The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Thermoelectrics with Earth Abundant Elements: High Performance p-type PbS Nanostructured with SrS and CaS
Abstract
We report high thermoelectric performance in nanostructured p-type PbS, a material consisting of highly earth abundant and inexpensive elements. The high level of Na doping switched intrinsic n-type PbS to p-type and substantially raised the power factor maximum for pure PbS to ~9.0 μW cm(-1) K(-2) at >723 K using 2.5 at. % Na as the hole dopant. Contrary to that of PbTe, no enhancement in the Hall coefficient occurs at high temperature for heavily doped p-type PbS, indicating a single band model and no heavy hole band. We also report that the lattice thermal conductivity of PbS can be greatly reduced by adding SrS or CaS, which form a combination of a nanostructured/solid solution material as determined by transmission electron microscopy. We find that both nanoscale precipitates and point defects play an important role in reducing the lattice thermal conductivity, but the contribution from nanoscale precipitates of SrS is greater than that of CaS, whereas the contribution from point defects in the case of CaS is greater than that of SrS. Theoretical calculations of the lattice thermal conductivity based on the modified Callaway model reveal that both nanostructures and point defects (solid solution) effectively scatter phonons in this system. The lattice thermal conductivity at 723 K can be reduced by ~50% by introducing up to 4.0 at. % of either SrS or CaS. As a consequence, ZT values as high as 1.22 and 1.12 at 923 K can be achieved for nominal Pb(0.975)Na(0.025)S with 3.0 at. % SrS and CaS, respectively. No deterioration was observed after a 15 d annealing treatment of the samples, indicating the excellent thermal stability for these high performance thermoelectrics. The promising thermoelectric properties of nanostructured PbS point to a robust low cost alternative to other high performance thermoelectric materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Complex thermoelectric materials
Snyder, G. J., & Toberer, E. S. (2008) · Nature Materials · doi:10.1038/nmat2090 · Cited by 11,455
High-Thermoelectric Performance of Nanostructured Bismuth Antimony Telluride Bulk Alloys
Poudel, B., Hao, Q., Ma, Y., Lan, Y., Minnich, A., Yu, B., Yan, X., Wang, D., Muto, A., Vashaee, D., et al. (2008) · Science · doi:10.1126/science.1156446 · Cited by 5,606
Convergence of electronic bands for high performance bulk thermoelectrics
Pei, Y., Shi, X., LaLonde, A., Wang, H., Chen, L., & Snyder, G. J. (2011) · Nature · doi:10.1038/nature09996 · Cited by 4,263
Enhancement of Thermoelectric Efficiency in PbTe by Distortion of the Electronic Density of States
Heremans, J. P., Jovovic, V., Toberer, E. S., Saramat, A., Kurosaki, K., Charoenphakdee, A., Yamanaka, S., & Snyder, G. J. (2008) · Science · doi:10.1126/science.1159725 · Cited by 4,161
New Directions for Low‐Dimensional Thermoelectric Materials
Dresselhaus, M. S., Chen, G., Tang, M. Y., Yang, R. G., Lee, H., Wang, D. Z., Ren, Z. F., Fleurial, J. ‐., & Gogna, P. (2007) · Advanced Materials · doi:10.1002/adma.200600527 · Cited by 4,033
Cubic AgPb m SbTe 2+ m : Bulk Thermoelectric Materials with High Figure of Merit
Hsu, K. F., Loo, S., Guo, F., Chen, W., Dyck, J. S., Uher, C., Hogan, T., Polychroniadis, E. K., & Kanatzidis, M. G. (2004) · Science · doi:10.1126/science.1092963 · Cited by 2,927
Self-citationQuantitative measurement of displacement and strain fields from HREM micrographs
Hÿtch, M. J., Snoeck, E., & Kilaas, R. (1998) · Ultramicroscopy · doi:10.1016/s0304-3991(98)00035-7 · Cited by 2,752
New and Old Concepts in Thermoelectric Materials
Sootsman, J. R., Chung, D. Y., & Kanatzidis, M. G. (2009) · Angewandte Chemie International Edition · doi:10.1002/anie.200900598 · Cited by 2,488
Self-citationIntroduction to Thermoelectricity
Goldsmid, H. J. (2010) · Springer Series in Materials Science · doi:10.1007/978-3-642-00716-3 · Cited by 1,505
Nanostructured Thermoelectrics: Big Efficiency Gains from Small Features
Vineis, C. J., Shakouri, A., Majumdar, A., & Kanatzidis, M. G. (2010) · Advanced Materials · doi:10.1002/adma.201000839 · Cited by 1,430
Self-citation
Cited by
Rationally Designing High-Performance Bulk Thermoelectric Materials
Tan, G., Zhao, L.-D., & Kanatzidis, M. G. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00255 · Cited by 2,355
Self-citationUltrahigh power factor and thermoelectric performance in hole-doped single-crystal SnSe
Zhao, L.-D., Tan, G., Hao, S., He, J., Pei, Y., Chi, H., Wang, H., Gong, S., Xu, H., Dravid, V. P., et al. (2016) · Science · doi:10.1126/science.aad3749 · Cited by 2,037
Self-citationThe panoscopic approach to high performance thermoelectrics
Zhao, L.-D., Dravid, V. P., & Kanatzidis, M. G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee43099e · Cited by 997
Self-citationHigh thermoelectric performance by resonant dopant indium in nanostructured SnTe
Zhang, Q., Liao, B., Lan, Y., Lukas, K., Liu, W., Esfarjani, K., Opeil, C., Broido, D., Chen, G., & Ren, Z. (2013) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1305735110 · Cited by 789
Zhao, L. D., Wu, H. J., Hao, S. Q., Wu, C. I., Zhou, X. Y., Biswas, K., He, J. Q., Hogan, T. P., Uher, C., Wolverton, C., et al. (2013) · Energy & Environmental Science · doi:10.1039/c3ee42187b · Cited by 767
Self-citationBiCuSeO oxyselenides: new promising thermoelectric materials
Zhao, L.-D., He, J., Berardan, D., Lin, Y., Li, J.-F., Nan, C.-W., & Dragoe, N. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee00997e · Cited by 722
Self-citationTan, G., Zhao, L.-D., Shi, F., Doak, J. W., Lo, S.-H., Sun, H., Wolverton, C., Dravid, V. P., Uher, C., & Kanatzidis, M. G. (2014) · Journal of the American Chemical Society · doi:10.1021/ja500860m · Cited by 706
Self-citationHigh thermoelectric performance in low-cost SnS 0.91 Se 0.09 crystals
He, W., Wang, D., Wu, H., Xiao, Y., Zhang, Y., He, D., Feng, Y., Hao, Y.-J., Dong, J.-F., Chetty, R., et al. (2019) · Science · doi:10.1126/science.aax5123 · Cited by 610
Self-citationThermoelectrics: From history, a window to the future
Beretta, D., Neophytou, N., Hodges, J. M., Kanatzidis, M. G., Narducci, D., Martin- Gonzalez, M., Beekman, M., Balke, B., Cerretti, G., Tremel, W., et al. (2019) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2018.09.001 · Cited by 606
Self-citationMao, J., Liu, Z., Zhou, J., Zhu, H., Zhang, Q., Chen, G., & Ren, Z. (2018) · Advances in Physics · doi:10.1080/00018732.2018.1551715 · Cited by 592
Current progress and future challenges in thermoelectric power generation: From materials to devices
Liu, W., Jie, Q., Kim, H. S., & Ren, Z. (2015) · Acta Materialia · doi:10.1016/j.actamat.2014.12.042 · Cited by 581
SnSe: a remarkable new thermoelectric material
Zhao, L.-D., Chang, C., Tan, G., & Kanatzidis, M. G. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01755j · Cited by 573
Self-citationBroad temperature plateau for thermoelectric figure of merit ZT>2 in phase-separated PbTe0.7S0.3
Wu, H. J., Zhao, L.-D., Zheng, F. S., Wu, D., Pei, Y. L., Tong, X., Kanatzidis, M. G., & He, J. Q. (2014) · Nature Communications · doi:10.1038/ncomms5515 · Cited by 557
Self-citationInverse design in search of materials with target functionalities
Zunger, A. (2018) · Nature Reviews Chemistry · doi:10.1038/s41570-018-0121 · Cited by 513
Defect engineering in thermoelectric materials: what have we learned?
Zheng, Y., Slade, T. J., Hu, L., Tan, X. Y., Luo, Y., Luo, Z.-Z., Xu, J., Yan, Q., & Kanatzidis, M. G. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00347j · Cited by 482
Self-citationCharge and phonon transport in PbTe-based thermoelectric materials
Xiao, Y., & Zhao, L.-D. (2018) · npj Quantum Materials · doi:10.1038/s41535-018-0127-y · Cited by 425
Self-citationZheng, Z., Su, X., Deng, R., Stoumpos, C., Xie, H., Liu, W., Yan, Y., Hao, S., Uher, C., Wolverton, C., et al. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.7b13611 · Cited by 415
Self-citationExtraordinary role of Hg in enhancing the thermoelectric performance of p-type SnTe
Tan, G., Shi, F., Doak, J. W., Sun, H., Zhao, L.-D., Wang, P., Uher, C., Wolverton, C., Dravid, V. P., & Kanatzidis, M. G. (2015) · Energy & Environmental Science · doi:10.1039/c4ee01463d · Cited by 401
Self-citationAnharmoncity and low thermal conductivity in thermoelectrics
Chang, C., & Zhao, L.-D. (2018) · Materials Today Physics · doi:10.1016/j.mtphys.2018.02.005 · Cited by 359
Self-citationZhang, Q., Ai, X., Wang, L., Chang, Y., Luo, W., Jiang, W., & Chen, L. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201402663 · Cited by 296
Su, H., Lei, S., Chen, Y., Lv, Y., & Zhang, Q. (2025) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5c16158 · Cited by 4
Metadata
- Authors
- Zhao, L.-D., He, J., Wu, C.-I., Hogan, T. P., Zhou, X., Uher, C., Dravid, V. P., & Kanatzidis, M. G.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-04-27
- Volume
- 134
- Issue
- 18
- Pages
- 7902-7912
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2075482120
- Cited by
- 266
- References
- 35
- FWCI
- 8.83
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.