural residues in Italy
Blasi, C. D., Tanzi, V., & Lanzetta, M. (1997) · Biomass and Bioenergy · doi:10.1016/s0961-9534(96)00073-6 · Cited by 158
Biomass Pyrolysis: A Review of the Literature Part 2—Lignocellulose Pyrolysis
Antal, M. J. (1985) · Springer eBooks · doi:10.1007/978-1-4613-9951-3_4 · Cited by 127
Influences of physical properties on biomass devolatilization characteristics
Blasi, C. D. (1997) · Fuel · doi:10.1016/s0016-2361(97)00096-3 · Cited by 112
Single-particle biomass pyrolysis: correlations of reaction products with process conditions
Chan, W. C. R., Kelbon, M., & Krieger‐Brockett, B. (1988) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00084a012 · Cited by 91
Combustion Characteristics of Biomass Fuels
Kanury, A. M. (1994) · Combustion Science and Technology · doi:10.1080/00102209408935391 · Cited by 68
Temperature profiles and weight loss in the thermal decomposition of large spherical wood particles
Bilbao, R., Millera, Á., & Murillo, M. B. (1993) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00021a003 · Cited by 56
Pyrolysis of holm-oak wood: influence of temperature and particle size
Figueiredo, J. L., Valenzuela, C., Bernalte, A., & Encinar, J. M. (1989) · Fuel · doi:10.1016/0016-2361(89)90067-7 · Cited by 56
Cited by
Sustainable biochar to mitigate global climate change
Woolf, D., Amonette, J. E., Street-Perrott, F. A., Lehmann, J., & Joseph, S. (2010) · Nature Communications · doi:10.1038/ncomms1053 · Cited by 2,680
Lignocellulosic biomass pyrolysis mechanism: A state-of-the-art review
Wang, S., Dai, G., Yang, H., & Luo, Z. (2017) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2017.05.004 · Cited by 2,595
Modeling chemical and physical processes of wood and biomass pyrolysis
DIBLASI, C. (2008) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2006.12.001 · Cited by 1,752
Kambo, H. S., & Dutta, A. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.01.050 · Cited by 1,746
The Art, Science, and Technology of Charcoal Production
Antal, M. J., & Grønli, M. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0207919 · Cited by 1,623
Metadata
- Authors
- Di Blasi, C., Signorelli, G., Di Russo, C., & Rea, G.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 1999-05-13
- Volume
- 38
- Issue
- 6
- Pages
- 2216-2224
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2015285657
- Cited by
- 441
- References
- 22
- FWCI
- 4.90
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.