The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Multiple-Filled Skutterudites: High Thermoelectric Figure of Merit through Separately Optimizing Electrical and Thermal Transports
Abstract
Skutterudites CoSb(3) with multiple cofillers Ba, La, and Yb were synthesized and very high thermoelectric figure of merit ZT = 1.7 at 850 K was realized. X-ray diffraction of the densified multiple-filled bulk samples reveals all samples are phase pure. High-resolution scanning transmission electron microscopy (STEM) and energy dispersive X-ray spectroscopy (EDS) analysis confirm that multiple guest fillers occupy the nanoscale-cages in the skutterudites. The fillers are further shown to be uniformly distributed and the Co-Sb skutterudite framework is virtually unperturbed from atomic scale to a few micrometers. Our results firmly show that high power factors can be realized by adjusting the total filling fraction of fillers with different charge states to reach the optimum carrier density, at the same time, lattice thermal conductivity can also be significantly reduced, to values near the glass limit of these materials, through combining filler species of different rattling frequencies to achieve broad-frequency phonon scattering. Therefore, partially filled skutterudites with multiple fillers of different chemical nature render unique structural characteristics for optimizing electrical and thermal transports in a relatively independent way, leading to continually enhanced ZT values from single- to double-, and finally to multiple-filled skutterudites. The idea of combining multiple fillers with different charge states and rattling frequencies for performance optimization is also expected to be valid for other caged TE compounds.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Shannon, R. D. (1976) · Acta Crystallographica Section A · doi:10.1107/s0567739476001551 · Cited by 66,145
Complex thermoelectric materials
Snyder, G. J., & Toberer, E. S. (2008) · Nature Materials · doi:10.1038/nmat2090 · Cited by 11,455
BoltzTraP. A code for calculating band-structure dependent quantities
Madsen, G. K. H., & Singh, D. J. (2006) · Computer Physics Communications · doi:10.1016/j.cpc.2006.03.007 · Cited by 6,208
High-Thermoelectric Performance of Nanostructured Bismuth Antimony Telluride Bulk Alloys
Poudel, B., Hao, Q., Ma, Y., Lan, Y., Minnich, A., Yu, B., Yan, X., Wang, D., Muto, A., Vashaee, D., et al. (2008) · Science · doi:10.1126/science.1156446 · Cited by 5,606
Thin-film thermoelectric devices with high room-temperature figures of merit
Venkatasubramanian, R., Siivola, E., Colpitts, T., & O'Quinn, B. (2001) · Nature · doi:10.1038/35098012 · Cited by 5,205
Enhancement of Thermoelectric Efficiency in PbTe by Distortion of the Electronic Density of States
Heremans, J. P., Jovovic, V., Toberer, E. S., Saramat, A., Kurosaki, K., Charoenphakdee, A., Yamanaka, S., & Snyder, G. J. (2008) · Science · doi:10.1126/science.1159725 · Cited by 4,161
Cubic AgPb m SbTe 2+ m : Bulk Thermoelectric Materials with High Figure of Merit
Hsu, K. F., Loo, S., Guo, F., Chen, W., Dyck, J. S., Uher, C., Hogan, T., Polychroniadis, E. K., & Kanatzidis, M. G. (2004) · Science · doi:10.1126/science.1092963 · Cited by 2,927
Lower limit to the thermal conductivity of disordered crystals
Cahill, D. G., Watson, S. K., & Pohl, R. O. (1992) · Physical Review B · doi:10.1103/physrevb.46.6131 · Cited by 2,617
Quantum Dot Superlattice Thermoelectric Materials and Devices
Harman, T. C., Taylor, P. J., Walsh, M. P., & LaForge, B. E. (2002) · Science · doi:10.1126/science.1072886 · Cited by 2,495
Filled Skutterudite Antimonides: A New Class of Thermoelectric Materials
Sales, B. C., Mandrus, D., & Williams, R. K. (1996) · Science · doi:10.1126/science.272.5266.1325 · Cited by 2,073
Cited by
High-performance bulk thermoelectrics with all-scale hierarchical architectures
Biswas, K., He, J., Blum, I. D., Wu, C.-I., Hogan, T. P., Seidman, D. N., Dravid, V. P., & Kanatzidis, M. G. (2012) · Nature · doi:10.1038/nature11439 · Cited by 4,740
Advances in thermoelectric materials research: Looking back and moving forward
He, J., & Tritt, T. M. (2017) · Science · doi:10.1126/science.aak9997 · Cited by 2,767
Advanced Thermoelectric Design: From Materials and Structures to Devices
Shi, X.-L., Zou, J., & Chen, Z.-G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00026 · Cited by 2,524
Self-citationRationally Designing High-Performance Bulk Thermoelectric Materials
Tan, G., Zhao, L.-D., & Kanatzidis, M. G. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00255 · Cited by 2,355
Ultrahigh power factor and thermoelectric performance in hole-doped single-crystal SnSe
Zhao, L.-D., Tan, G., Hao, S., He, J., Pei, Y., Chi, H., Wang, H., Gong, S., Xu, H., Dravid, V. P., et al. (2016) · Science · doi:10.1126/science.aad3749 · Cited by 2,037
Self-citationCompromise and Synergy in High‐Efficiency Thermoelectric Materials
Zhu, T., Liu, Y., Fu, C., Heremans, J. P., Snyder, J. G., & Zhao, X. (2017) · Advanced Materials · doi:10.1002/adma.201605884 · Cited by 1,616
Perspectives on thermoelectrics: from fundamentals to device applications
Zebarjadi, M., Esfarjani, K., Dresselhaus, M. S., Ren, Z. F., & Chen, G. (2012) · Energy Environ. Sci. · doi:10.1039/c1ee02497c · Cited by 1,365
A review on thermoelectric renewable energy: Principle parameters that affect their performance
Hamid Elsheikh, M., Shnawah, D. A., Sabri, M. F. M., Said, S. B. M., Haji Hassan, M., Ali Bashir, M. B., & Mohamad, M. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.10.027 · Cited by 958
High Performance Thermoelectric Materials: Progress and Their Applications
Yang, L., Chen, Z., Dargusch, M. S., & Zou, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701797 · Cited by 958
High-performance thermoelectrics and challenges for practical devices
Yan, Q., & Kanatzidis, M. G. (2022) · Nature Materials · doi:10.1038/s41563-021-01109-w · Cited by 846
Nanostructured thermoelectric materials: Current research and future challenge
Chen, Z.-G., Han, G., Yang, L., Cheng, L., & Zou, J. (2012) · Progress in Natural Science: Materials International · doi:10.1016/j.pnsc.2012.11.011 · Cited by 825
Tang, Y., Gibbs, Z. M., Agapito, L. A., Li, G., Kim, H.-S., Nardelli, M. B., Curtarolo, S., & Snyder, G. J. (2015) · Nature Materials · doi:10.1038/nmat4430 · Cited by 772
BiCuSeO oxyselenides: new promising thermoelectric materials
Zhao, L.-D., He, J., Berardan, D., Lin, Y., Li, J.-F., Nan, C.-W., & Dragoe, N. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee00997e · Cited by 722
A review on the enhancement of figure of merit from bulk to nano-thermoelectric materials
Alam, H., & Ramakrishna, S. (2013) · Nano Energy · doi:10.1016/j.nanoen.2012.10.005 · Cited by 695
Enhanced atomic ordering leads to high thermoelectric performance in AgSbTe 2
Roychowdhury, S., Ghosh, T., Arora, R., Samanta, M., Xie, L., Singh, N. K., Soni, A., He, J., Waghmare, U. V., & Biswas, K. (2021) · Science · doi:10.1126/science.abb3517 · Cited by 649
Zhang, J., Song, L., Pedersen, S. H., Yin, H., Hung, L. T., & Iversen, B. B. (2017) · Nature Communications · doi:10.1038/ncomms13901 · Cited by 619
Recent progress of half-Heusler for moderate temperature thermoelectric applications
Chen, S., & Ren, Z. (2013) · Materials Today · doi:10.1016/j.mattod.2013.09.015 · Cited by 618
Thermoelectrics: From history, a window to the future
Beretta, D., Neophytou, N., Hodges, J. M., Kanatzidis, M. G., Narducci, D., Martin- Gonzalez, M., Beekman, M., Balke, B., Cerretti, G., Tremel, W., et al. (2019) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2018.09.001 · Cited by 606
SnSe: a remarkable new thermoelectric material
Zhao, L.-D., Chang, C., Tan, G., & Kanatzidis, M. G. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01755j · Cited by 573
Yang, J., Xi, L., Qiu, W., Wu, L., Shi, X., Chen, L., Yang, J., Zhang, W., Uher, C., & Singh, D. J. (2016) · npj Computational Materials · doi:10.1038/npjcompumats.2015.15 · Cited by 552
Self-citationRecent advances in high-performance bulk thermoelectric materials
Shi, X., Chen, L., & Uher, C. (2016) · International Materials Reviews · doi:10.1080/09506608.2016.1183075 · Cited by 494
Self-citationMehdizadeh Dehkordi, A., Zebarjadi, M., He, J., & Tritt, T. M. (2015) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2015.08.001 · Cited by 493
Defect engineering in thermoelectric materials: what have we learned?
Zheng, Y., Slade, T. J., Hu, L., Tan, X. Y., Luo, Y., Luo, Z.-Z., Xu, J., Yan, Q., & Kanatzidis, M. G. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00347j · Cited by 482
Ultrahigh Thermoelectric Performance by Electron and Phonon Critical Scattering in Cu2Se1‐xIx
Liu, H., Yuan, X., Lu, P., Shi, X., Xu, F., He, Y., Tang, Y., Bai, S., Zhang, W., Chen, L., et al. (2013) · Advanced Materials · doi:10.1002/adma.201302660 · Cited by 464
Self-citationTowards high-performance polymer-based thermoelectric materials
He, M., Qiu, F., & Lin, Z. (2013) · Energy & Environmental Science · doi:10.1039/c3ee24193a · Cited by 458
Broad temperature plateau for high ZTs in heavily doped p-type SnSe single crystals
Peng, K., Lu, X., Zhan, H., Hui, S., Tang, X., Wang, G., Dai, J., Uher, C., Wang, G., & Zhou, X. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03366g · Cited by 451
Charge and phonon transport in PbTe-based thermoelectric materials
Xiao, Y., & Zhao, L.-D. (2018) · npj Quantum Materials · doi:10.1038/s41535-018-0127-y · Cited by 425
LeBlanc, S. (2014) · Sustainable Materials and Technologies · doi:10.1016/j.susmat.2014.11.002 · Cited by 424
Eco‐Friendly SnTe Thermoelectric Materials: Progress and Future Challenges
Moshwan, R., Yang, L., Zou, J., & Chen, Z. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201703278 · Cited by 424
Carrier grain boundary scattering in thermoelectric materials
Hu, C., Xia, K., Fu, C., Zhao, X., & Zhu, T. (2022) · Energy & Environmental Science · doi:10.1039/d1ee03802h · Cited by 409
Extraordinary role of Hg in enhancing the thermoelectric performance of p-type SnTe
Tan, G., Shi, F., Doak, J. W., Sun, H., Zhao, L.-D., Wang, P., Uher, C., Wolverton, C., Dravid, V. P., & Kanatzidis, M. G. (2015) · Energy & Environmental Science · doi:10.1039/c4ee01463d · Cited by 401
Routes for high-performance thermoelectric materials
Zhou, X., Yan, Y., Lu, X., Zhu, H., Han, X., Chen, G., & Ren, Z. (2018) · Materials Today · doi:10.1016/j.mattod.2018.03.039 · Cited by 393
Chalcopyrite CuGaTe2: A High‐Efficiency Bulk Thermoelectric Material
Plirdpring, T., Kurosaki, K., Kosuga, A., Day, T., Firdosy, S., Ravi, V., Snyder, G. J., Harnwunggmoung, A., Sugahara, T., Ohishi, Y., et al. (2012) · Advanced Materials · doi:10.1002/adma.201200732 · Cited by 379
Studies on the Bi2Te3–Bi2Se3–Bi2S3system for mid-temperature thermoelectric energy conversion
Liu, W., Lukas, K. C., McEnaney, K., Lee, S., Zhang, Q., Opeil, C. P., Chen, G., & Ren, Z. (2013) · Energy Environ. Sci. · doi:10.1039/c2ee23549h · Cited by 310
Achieving high power factor and output power density in p-type half-Heuslers Nb 1-x Ti x FeSb
He, R., Kraemer, D., Mao, J., Zeng, L., Jie, Q., Lan, Y., Li, C., Shuai, J., Kim, H. S., Liu, Y., et al. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1617663113 · Cited by 300
Aswal, D. K., Basu, R., & Singh, A. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.01.065 · Cited by 294
Qiu, W., Xi, L., Wei, P., Ke, X., Yang, J., & Zhang, W. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1410349111 · Cited by 292
Self-citationNanoengineering thermoelectrics for 21st century: Energy harvesting and other trends in the field
Martín-González, M., Caballero-Calero, O., & Díaz-Chao, P. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.03.008 · Cited by 291
Recent Advances in Liquid‐Like Thermoelectric Materials
Zhao, K., Qiu, P., Shi, X., & Chen, L. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201903867 · Cited by 285
Self-citationLow Sound Velocity Contributing to the High Thermoelectric Performance of Ag8SnSe6
Li, W., Lin, S., Ge, B., Yang, J., Zhang, W., & Pei, Y. (2016) · Advanced Science · doi:10.1002/advs.201600196 · Cited by 284
Self-citationZhao, W., Liu, Z., Wei, P., Zhang, Q., Zhu, W., Su, X., Tang, X., Yang, J., Liu, Y., Shi, J., et al. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2016.182 · Cited by 283
Self-citationHu, L., Zhang, Y., Wu, H., Li, J., Li, Y., Mckenna, M., He, J., Liu, F., Pennycook, S. J., & Zeng, X. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201802116 · Cited by 266
Excessively Doped PbTe with Ge-Induced Nanostructures Enables High-Efficiency Thermoelectric Modules
Jood, P., Ohta, M., Yamamoto, A., & Kanatzidis, M. G. (2018) · Joule · doi:10.1016/j.joule.2018.04.025 · Cited by 263
Metadata
- Authors
- Shi, X., Yang, J., Salvador, J. R., Chi, M., Cho, J. Y., Wang, H., Bai, S., Yang, J., Zhang, W., & Chen, L.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-04-27
- Volume
- 133
- Issue
- 20
- Pages
- 7837-7846
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W1995997336
- Cited by
- 1,478
- References
- 23
- FWCI
- 37.65
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.