The DOI matches its Crossref record; 60 of the 60 references it cites were found in a registry or an index.
Nonhumidified Intermediate Temperature Fuel Cells Using Protic Ionic Liquids
Abstract
In this paper, the characterization of a protic ionic liquid, diethylmethylammonium trifluoromethanesulfonate ([dema][TfO]), as a proton conductor for a fuel cell and the fabrication of a membrane-type fuel cell system using [dema][TfO] under nonhumidified conditions at intermediate temperatures are described in detail. In terms of physicochemical and electrochemical properties, [dema][TfO] exhibits high activity for fuel cell electrode reactions (i.e., the hydrogen oxidation reaction (HOR) and oxygen reduction reaction (ORR)) at a Pt electrode, and the open circuit voltage (OCV) of a liquid fuel cell is 1.03 V at 150 degrees C, as has reported in ref 27. However, diethylmethylammonium bis(trifluoromethane sulfonyl)amide ([dema][NTf(2)]) has relatively low HOR and ORR activity, and thus, the OCV is ca. 0.7 V, although [dema][NTf(2)] and [dema][TfO] have an identical cation ([dema]) and similar thermal and bulk-transport properties. Proton conduction occurs mainly via the vehicle mechanism in [dema][TfO] and the proton transference number (t(+)) is 0.5-0.6. This relatively low t(+) appears to be more disadvantageous for a proton conductor than for other electrolytes such as hydrated sulfonated polymer electrolyte membranes (t(+) = 1.0). However, fast proton-exchange reactions occur between ammonium cations and amines in a model compound. This indicates that the proton-exchange mechanism contributes to the fuel cell system under operation, where deprotonated amines are continuously generated by the cathodic reaction, and that polarization of the cell is avoided. Six-membered sulfonated polyimides in the diethylmethylammonium form exhibit excellent compatibility with [dema][TfO]. The composite membranes can be obtained up to a [dema][TfO] content of 80 wt % and exhibit good thermal stability, high ionic conductivity, and mechanical strength and gas permeation comparable to those of hydrated Nafion. H(2)/O(2) fuel cells prepared using the composite membranes can successfully operate at temperatures from 30 to 140 degrees C under nonhumidified conditions, and a current density of 250 mA cm(-2) is achieved at 120 degrees C. The protic ionic liquid and its composite membrane are a possible candidate for an electrolyte of a H(2)/O(2) fuel cell that operates under nonhumidified conditions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films
O'Regan, B., & Grätzel, M. (1991) · Nature · doi:10.1038/353737a0 · Cited by 28,599
Room-Temperature Ionic Liquids: Solvents for Synthesis and Catalysis. 2
Hallett, J. P., & Welton, T. (2011) · Chemical Reviews · doi:10.1021/cr1003248 · Cited by 12,578
Room-Temperature Ionic Liquids. Solvents for Synthesis and Catalysis
Welton, T. (1999) · Chemical Reviews · doi:10.1021/cr980032t · Cited by 11,852
Ionic Liquids—New “Solutions” for Transition Metal Catalysis
Wasserscheid, P., & Keim, W. (2000) · Angewandte Chemie · doi:10.1002/1521-3773(20001103)39:21<3772::aid-anie3772>3.0.co;2-5 · Cited by 5,720
Applications of ionic liquids in the chemical industry
Plechkova, N. V., & Seddon, K. R. (2008) · Chem. Soc. Rev. · doi:10.1039/b006677j · Cited by 5,686
(2002) · Wiley eBooks · doi:10.1002/3527600701 · Cited by 3,960
Alternative Polymer Systems for Proton Exchange Membranes (PEMs)
Hickner, M. A., Ghassemi, H., Kim, Y. S., Einsla, B. R., & McGrath, J. E. (2004) · Chemical Reviews · doi:10.1021/cr020711a · Cited by 2,834
Kreuer, K.-D., Paddison, S. J., Spohr, E., & Schuster, M. (2004) · Chemical Reviews · doi:10.1021/cr020715f · Cited by 2,187
Li, Q., He, R., Jensen, J. O., & Bjerrum, N. J. (2003) · Chemistry of Materials · doi:10.1021/cm0310519 · Cited by 1,689
Tokuda, H., Hayamizu, K., Ishii, K., Susan, M. A. B. H., & Watanabe, M. (2004) · The Journal of Physical Chemistry B · doi:10.1021/jp047480r · Cited by 1,337
Self-citation
Cited by
Structure and Nanostructure in Ionic Liquids
Hayes, R., Warr, G. G., & Atkin, R. (2015) · Chemical Reviews · doi:10.1021/cr500411q · Cited by 2,293
Energy applications of ionic liquids
MacFarlane, D. R., Tachikawa, N., Forsyth, M., Pringle, J. M., Howlett, P. C., Elliott, G. D., Davis, J. H., Watanabe, M., Simon, P., & Angell, C. A. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42099j · Cited by 1,745
Self-citationApplication of Ionic Liquids to Energy Storage and Conversion Materials and Devices
Watanabe, M., Thomas, M. L., Zhang, S., Ueno, K., Yasuda, T., & Dokko, K. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00504 · Cited by 1,667
Self-citationMaterials, technological status, and fundamentals of PEM fuel cells – A review
Wang, Y., Ruiz Diaz, D. F., Chen, K. S., Wang, Z., & Adroher, X. C. (2020) · Materials Today · doi:10.1016/j.mattod.2019.06.005 · Cited by 1,419
Ionogels, ionic liquid based hybrid materials
Le Bideau, J., Viau, L., & Vioux, A. (2011) · Chem. Soc. Rev. · doi:10.1039/c0cs00059k · Cited by 1,285
Gel Polymer Electrolytes for Electrochemical Energy Storage
Cheng, X., Pan, J., Zhao, Y., Liao, M., & Peng, H. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702184 · Cited by 1,020
Yoshida, K., Nakamura, M., Kazue, Y., Tachikawa, N., Tsuzuki, S., Seki, S., Dokko, K., & Watanabe, M. (2011) · Journal of the American Chemical Society · doi:10.1021/ja203983r · Cited by 828
Self-citationA Review of Ionic Liquids, Their Limits and Applications
Ghandi, K. (2014) · Green and Sustainable Chemistry · doi:10.4236/gsc.2014.41008 · Cited by 729
Zhang, S., Zhang, J., Zhang, Y., & Deng, Y. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00509 · Cited by 659
Ionic liquid polymer electrolytes
Ye, Y.-S., Rick, J., & Hwang, B.-J. (2013) · J. Mater. Chem. A · doi:10.1039/c2ta00126h · Cited by 517
Ionic liquids for energy, materials, and medicine
Smiglak, M., Pringle, J. M., Lu, X., Han, L., Zhang, S., Gao, H., MacFarlane, D. R., & Rogers, R. D. (2014) · Chem. Commun. · doi:10.1039/c4cc02021a · Cited by 509
Recent approaches to improve Nafion performance for fuel cell applications: A review
Karimi, M. B., Mohammadi, F., & Hooshyari, K. (2019) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2019.09.096 · Cited by 450
Ding, Y., Zhang, J., Chang, L., Zhang, X., Liu, H., & Jiang, L. (2017) · Advanced Materials · doi:10.1002/adma.201704253 · Cited by 436
Advances in the high performance polymer electrolyte membranes for fuel cells
Zhang, H., & Shen, P. K. (2012) · Chemical Society Reviews · doi:10.1039/c2cs15269j · Cited by 400
Bet-moushoul, E., Mansourpanah, Y., Farhadi, K., & Tabatabaei, M. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.06.124 · Cited by 385
Ionic liquids confined in porous matrices: Physicochemical properties and applications
Singh, M. P., Singh, R. K., & Chandra, S. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2014.03.001 · Cited by 318
Energy Applications of Ionic Liquids: Recent Developments and Future Prospects
Zhou, T., Gui, C., Sun, L., Hu, Y., Lyu, H., Wang, Z., Song, Z., & Yu, G. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00391 · Cited by 305
Progress in the use of ionic liquids as electrolyte membranes in fuel cells
Díaz, M., Ortiz, A., & Ortiz, I. (2014) · Journal of Membrane Science · doi:10.1016/j.memsci.2014.06.033 · Cited by 283
Yang, J., Li, Q., Jensen, J. O., Pan, C., Cleemann, L. N., Bjerrum, N. J., & He, R. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.01.038 · Cited by 123
Metadata
- Authors
- Lee, S.-Y., Ogawa, A., Kanno, M., Nakamoto, H., Yasuda, T., & Watanabe, M.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-06-28
- Volume
- 132
- Issue
- 28
- Pages
- 9764-9773
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2022640301
- Cited by
- 465
- References
- 60
- FWCI
- 27.91
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.