The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Porous MoS2 Synthesized by Ultrasonic Spray Pyrolysis
Abstract
The hydrodesulfurization (HDS) activity of molybdenum sulfide-based catalysts is localized to the edges of this layered solid and is, therefore, highly dependent on the technique used to prepare the material. Here, ultrasonic spray pyrolysis (USP) was used to synthesize porous, nanostructured MoS2. Low surface area powders, not useful for catalysis, are generally produced by USP. This work shows that when combined with a dissolvable template, USP is capable of producing high surface area materials. An aqueous solution of ammonium tetrathiomolybdate and colloidal silica was nebulized and pyrolyzed to give a MoS2/SiO2 composite material. Leaching with HF removed the sacrificial SiO2, resulting in a highly porous MoS2 network with surface areas as high as 250 m2/g. Cobalt-promoted MoS2 networks were also synthesized. The thiophene HDS activities of these materials were substantially higher than those of unsupported MoS2 and RuS2 standards, illustrating the enhanced dispersion of the HDS active phase achieved by this synthetic technique.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Versatility of chemical spray pyrolysis technique
Patil, P. S. (1999) · Materials Chemistry and Physics · doi:10.1016/s0254-0584(99)00049-8 · Cited by 731
Cited by
Kibsgaard, J., Chen, Z., Reinecke, B. N., & Jaramillo, T. F. (2012) · Nature Materials · doi:10.1038/nmat3439 · Cited by 3,234
Applications of Ultrasound to the Synthesis of Nanostructured Materials
Bang, J. H., & Suslick, K. S. (2010) · Advanced Materials · doi:10.1002/adma.200904093 · Cited by 1,895
Self-citationTransition metal phosphide hydroprocessing catalysts: A review
Oyama, S. T., Gott, T., Zhao, H., & Lee, Y.-K. (2009) · Catalysis Today · doi:10.1016/j.cattod.2008.09.019 · Cited by 792
Beyond Graphene: Progress in Novel Two-Dimensional Materials and van der Waals Solids
Das, S., Robinson, J. A., Dubey, M., Terrones, H., & Terrones, M. (2015) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070214-021034 · Cited by 640
Three‐Dimensional Assembly of Single‐Layered MoS2
Wang, P., Sun, H., Ji, Y., Li, W., & Wang, X. (2014) · Advanced Materials · doi:10.1002/adma.201304120 · Cited by 447
He, Z., & Que, W. (2016) · Applied Materials Today · doi:10.1016/j.apmt.2016.02.001 · Cited by 438
Liang, X., Zhang, X., Liu, W., Tang, D., Zhang, B., & Ji, G. (2016) · Journal of Materials Chemistry C · doi:10.1039/c6tc02006b · Cited by 276
Preparation of porous MoS2 via a sol–gel route using (NH4)2Mo3S13 as precursor
Li, N., Chai, Y., Dong, B., Liu, B., Guo, H., & Liu, C. (2012) · Materials Letters · doi:10.1016/j.matlet.2012.08.031 · Cited by 25
Metadata
- Authors
- Skrabalak, S. E., & Suslick, K. S.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2005-06-25
- Volume
- 127
- Issue
- 28
- Pages
- 9990-9991
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2062988933
- Cited by
- 247
- References
- 1
- FWCI
- 38.52
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.