The DOI matches its Crossref record; 71 of the 71 references it cites were found in a registry or an index.
Metal−Organic Frameworks as Adsorbents for Hydrogen Purification and Precombustion Carbon Dioxide Capture
Open accessAbstract
Selected metal-organic frameworks exhibiting representative properties--high surface area, structural flexibility, or the presence of open metal cation sites--were tested for utility in the separation of CO(2) from H(2) via pressure swing adsorption. Single-component CO(2) and H(2) adsorption isotherms were measured at 313 K and pressures up to 40 bar for Zn(4)O(BTB)(2) (MOF-177, BTB(3-) = 1,3,5-benzenetribenzoate), Be(12)(OH)(12)(BTB)(4) (Be-BTB), Co(BDP) (BDP(2-) = 1,4-benzenedipyrazolate), H(3)[(Cu(4)Cl)(3)(BTTri)(8)] (Cu-BTTri, BTTri(3-) = 1,3,5-benzenetristriazolate), and Mg(2)(dobdc) (dobdc(4-) = 1,4-dioxido-2,5-benzenedicarboxylate). Ideal adsorbed solution theory was used to estimate realistic isotherms for the 80:20 and 60:40 H(2)/CO(2) gas mixtures relevant to H(2) purification and precombustion CO(2) capture, respectively. In the former case, the results afford CO(2)/H(2) selectivities between 2 and 860 and mixed-gas working capacities, assuming a 1 bar purge pressure, as high as 8.6 mol/kg and 7.4 mol/L. In particular, metal-organic frameworks with a high concentration of exposed metal cation sites, Mg(2)(dobdc) and Cu-BTTri, offer significant improvements over commonly used adsorbents, indicating the promise of such materials for applications in CO(2)/H(2) separations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Selective gas adsorption and separation in metal–organic frameworks
Li, J.-R., Kuppler, R. J., & Zhou, H.-C. (2009) · Chemical Society Reviews · doi:10.1039/b802426j · Cited by 8,932
Purification of Laboratory Chemicals
(2003) · Elsevier eBooks · doi:10.1016/b978-0-7506-7571-0.x5000-5 · Cited by 8,730
Eddaoudi, M., Kim, J., Rosi, N., Vodak, D., Wachter, J., O'Keeffe, M., & Yaghi, O. M. (2002) · Science · doi:10.1126/science.1067208 · Cited by 8,132
Ultrahigh Porosity in Metal-Organic Frameworks
Furukawa, H., Ko, N., Go, Y. B., Aratani, N., Choi, S. B., Choi, E., Yazaydin, A. Ö., Snurr, R. Q., O’Keeffe, M., Kim, J., et al. (2010) · Science · doi:10.1126/science.1192160 · Cited by 3,904
Thermodynamics of mixed‐gas adsorption
Myers, A. L., & Prausnitz, J. M. (1965) · AIChE Journal · doi:10.1002/aic.690110125 · Cited by 3,775
Millward, A. R., & Yaghi, O. M. (2005) · Journal of the American Chemical Society · doi:10.1021/ja0570032 · Cited by 2,876
A route to high surface area, porosity and inclusion of large molecules in crystals
Materials Design and Discovery Group, Chae, H. K., Siberio-Pérez, D. Y., Kim, J., Go, Y., Eddaoudi, M., Matzger, A. J., O'Keeffe, M., & Yaghi, O. M. (2004) · Nature · doi:10.1038/nature02311 · Cited by 2,816
Caskey, S. R., Wong-Foy, A. G., & Matzger, A. J. (2008) · Journal of the American Chemical Society · doi:10.1021/ja8036096 · Cited by 1,815
Thermophysical Properties of Fluid Systems
Lemmon, E. W. (1998) · Medical Entomology and Zoology · Cited by 1,700
Britt, D., Furukawa, H., Wang, B., Glover, T. G., & Yaghi, O. M. (2009) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0909718106 · Cited by 1,211
Cited by
Metal–Organic Frameworks for Separations
Li, J.-R., Sculley, J., & Zhou, H.-C. (2012) · Chemical Reviews · doi:10.1021/cr200190s · Cited by 6,323
Carbon capture and conversion using metal–organic frameworks and MOF-based materials
Ding, M., Flaig, R. W., Jiang, H.-L., & Yaghi, O. M. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00829a · Cited by 2,616
Porous materials with optimal adsorption thermodynamics and kinetics for CO2 separation
Nugent, P., Belmabkhout, Y., Burd, S. D., Cairns, A. J., Luebke, R., Forrest, K., Pham, T., Ma, S., Space, B., Wojtas, L., et al. (2013) · Nature · doi:10.1038/nature11893 · Cited by 2,387
The chemistry of metal–organic frameworks for CO2 capture, regeneration and conversion
Trickett, C. A., Helal, A., Al-Maythalony, B. A., Yamani, Z. H., Cordova, K. E., & Yaghi, O. M. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.45 · Cited by 1,524
Evaluating metal–organic frameworks for natural gas storage
Mason, J. A., Veenstra, M., & Long, J. R. (2014) · Chem. Sci. · doi:10.1039/c3sc52633j · Cited by 1,239
Self-citationCO2 Capture and Separations Using MOFs: Computational and Experimental Studies
Yu, J., Xie, L.-H., Li, J.-R., Ma, Y., Seminario, J. M., & Balbuena, P. B. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00626 · Cited by 1,047
Kökçam-Demir, Ü., Goldman, A., Esrafili, L., Gharib, M., Morsali, A., Weingart, O., & Janiak, C. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00609e · Cited by 895
Review of recent advances in carbon dioxide separation and capture
Kenarsari, S. D., Yang, D., Jiang, G., Zhang, S., Wang, J., Russell, A. G., Wei, Q., & Fan, M. (2013) · RSC Advances · doi:10.1039/c3ra43965h · Cited by 784
Evaluation of cation-exchanged zeolite adsorbents for post-combustion carbon dioxide capture
Bae, T.-H., Hudson, M. R., Mason, J. A., Queen, W. L., Dutton, J. J., Sumida, K., Micklash, K. J., Kaye, S. S., Brown, C. M., & Long, J. R. (2013) · Energy Environ. Sci. · doi:10.1039/c2ee23337a · Cited by 437
Self-citationDiscriminative Separation of Gases by a “Molecular Trapdoor” Mechanism in Chabazite Zeolites
Shang, J., Li, G., Singh, R., Gu, Q., Nairn, K. M., Bastow, T. J., Medhekar, N., Doherty, C. M., Hill, A. J., Liu, J. Z., et al. (2012) · Journal of the American Chemical Society · doi:10.1021/ja309274y · Cited by 436
Porous Organic Polymers for Post‐Combustion Carbon Capture
Zou, L., Sun, Y., Che, S., Yang, X., Wang, X., Bosch, M., Wang, Q., Li, H., Smith, M., Yuan, S., et al. (2017) · Advanced Materials · doi:10.1002/adma.201700229 · Cited by 432
Review of pre-combustion capture and ionic liquid in carbon capture and storage
Theo, W. L., Lim, J. S., Hashim, H., Mustaffa, A. A., & Ho, W. S. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.09.103 · Cited by 396
Trends in Solid Adsorbent Materials Development for CO 2 Capture
Pardakhti, M., Jafari, T., Tobin, Z., Dutta, B., Moharreri, E., Shemshaki, N. S., Suib, S., & Srivastava, R. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b08487 · Cited by 357
Ab initio carbon capture in open-site metal–organic frameworks
Dzubak, A. L., Lin, L.-C., Kim, J., Swisher, J. A., Poloni, R., Maximoff, S. N., Smit, B., & Gagliardi, L. (2012) · Nature Chemistry · doi:10.1038/nchem.1432 · Cited by 351
Self-citationChung, Y. G., Gómez-Gualdrón, D. A., Li, P., Leperi, K. T., Deria, P., Zhang, H., Vermeulen, N. A., Stoddart, J. F., You, F., Hupp, J. T., et al. (2016) · Science Advances · doi:10.1126/sciadv.1600909 · Cited by 321
Microwave synthesis and characterization of MOF-74 (M=Ni, Mg) for gas separation
Wu, X., Bao, Z., Yuan, B., Wang, J., Sun, Y., Luo, H., & Deng, S. (2013) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2013.06.023 · Cited by 314
Quantum-Chemical Characterization of the Properties and Reactivities of Metal–Organic Frameworks
Odoh, S. O., Cramer, C. J., Truhlar, D. G., & Gagliardi, L. (2015) · Chemical Reviews · doi:10.1021/cr500551h · Cited by 306
2D Transition Metal Carbides (MXenes) for Carbon Capture
Persson, I., Halim, J., Lind, H., Hansen, T. W., Wagner, J. B., Näslund, L., Darakchieva, V., Palisaitis, J., Rosen, J., & Persson, P. O. Å. (2019) · Advanced Materials · doi:10.1002/adma.201805472 · Cited by 282
Felix Sahayaraj, A., Joy Prabu, H., Maniraj, J., Kannan, M., Bharathi, M., Diwahar, P., & Salamon, J. (2023) · Journal of Inorganic and Organometallic Polymers and Materials · doi:10.1007/s10904-023-02657-1 · Cited by 267
Carbon Capture Technologies: A Review on Technology Readiness Level
Hekmatmehr, H., Esmaeili, A., Pourmahdi, M., Atashrouz, S., Abedi, A., Ali Abuswer, M., Nedeljkovic, D., Latifi, M., Farag, S., & Mohaddespour, A. (2024) · Fuel · doi:10.1016/j.fuel.2024.130898 · Cited by 189
Zhu, X., Li, S., Shi, Y., & Cai, N. (2019) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2019.100784 · Cited by 129
Peng, X., & Cao, D. (2013) · AIChE Journal · doi:10.1002/aic.14046 · Cited by 92
Song, C., Hu, J., Ling, Y., Feng, Y., Krishna, R., Chen, D.-L., & He, Y. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta05481h · Cited by 91
Self-citationWang, X., Yan, N., Xie, M., Liu, P., Bai, P., Su, H., Wang, B., Wang, Y., Li, L., Cheng, T., et al. (2021) · Chemical Science · doi:10.1039/d1sc00619c · Cited by 90
Metal organic frameworks for hydrogen purification
Mao, D., Griffin, J. M., Dawson, R., Fairhurst, A., & Bimbo, N. (2021) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2020.12.181 · Cited by 49
Bahamon, D., Ogungbenro, A. E., Khaleel, M., Abu-Zahra, M. R. M., & Vega, L. F. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b05542 · Cited by 31
Characteristics of oat hull based biosorbent for natural gas dehydration in a PSA process
Ghanbari, S., & Niu, C. H. (2019) · Journal of Natural Gas Science and Engineering · doi:10.1016/j.jngse.2018.11.014 · Cited by 29
Characterization of a high-performance biosorbent for natural gas dehydration
Ghanbari, S., & Niu, C. H. (2018) · Energy & Fuels · doi:10.1021/acs.energyfuels.8b02665 · Cited by 17
Metadata
- Authors
- Herm, Z. R., Swisher, J. A., Smit, B., Krishna, R., & Long, J. R.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-03-25
- Volume
- 133
- Issue
- 15
- Pages
- 5664-5667
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2124724237
- Cited by
- 521
- References
- 71
- FWCI
- 33.18
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.