The DOI matches its Crossref record; 62 of the 62 references it cites were found in a registry or an index.
n-Type Water/Alcohol-Soluble Naphthalene Diimide-Based Conjugated Polymers for High-Performance Polymer Solar Cells
Abstract
With the demonstration of small-area, single-junction polymer solar cells (PSCs) with power conversion efficiencies (PCEs) over the 10% performance milestone, the manufacturing of high-performance large-area PSC modules is becoming the most critical issue for commercial applications. However, materials and processes that are optimized for fabricating small-area devices may not be applicable for the production of high-performance large-area PSC modules. One of the challenges is to develop new conductive interfacial materials that can be easily processed with a wide range of thicknesses without significantly affecting the performance of the PSCs. Toward this goal, we report two novel naphthalene diimide-based, self-doped, n-type water/alcohol-soluble conjugated polymers (WSCPs) that can be processed with a broad thickness range of 5 to 100 nm as efficient electron transporting layers (ETLs) for high-performance PSCs. Space charge limited current and electron spin resonance spectroscopy studies confirm that the presence of amine or ammonium bromide groups on the side chains of the WSCP can n-dope PC71BM at the bulk heterojunction (BHJ)/ETL interface, which improves the electron extraction properties at the cathode. In addition, both amino functional groups can induce self-doping to the WSCPs, although by different doping mechanisms, which leads to highly conductive ETLs with reduced ohmic loss for electron transport and extraction. Ultimately, PSCs based on the self-doped WSCP ETLs exhibit significantly improved device performance, yielding PCEs as high as 9.7% and 10.11% for PTB7-Th/PC71BM and PffBT4T-2OD/PC71BM systems, respectively. More importantly, with PffBT4T-2OD/PC71BM BHJ as an active layer, a prominent PCE of over 8% was achieved even when a thick ETL of 100 nm was used. To the best of our knowledge, this is the highest efficiency demonstrated for PSCs with a thick interlayer and light-harvesting layer, which are important criteria for eventually making organic photovoltaic modules based on roll-to-roll coating processes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Li, G., Zhu, R., & Yang, Y. (2012) · Nature Photonics · doi:10.1038/nphoton.2012.11 · Cited by 4,414
Polymer–Fullerene Composite Solar Cells
Thompson, B. C., & Fréchet, J. M. J. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200702506 · Cited by 4,150
Synthesis of Conjugated Polymers for Organic Solar Cell Applications
Cheng, Y.-J., Yang, S.-H., & Hsu, C.-S. (2009) · Chemical Reviews · doi:10.1021/cr900182s · Cited by 3,972
Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells
Liu, Y., Zhao, J., Li, Z., Mu, C., Ma, W., Hu, H., Jiang, K., Lin, H., Ade, H., & Yan, H. (2014) · Nature Communications · doi:10.1038/ncomms6293 · Cited by 3,106
A high-mobility electron-transporting polymer for printed transistors
Yan, H., Chen, Z., Zheng, Y., Newman, C., Quinn, J. R., Dötz, F., Kastler, M., & Facchetti, A. (2009) · Nature · doi:10.1038/nature07727 · Cited by 3,009
Li, Y. (2012) · Accounts of Chemical Research · doi:10.1021/ar2002446 · Cited by 2,756
25th Anniversary Article: Bulk Heterojunction Solar Cells: Understanding the Mechanism of Operation
Heeger, A. J. (2014) · Advanced Materials · doi:10.1002/adma.201304373 · Cited by 1,723
Single-junction polymer solar cells with high efficiency and photovoltage
He, Z., Xiao, B., Liu, F., Wu, H., Yang, Y., Xiao, S., Wang, C., Russell, T. P., & Cao, Y. (2015) · Nature Photonics · doi:10.1038/nphoton.2015.6 · Cited by 1,675
Self-citationHighly Efficient Organic Devices Based on Electrically Doped Transport Layers
Walzer, K., Maennig, B., Pfeiffer, M., & Leo, K. (2007) · Chemical Reviews · doi:10.1021/cr050156n · Cited by 1,560
Pavlishchuk, V. V., & Addison, A. W. (2000) · Inorganica Chimica Acta · doi:10.1016/s0020-1693(99)00407-7 · Cited by 1,518
Cited by
Organic and solution-processed tandem solar cells with 17.3% efficiency
Meng, L., Zhang, Y., Wan, X., Li, C., Zhang, X., Wang, Y., Ke, X., Xiao, Z., Ding, L., Xia, R., et al. (2018) · Science · doi:10.1126/science.aat2612 · Cited by 2,527
Self-citationFunctional Naphthalene Diimides: Synthesis, Properties, and Applications
Al Kobaisi, M., Bhosale, S. V., Latham, K., Raynor, A. M., & Bhosale, S. V. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00160 · Cited by 928
Yao, J., Qiu, B., Zhang, Z.-G., Xue, L., Wang, R., Zhang, C., Chen, S., Zhou, Q., Sun, C., Yang, C., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-16509-w · Cited by 781
Self-citationRecent Advances, Design Guidelines, and Prospects of All-Polymer Solar Cells
Lee, C., Lee, S., Kim, G.-U., Lee, W., & Kim, B. J. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00044 · Cited by 741
Sun, R., Wu, Y., Yang, X., Gao, Y., Chen, Z., Li, K., Qiao, J., Wang, T., Guo, J., Liu, C., et al. (2022) · Advanced Materials · doi:10.1002/adma.202110147 · Cited by 621
Recent progress in organic solar cells (Part I material science)
Liu, Y., Liu, B., Ma, C.-Q., Huang, F., Feng, G., Chen, H., Hou, J., Yan, L., Wei, Q., Luo, Q., et al. (2022) · Science China Chemistry · doi:10.1007/s11426-021-1180-6 · Cited by 613
Self-citationZhang, G., Zhang, K., Yin, Q., Jiang, X.-F., Wang, Z., Xin, J., Ma, W., Yan, H., Huang, F., & Cao, Y. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b11991 · Cited by 435
Self-citationInterfacial Dipole in Organic and Perovskite Solar Cells
Chen, Q., Wang, C., Li, Y., & Chen, L. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.0c07439 · Cited by 397
Naphthalene diimides: perspectives and promise
Bhosale, S. V., Al Kobaisi, M., Jadhav, R. W., Morajkar, P. P., Jones, L. A., & George, S. (2021) · Chemical Society Reviews · doi:10.1039/d0cs00239a · Cited by 394
High-Performance n-Type Polymer Semiconductors: Applications, Recent Development, and Challenges
Sun, H., Guo, X., & Facchetti, A. (2020) · Chem · doi:10.1016/j.chempr.2020.05.012 · Cited by 390
Organic Solar Cell Materials toward Commercialization
Xue, R., Zhang, J., Li, Y., & Li, Y. (2018) · Small · doi:10.1002/smll.201801793 · Cited by 304
n-Type Molecular Photovoltaic Materials: Design Strategies and Device Applications
Yue, Q., Liu, W., & Zhu, X. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.0c04084 · Cited by 279
Interlayers for non-fullerene based polymer solar cells: distinctive features and challenges
Sorrentino, R., Kozma, E., Luzzati, S., & Po, R. (2021) · Energy & Environmental Science · doi:10.1039/d0ee02503h · Cited by 265
Liang, T., Xiao, L., Gao, K., Xu, W., Peng, X., & Cao, Y. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b15241 · Cited by 60
Self-citation
Metadata
- Authors
- Wu, Z., Sun, C., Dong, S., Jiang, X.-F., Wu, S., Wu, H., Yip, H.-L., Huang, F., & Cao, Y.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-02-04
- Volume
- 138
- Issue
- 6
- Pages
- 2004-2013
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2270253191
- Cited by
- 684
- References
- 62
- FWCI
- 37.05
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.