The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Highly Selective Carbon Dioxide Uptake by [Cu(bpy-n)2(SiF6)] (bpy-1 = 4,4′-Bipyridine; bpy-2 = 1,2-Bis(4-pyridyl)ethene)
Abstract
A previously known class of porous coordination polymer (PCP) of formula [Cu(bpy-n)(2)(SiF(6))] (bpy-1 = 4,4'-bipyridine; bpy-2 = 1,2-bis(4-pyridyl)ethene) has been studied to assess its selectivity toward CO(2), CH(4), N(2), and H(2)O. Gas sorption measurements reveal that [Cu(bpy-1)(2)(SiF(6))] exhibits the highest uptake for CO(2) yet seen at 298 K and 1 atm by a PCP that does not contain open metal sites. Significantly, [Cu(bpy-1)(2)(SiF(6))] does not exhibit particularly high uptake under the same conditions for CH(4), N(2), and, H(2)O, presumably because of its lack of open metal sites. Consequently, at 298 K and 1 atm [Cu(bpy-1)(2)(SiF(6))] exhibits a relative uptake of CO(2) over CH(4) of ca. 10.5:1, the highest value experimentally observed in a compound without open metal sites. [Cu(bpy-2)(2)(SiF(6))] exhibits larger pores and surface area than [Cu(bpy-1)(2)(SiF(6))] but retains a high CO(2)/CH(4) relative uptake of ca. 8:1.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An Amine-Functionalized MIL-53 Metal−Organic Framework with Large Separation Power for CO 2 and CH 4
Couck, S., Denayer, J. F. M., Baron, G. V., Rémy, T., Gascon, J., & Kapteijn, F. (2009) · Journal of the American Chemical Society · doi:10.1021/ja900555r · Cited by 988
Cited by
Water Stability and Adsorption in Metal–Organic Frameworks
Burtch, N. C., Jasuja, H., & Walton, K. S. (2014) · Chemical Reviews · doi:10.1021/cr5002589 · Cited by 2,730
Porous materials with optimal adsorption thermodynamics and kinetics for CO2 separation
Nugent, P., Belmabkhout, Y., Burd, S. D., Cairns, A. J., Luebke, R., Forrest, K., Pham, T., Ma, S., Space, B., Wojtas, L., et al. (2013) · Nature · doi:10.1038/nature11893 · Cited by 2,387
Self-citationThe chemistry of metal–organic frameworks for CO2 capture, regeneration and conversion
Trickett, C. A., Helal, A., Al-Maythalony, B. A., Yamani, Z. H., Cordova, K. E., & Yaghi, O. M. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.45 · Cited by 1,524
Pore chemistry and size control in hybrid porous materials for acetylene capture from ethylene
Cui, X., Chen, K., Xing, H., Yang, Q., Krishna, R., Bao, Z., Wu, H., Zhou, W., Dong, X., Han, Y., et al. (2016) · Science · doi:10.1126/science.aaf2458 · Cited by 1,449
Self-citationCO2 Capture and Separations Using MOFs: Computational and Experimental Studies
Yu, J., Xie, L.-H., Li, J.-R., Ma, Y., Seminario, J. M., & Balbuena, P. B. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00626 · Cited by 1,047
Porous metal-organic frameworks for gas storage and separation: Status and challenges
Li, H., Li, L., Lin, R.-B., Zhou, W., Zhang, Z., Xiang, S., & Chen, B. (2019) · EnergyChem · doi:10.1016/j.enchem.2019.100006 · Cited by 891
Linker functionalized metal-organic frameworks
Ali Akbar Razavi, S., & Morsali, A. (2019) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2019.213023 · Cited by 341
Saha, D., Grappe, H. A., Chakraborty, A., & Orkoulas, G. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00745 · Cited by 316
Metadata
- Authors
- Burd, S. D., Ma, S., Perman, J. A., Sikora, B. J., Snurr, R. Q., Thallapally, P. K., Tian, J., Wojtas, L., & Zaworotko, M. J.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-02-15
- Volume
- 134
- Issue
- 8
- Pages
- 3663-3666
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2092379373
- Cited by
- 322
- References
- 1
- FWCI
- 20.80
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
