The DOI matches its Crossref record; 18 of the 18 references it cites were found in a registry or an index.
Spinodal Decomposition and Nucleation and Growth as a Means to Bulk Nanostructured Thermoelectrics: Enhanced Performance in Pb1-xSnxTe−PbS
Abstract
The solid-state transformation phenomena of spinodal decomposition and nucleation and growth are presented as tools to create nanostructured thermoelectric materials with very low thermal conductivity and greatly enhanced figure of merit. The systems (PbTe)(1-x)(PbS)(x) and (Pb(0.95)Sn(0.05)Te)(1-x)(PbS)(x) are not solid solutions but phase separate into PbTe-rich and PbS-rich regions to produce coherent nanoscale heterogeneities that severely depress the lattice thermal conductivity. For x > approximately 0.03 the materials are ordered on three submicrometer length scales. Transmission electron microscopy reveals both spinodal decomposition and nucleation and growth phenomena the relative magnitude of which varies with x. We show that the (Pb(0.95)Sn(0.05)Te)(1-x)(PbS)(x) system, despite its nanostructured nature, maintains a high electron mobility (>100 cm(2)/V x s at 700 K). At x approximately 0.08 the material achieves a very low room-temperature lattice thermal conductivity of approximately 0.4 W/m x K. This value is only 28% of the PbTe lattice thermal conductivity at room temperature. The inhibition of heat flow in this system is caused by nanostructure-induced acoustic impedance mismatch between the PbTe-rich and PbS-rich regions. As a result the thermoelectric properties of (Pb(0.95)Sn(0.05)Te)(1-x)(PbS)(x) at x = 0.04, 0.08, and 0.16 were found to be superior to those of PbTe by almost a factor of 2. The relative importance of the two observed modes of nanostructuring, spinodal decomposition and nucleation and growth, in suppressing the thermal conductivity was assessed in this work, and we can conclude that the latter mode seems more effective in doing so. The promise of such a system for high efficiency is highlighted by a ZT approximately 1.50 at 642 K for x approximately 0.08.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Introduction to Solid State Physics
Kittel, C., & Dexter, D. L. (1953) · American Journal of Physics · doi:10.1119/1.1933590 · Cited by 13,240
Thin-film thermoelectric devices with high room-temperature figures of merit
Venkatasubramanian, R., Siivola, E., Colpitts, T., & O'Quinn, B. (2001) · Nature · doi:10.1038/35098012 · Cited by 5,205
Effect of quantum-well structures on the thermoelectric figure of merit
Hicks, L. D., & Dresselhaus, M. S. (1993) · Physical Review B · doi:10.1103/physrevb.47.12727 · Cited by 3,749
Swartz, E. T., & Pohl, R. O. (1989) · Reviews of Modern Physics · doi:10.1103/revmodphys.61.605 · Cited by 2,924
Thermoelectric figure of merit of a one-dimensional conductor
Hicks, L. D., & Dresselhaus, M. S. (1993) · Physical Review B · doi:10.1103/physrevb.47.16631 · Cited by 2,606
Quantum Dot Superlattice Thermoelectric Materials and Devices
Harman, T. C., Taylor, P. J., Walsh, M. P., & LaForge, B. E. (2002) · Science · doi:10.1126/science.1072886 · Cited by 2,495
Materials for thermoelectric energy conversion
Wood, C. (1988) · Reports on Progress in Physics · doi:10.1088/0034-4885/51/4/001 · Cited by 1,121
CsBi 4 Te 6 : A High-Performance Thermoelectric Material for Low-Temperature Applications
Chung, D.-Y., Hogan, T., Brazis, P., Rocci-Lane, M., Kannewurf, C., Bastea, M., Uher, C., & Kanatzidis, M. G. (2000) · Science · doi:10.1126/science.287.5455.1024 · Cited by 900
Self-citationEstablishment and Maintenance of a Heterochromatin Domain
Hall, I. M., Shankaranarayana, G. D., Noma, K.-I., Ayoub, N., Cohen, A., & Grewal, S. I. S. (2002) · Science · doi:10.1126/science.1076466 · Cited by 895
Kim, W., Zide, J., Gossard, A., Klenov, D., Stemmer, S., Shakouri, A., & Majumdar, A. (2006) · Physical Review Letters · doi:10.1103/physrevlett.96.045901 · Cited by 864
Cited by
New and Old Concepts in Thermoelectric Materials
Sootsman, J. R., Chung, D. Y., & Kanatzidis, M. G. (2009) · Angewandte Chemie International Edition · doi:10.1002/anie.200900598 · Cited by 2,488
Self-citationRationally Designing High-Performance Bulk Thermoelectric Materials
Tan, G., Zhao, L.-D., & Kanatzidis, M. G. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00255 · Cited by 2,355
Self-citationBulk nanostructured thermoelectric materials: current research and future prospects
Minnich, A. J., Dresselhaus, M. S., Ren, Z. F., & Chen, G. (2009) · Energy & Environmental Science · doi:10.1039/b822664b · Cited by 2,005
Nanostructured Thermoelectrics: Big Efficiency Gains from Small Features
Vineis, C. J., Shakouri, A., Majumdar, A., & Kanatzidis, M. G. (2010) · Advanced Materials · doi:10.1002/adma.201000839 · Cited by 1,430
Self-citationNanostructured Thermoelectrics: The New Paradigm?
Kanatzidis, M. G. (2010) · Chemistry of Materials · doi:10.1021/cm902195j · Cited by 1,153
Self-citationStrained endotaxial nanostructures with high thermoelectric figure of merit
Biswas, K., He, J., Zhang, Q., Wang, G., Uher, C., Dravid, V. P., & Kanatzidis, M. G. (2011) · Nature Chemistry · doi:10.1038/nchem.955 · Cited by 1,034
Self-citationResonant levels in bulk thermoelectric semiconductors
Heremans, J. P., Wiendlocha, B., & Chamoire, A. M. (2012) · Energy Environ. Sci. · doi:10.1039/c1ee02612g · Cited by 965
Recent advances in thermoelectric materials
Gayner, C., & Kar, K. K. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2016.07.002 · Cited by 918
Enhancement of Thermoelectric Figure‐of‐Merit by a Bulk Nanostructuring Approach
Lan, Y., Minnich, A. J., Chen, G., & Ren, Z. (2010) · Advanced Functional Materials · doi:10.1002/adfm.200901512 · Cited by 903
Nanostructured thermoelectric materials: Current research and future challenge
Chen, Z.-G., Han, G., Yang, L., Cheng, L., & Zou, J. (2012) · Progress in Natural Science: Materials International · doi:10.1016/j.pnsc.2012.11.011 · Cited by 825
Thermosensitive crystallization–boosted liquid thermocells for low-grade heat harvesting
Yu, B., Duan, J., Cong, H., Xie, W., Liu, R., Zhuang, X., Wang, H., Qi, B., Xu, M., Wang, Z. L., et al. (2020) · Science · doi:10.1126/science.abd6749 · Cited by 570
Nanostructured thermoelectrics
Pichanusakorn, P., & Bandaru, P. (2010) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2009.10.001 · Cited by 554
Tan, G., Shi, F., Hao, S., Chi, H., Zhao, L.-D., Uher, C., Wolverton, C., Dravid, V. P., & Kanatzidis, M. G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b00837 · Cited by 502
Self-citationRecent advances in high-performance bulk thermoelectric materials
Shi, X., Chen, L., & Uher, C. (2016) · International Materials Reviews · doi:10.1080/09506608.2016.1183075 · Cited by 494
Self-citationHigh performance bulk thermoelectrics via a panoscopic approach
He, J., Kanatzidis, M. G., & Dravid, V. P. (2013) · Materials Today · doi:10.1016/j.mattod.2013.05.004 · Cited by 487
Self-citationDefect engineering in thermoelectric materials: what have we learned?
Zheng, Y., Slade, T. J., Hu, L., Tan, X. Y., Luo, Y., Luo, Z.-Z., Xu, J., Yan, Q., & Kanatzidis, M. G. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00347j · Cited by 482
Self-citationReevaluation of PbTe1−xIx as high performance n-type thermoelectric material
LaLonde, A. D., Pei, Y., & Snyder, G. J. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01314a · Cited by 416
In Situ Kinetic Observations on Crystal Nucleation and Growth
Li, J., & Deepak, F. L. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c01067 · Cited by 386
A review on nanostructures of high-temperature thermoelectric materials for waste heat recovery
Fitriani, Ovik, R., Long, B. D., Barma, M. C., Riaz, M., Sabri, M. F. M., Said, S. M., & Saidur, R. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.06.035 · Cited by 385
Chalcopyrite CuGaTe2: A High‐Efficiency Bulk Thermoelectric Material
Plirdpring, T., Kurosaki, K., Kosuga, A., Day, T., Firdosy, S., Ravi, V., Snyder, G. J., Harnwunggmoung, A., Sugahara, T., Ohishi, Y., et al. (2012) · Advanced Materials · doi:10.1002/adma.201200732 · Cited by 379
Girard, S. N., He, J., Zhou, X., Shoemaker, D., Jaworski, C. M., Uher, C., Dravid, V. P., Heremans, J. P., & Kanatzidis, M. G. (2011) · Journal of the American Chemical Society · doi:10.1021/ja206380h · Cited by 349
Self-citationHe, J., Girard, S. N., Kanatzidis, M. G., & Dravid, V. P. (2010) · Advanced Functional Materials · doi:10.1002/adfm.200901905 · Cited by 333
Self-citationThermodynamic properties of PbTe, PbSe, and PbS: First-principles study
Zhang, Y., Ke, X., Chen, C., Yang, J., & Kent, P. R. C. (2009) · Physical Review B · doi:10.1103/physrevb.80.024304 · Cited by 322
Cho, C., Wallace, K. L., Tzeng, P., Hsu, J., Yu, C., & Grunlan, J. C. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502168 · Cited by 286
Makongo, J. P. A., Misra, D. K., Zhou, X., Pant, A., Shabetai, M. R., Su, X., Uher, C., Stokes, K. L., & Poudeu, P. F. P. (2011) · Journal of the American Chemical Society · doi:10.1021/ja206491j · Cited by 278
Self-citation
Metadata
- Authors
- Androulakis, J., Lin, C.-H., Kong, H.-J., Uher, C., Wu, C.-I., Hogan, T., Cook, B. A., Caillat, T., Paraskevopoulos, K. M., & Kanatzidis, M. G.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2007-07-13
- Volume
- 129
- Issue
- 31
- Pages
- 9780-9788
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2058586652
- Cited by
- 441
- References
- 18
- FWCI
- 12.98
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.