Anisotropic Strain Tuning of L10 Ternary Nanoparticles for Oxygen Reduction
The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Abstract
Tuning the performance of nanoparticle (NP) catalysts by controlling the NP surface strain has evolved as an important strategy to optimize NP catalysis in many energy conversion reactions. Here, we present our new study on using an eigenforce model to predict and experiments to verify the strain-induced catalysis enhancement of the oxygen reduction reaction (ORR) in the presence of L1 0 -CoMPt NPs (M = Mn, Fe, Ni, Cu, Ni). The eigenforce model allowed us to predict anisotropic (that is, two-dimensional) strain levels on distorted Pt(111) surfaces. Experimentally, by preparing a series of 5 nm L1 0 -CoMPt NPs, we could push the ORR catalytic activity of these NPs toward the optimum region of the theoretical two-dimensional volcano plot predicted for L1 0 -CoMPt. The best ORR catalyst in the alloy NP series we studied is L1 0 -CoNiPt, which has a mass activity of 3.1 A/mg Pt and a specific activity of 9.3 mA/cm 2 at room temperature with only 15.9% loss of mass activity after 30 000 cycles at 60 °C in 0.1 M HClO 4 .
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hammer, B., Hansen, L. B., & Nørskov, J. K. (1999) · Physical Review B · doi:10.1103/physrevb.59.7413 · Cited by 8,270
Lattice-strain control of the activity in dealloyed core–shell fuel cell catalysts
Strasser, P., Koh, S., Anniyev, T., Greeley, J., More, K., Yu, C., Liu, Z., Kaya, S., Nordlund, D., Ogasawara, H., et al. (2010) · Nature Chemistry · doi:10.1038/nchem.623 · Cited by 2,984
Wang, D., Xin, H. L., Hovden, R., Wang, H., Yu, Y., Muller, D. A., DiSalvo, F. J., & Abruña, H. D. (2013) · Nature Materials · doi:10.1038/nmat3458 · Cited by 2,082
Biaxially strained PtPb/Pt core/shell nanoplate boosts oxygen reduction catalysis
Bu, L., Zhang, N., Guo, S., Zhang, X., Li, J., Yao, J., Wu, T., Lu, G., Ma, J.-Y., Su, D., et al. (2016) · Science · doi:10.1126/science.aah6133 · Cited by 1,642
Self-citationUltrafine jagged platinum nanowires enable ultrahigh mass activity for the oxygen reduction reaction
Li, M., Zhao, Z., Cheng, T., Fortunelli, A., Chen, C.-Y., Yu, R., Zhang, Q., Gu, L., Merinov, B. V., Lin, Z., et al. (2016) · Science · doi:10.1126/science.aaf9050 · Cited by 1,605
Strain-controlled electrocatalysis on multimetallic nanomaterials
Luo, M., & Guo, S. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.59 · Cited by 1,115
Tuning the activity of Pt alloy electrocatalysts by means of the lanthanide contraction
Escudero-Escribano, M., Malacrida, P., Hansen, M. H., Vej-Hansen, U. G., Velázquez-Palenzuela, A., Tripkovic, V., Schiøtz, J., Rossmeisl, J., Stephens, I. E. L., & Chorkendorff, I. (2016) · Science · doi:10.1126/science.aad8892 · Cited by 1,057
Hard-Magnet L10-CoPt Nanoparticles Advance Fuel Cell Catalysis
Li, J., Sharma, S., Liu, X., Pan, Y.-T., Spendelow, J. S., Chi, M., Jia, Y., Zhang, P., Cullen, D. A., Xi, Z., et al. (2019) · Joule · doi:10.1016/j.joule.2018.09.016 · Cited by 532
Self-citationNew Approach to Fully Ordered fct-FePt Nanoparticles for Much Enhanced Electrocatalysis in Acid
Li, Q., Wu, L., Wu, G., Su, D., Lv, H., Zhang, S., Zhu, W., Casimir, A., Zhu, H., Mendoza-Garcia, A., et al. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00320 · Cited by 460
Self-citationIntermetallic Nanoparticles: Synthetic Control and Their Enhanced Electrocatalysis
Li, J., & Sun, S. (2019) · Accounts of Chemical Research · doi:10.1021/acs.accounts.9b00172 · Cited by 354
Self-citation
Cited by
Magnetic Nanoparticles: Synthesis, Anisotropy, and Applications
Ma, Z., Mohapatra, J., Wei, K., Liu, J. P., & Sun, S. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00860 · Cited by 350
Self-citationDefect Engineering in Nanocatalysts: From Design and Synthesis to Applications
Muhammad, P., Zada, A., Rashid, J., Hanif, S., Gao, Y., Li, C., Li, Y., Fan, K., & Wang, Y. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202314686 · Cited by 350
High‐Entropy Alloys for Electrocatalysis: Design, Characterization, and Applications
Zhang, Y., Wang, D., & Wang, S. (2022) · Small · doi:10.1002/smll.202104339 · Cited by 296
Strain Engineering in Electrocatalysts: Fundamentals, Progress, and Perspectives
Yang, X., Wang, Y., Tong, X., & Yang, N. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202102261 · Cited by 277
Intermetallic Nanocrystals for Fuel-Cells-Based Electrocatalysis
Lin, F., Li, M., Zeng, L., Luo, M., & Guo, S. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00382 · Cited by 257
Metadata
- Authors
- Li, J., Sharma, S., Wei, K., Chen, Z., Morris, D., Lin, H., Zeng, C., Chi, M., Yin, Z., Muzzio, M., Shen, M., Zhang, P., Peterson, A. A., & Sun, S.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-10-30
- Volume
- 142
- Issue
- 45
- Pages
- 19209-19216
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W3097676664
- Cited by
- 128
- References
- 10
- FWCI
- 3.37
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Anisotropic Strain Tuning of L10 Ternary Nanoparticles for Oxygen Reduction. https://app.cochat.ai/papers/10.1021/jacs.0c08962
- The paper
- Li, J., Sharma, S., Wei, K., Chen, Z., Morris, D., Lin, H., Zeng, C., Chi, M., Yin, Z., Muzzio, M., Shen, M., Zhang, P., Peterson, A. A., & Sun, S. (2020). Anisotropic Strain Tuning of L10 Ternary Nanoparticles for Oxygen Reduction. Journal of the American Chemical Society. https://doi.org/10.1021/jacs.0c08962
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.