The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Ordered Mesoporous Alumina-Supported Metal Oxides
Abstract
The one-pot synthesis of alumina-supported metal oxides via self-assembly of a metal precursor and aluminum isopropoxide in the presence of triblock copolymer (as a structure directing agent) is described in detail for nickel oxide. The resulting mesoporous mixed metal oxides possess p6 mm hexagonal symmetry, well-developed mesoporosity, relatively high BET surface area, large pore widths, and crystalline pore walls. In comparison to pure alumina, nickel aluminum oxide samples exhibited larger mesopores and improved thermal stability. Also, long-range ordering of the aforementioned samples was observed for nickel molar percentages as high as 20%. The generality of the recipe used for the synthesis of mesoporous nickel aluminum oxide was demonstrated by preparation of other alumina-supported metal oxides such as MgO, CaO, TiO 2, and Cr 2O 3. This method represents an important step toward the facile and reproducible synthesis of ordered mesoporous alumina-supported materials for various applications where large and accessible pores with high loading of catalytically active metal oxides are needed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized syntheses of large-pore mesoporous metal oxides with semicrystalline frameworks
Yang, P., Zhao, D., Margolese, D. I., Chmelka, B. F., & Stucky, G. D. (1998) · Nature · doi:10.1038/24132 · Cited by 2,493
What is a green solvent? A comprehensive framework for the environmental assessment of solvents
Capello, C., Fischer, U., & Hungerbühler, K. (2007) · Green Chemistry · doi:10.1039/b617536h · Cited by 1,917
Cited by
Synthesis of non-siliceous mesoporous oxides
Gu, D., & Schüth, F. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60155b · Cited by 584
Large-pore ordered mesoporous materials templated from non-pluronic amphiphilic block copolymers
Deng, Y., Wei, J., Sun, Z., & Zhao, D. (2013) · Chem. Soc. Rev. · doi:10.1039/c2cs35426h · Cited by 447
Ma, J., Ren, Y., Zhou, X., Liu, L., Zhu, Y., Cheng, X., Xu, P., Li, X., Deng, Y., & Zhao, D. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705268 · Cited by 351
Marinho, A. L. A., Toniolo, F. S., Noronha, F. B., Epron, F., Duprez, D., & Bion, N. (2021) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2020.119459 · Cited by 257
Metadata
- Authors
- Morris, S. M., Fulvio, P. F., & Jaroniec, M.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2008-10-16
- Volume
- 130
- Issue
- 45
- Pages
- 15210-15216
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2010578002
- Cited by
- 384
- References
- 2
- FWCI
- 7.92
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
