The DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
Pt Skin on AuCu Intermetallic Substrate: A Strategy to Maximize Pt Utilization for Fuel Cells
Abstract
The dependence on Pt catalysts has been a major issue of proton-exchange membrane (PEM) fuel cells. Strategies to maximize the Pt utilization in catalysts include two main approaches: to put Pt atoms only at the catalyst surface and to further enhance the surface-specific catalytic activity (SA) of Pt. Thus far there has been no practical design that combines these two features into one single catalyst. Here we report a combined computational and experimental study on the design and implementation of Pt-skin catalysts with significantly improved SA toward the oxygen reduction reaction (ORR). Through screening, using density functional theory (DFT) calculations, a Pt-skin structure on AuCu(111) substrate, consisting of 1.5 monolayers of Pt, is found to have an appropriately weakened oxygen affinity, in comparison to that on Pt(111), which would be ideal for ORR catalysis. Such a structure is then realized by substituting the Cu atoms in three surface layers of AuCu intermetallic nanoparticles (AuCu iNPs) with Pt. The resulting Pt-skinned catalyst (denoted as Pt(S)AuCu iNPs) has been characterized in depth using synchrotron XRD, XPS, HRTEM, and HAADF-STEM/EDX, such that the Pt-skin structure is unambiguously identified. The thickness of the Pt skin was determined to be less than two atomic layers. Finally the catalytic activity of Pt(S)AuCu iNPs toward the ORR was measured via rotating disk electrode (RDE) voltammetry through which it was established that the SA was more than 2 times that of a commercial Pt/C catalyst. Taking into account the ultralow Pt loading in Pt(S)AuCu iNPs, the mass-specific catalytic activity (MA) was determined to be 0.56 A/mg(Pt)@0.9 V, a value that is well beyond the DOE 2017 target for ORR catalysts (0.44 A/mg(Pt)@0.9 V). These findings provide a strategic design and a realizable approach to high-performance and Pt-efficient catalysts for fuel cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Origin of the Overpotential for Oxygen Reduction at a Fuel-Cell Cathode
Nørskov, J. K., Rossmeisl, J., Logadottir, A., Lindqvist, L., Kitchin, J. R., Bligaard, T., & Jónsson, H. (2004) · The Journal of Physical Chemistry B · doi:10.1021/jp047349j · Cited by 13,153
Electrocatalyst approaches and challenges for automotive fuel cells
Debe, M. K. (2012) · Nature · doi:10.1038/nature11115 · Cited by 5,885
Gasteiger, H. A., Kocha, S. S., Sompalli, B., & Wagner, F. T. (2005) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2004.06.021 · Cited by 4,876
Improved Oxygen Reduction Activity on Pt 3 Ni(111) via Increased Surface Site Availability
Stamenkovic, V. R., Fowler, B., Mun, B. S., Wang, G., Ross, P. N., Lucas, C. A., & Marković, N. M. (2007) · Science · doi:10.1126/science.1135941 · Cited by 4,421
Self-citationTrends in electrocatalysis on extended and nanoscale Pt-bimetallic alloy surfaces
Stamenkovic, V. R., Mun, B. S., Arenz, M., Mayrhofer, K. J. J., Lucas, C. A., Wang, G., Ross, P. N., & Markovic, N. M. (2007) · Nature Materials · doi:10.1038/nmat1840 · Cited by 3,252
Self-citationAlloys of platinum and early transition metals as oxygen reduction electrocatalysts
Greeley, J., Stephens, I. E. L., Bondarenko, A. S., Johansson, T. P., Hansen, H. A., Jaramillo, T. F., Rossmeisl, J., Chorkendorff, I., & Nørskov, J. K. (2009) · Nature Chemistry · doi:10.1038/nchem.367 · Cited by 3,203
Zhang, J., Vukmirovic, M. B., Xu, Y., Mavrikakis, M., & Adzic, R. R. (2005) · Angewandte Chemie International Edition · doi:10.1002/anie.200462335 · Cited by 1,106
Platinum-Based Oxygen Reduction Electrocatalysts
Wu, J., & Yang, H. (2013) · Accounts of Chemical Research · doi:10.1021/ar300359w · Cited by 1,050
Wang, J. X., Inada, H., Wu, L., Zhu, Y., Choi, Y., Liu, P., Zhou, W.-P., & Adzic, R. R. (2009) · Journal of the American Chemical Society · doi:10.1021/ja9067645 · Cited by 719
Maillard, F., Schreier, S., Hanzlik, M., Savinova, E. R., Weinkauf, S., & Stimming, U. (2005) · Phys. Chem. Chem. Phys. · doi:10.1039/b411377b · Cited by 448
Cited by
Recent Advances in Electrocatalysts for Oxygen Reduction Reaction
Shao, M., Chang, Q., Dodelet, J.-P., & Chenitz, R. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00462 · Cited by 3,903
Recent advancements in Pt and Pt-free catalysts for oxygen reduction reaction
Nie, Y., Li, L., & Wei, Z. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00484a · Cited by 2,156
Surface and Interface Control in Nanoparticle Catalysis
Xie, C., Niu, Z., Kim, D., Li, M., & Yang, P. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00220 · Cited by 864
Highly Durable and Active PtFe Nanocatalyst for Electrochemical Oxygen Reduction Reaction
Chung, D. Y., Jun, S. W., Yoon, G., Kwon, S. G., Shin, D. Y., Seo, P., Yoo, J. M., Shin, H., Chung, Y.-H., Kim, H., et al. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b09653 · Cited by 677
Electrocatalysis in Alkaline Media and Alkaline Membrane-Based Energy Technologies
Yang, Y., Peltier, C. R., Zeng, R., Schimmenti, R., Li, Q., Huang, X., Yan, Z., Potsi, G., Selhorst, R., Lu, X., et al. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00331 · Cited by 544
Self-citationNew Approach to Fully Ordered fct-FePt Nanoparticles for Much Enhanced Electrocatalysis in Acid
Li, Q., Wu, L., Wu, G., Su, D., Lv, H., Zhang, S., Zhu, W., Casimir, A., Zhu, H., Mendoza-Garcia, A., et al. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00320 · Cited by 460
Surface evolution of a Pt–Pd–Au electrocatalyst for stable oxygen reduction
Li, J., Yin, H.-M., Li, X.-B., Okunishi, E., Shen, Y.-L., He, J., Tang, Z.-K., Wang, W.-X., Yücelen, E., Li, C., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.111 · Cited by 405
Tian, X., Luo, J., Nan, H., Zou, H., Chen, R., Shu, T., Li, X., Li, Y., Song, H., Liao, S., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b11364 · Cited by 400
Intermetallic Nanoparticles: Synthetic Control and Their Enhanced Electrocatalysis
Li, J., & Sun, S. (2019) · Accounts of Chemical Research · doi:10.1021/acs.accounts.9b00172 · Cited by 354
Recent Advances of Structurally Ordered Intermetallic Nanoparticles for Electrocatalysis
Xiao, W., Lei, W., Gong, M., Xin, H. L., & Wang, D. (2018) · ACS Catalysis · doi:10.1021/acscatal.7b04420 · Cited by 356
Self-citationLi, C., Tan, H., Lin, J., Luo, X., Wang, S., You, J., Kang, Y.-M., Bando, Y., Yamauchi, Y., & Kim, J. (2018) · Nano Today · doi:10.1016/j.nantod.2018.06.005 · Cited by 336
Atomic Arrangement Engineering of Metallic Nanocrystals for Energy-Conversion Electrocatalysis
Liang, J., Ma, F., Hwang, S., Wang, X., Sokolowski, J., Li, Q., Wu, G., & Su, D. (2019) · Joule · doi:10.1016/j.joule.2019.03.014 · Cited by 305
Defect‐Rich Porous Palladium Metallene for Enhanced Alkaline Oxygen Reduction Electrocatalysis
Yu, H., Zhou, T., Wang, Z., Xu, Y., Li, X., Wang, L., & Wang, H. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202101019 · Cited by 298
Xiong, Y., Yang, Y., Joress, H., Padgett, E., Gupta, U., Yarlagadda, V., Agyeman-Budu, D. N., Huang, X., Moylan, T. E., Zeng, R., et al. (2019) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1815643116 · Cited by 173
Self-citationZhang, C., Liang, X., Xu, R., Dai, C., Wu, B., Yu, G., Chen, B., Wang, X., & Liu, N. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202008298 · Cited by 150
Liu, L., Chen, L.-X., Wang, A.-J., Yuan, J., Shen, L., & Feng, J.-J. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.03.208 · Cited by 58
Yue, J., Du, Z., & Shao, M. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b01345 · Cited by 40
Wang, J., Chen, F., Jin, Y., & Johnston, R. L. (2018) · ChemSusChem · doi:10.1002/cssc.201800052 · Cited by 40
Metadata
- Authors
- Wang, G., Huang, B., Xiao, L., Ren, Z., Chen, H., Wang, D., Abruña, H. D., Lu, J., & Zhuang, L.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-06-25
- Volume
- 136
- Issue
- 27
- Pages
- 9643-9649
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2319301225
- Cited by
- 242
- References
- 12
- FWCI
- 9.61
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.