The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Fabrication of Efficient Low-Bandgap Perovskite Solar Cells by Combining Formamidinium Tin Iodide with Methylammonium Lead Iodide
Open accessAbstract
Mixed tin (Sn)-lead (Pb) perovskites with high Sn content exhibit low bandgaps suitable for fabricating the bottom cell of perovskite-based tandem solar cells. In this work, we report on the fabrication of efficient mixed Sn-Pb perovskite solar cells using precursors combining formamidinium tin iodide (FASnI3) and methylammonium lead iodide (MAPbI3). The best-performing cell fabricated using a (FASnI3)0.6(MAPbI3)0.4 absorber with an absorption edge of ∼1.2 eV achieved a power conversion efficiency (PCE) of 15.08 (15.00)% with an open-circuit voltage of 0.795 (0.799) V, a short-circuit current density of 26.86(26.82) mA/cm(2), and a fill factor of 70.6(70.0)% when measured under forward (reverse) voltage scan. The average PCE of 50 cells we have fabricated is 14.39 ± 0.33%, indicating good reproducibility.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Electron-hole diffusion lengths > 175 μm in solution-grown CH 3 NH 3 PbI 3 single crystals
Dong, Q., Fang, Y., Shao, Y., Mulligan, P., Qiu, J., Cao, L., & Huang, J. (2015) · Science · doi:10.1126/science.aaa5760 · Cited by 5,643
Stoumpos, C. C., Malliakas, C. D., & Kanatzidis, M. G. (2013) · Inorganic Chemistry · doi:10.1021/ic401215x · Cited by 5,416
A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells
McMeekin, D. P., Sadoughi, G., Rehman, W., Eperon, G. E., Saliba, M., Hörantner, M. T., Haghighirad, A., Sakai, N., Korte, L., Rech, B., et al. (2016) · Science · doi:10.1126/science.aad5845 · Cited by 3,067
Ahn, N., Son, D.-Y., Jang, I.-H., Kang, S. M., Choi, M., & Park, N.-G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b04930 · Cited by 2,312
All-solid-state dye-sensitized solar cells with high efficiency
Chung, I., Lee, B., He, J., Chang, R. P. H., & Kanatzidis, M. G. (2012) · Nature · doi:10.1038/nature11067 · Cited by 1,833
Hao, F., Stoumpos, C. C., Chang, R. P. H., & Kanatzidis, M. G. (2014) · Journal of the American Chemical Society · doi:10.1021/ja5033259 · Cited by 1,501
Lead‐Free Halide Perovskite Solar Cells with High Photocurrents Realized Through Vacancy Modulation
Kumar, M. H., Dharani, S., Leong, W. L., Boix, P. P., Prabhakar, R. R., Baikie, T., Shi, C., Ding, H., Ramesh, R., Asta, M., et al. (2014) · Advanced Materials · doi:10.1002/adma.201401991 · Cited by 1,209
CH3NH3SnxPb(1–x)I3 Perovskite Solar Cells Covering up to 1060 nm
Ogomi, Y., Morita, A., Tsukamoto, S., Saitho, T., Fujikawa, N., Shen, Q., Toyoda, T., Yoshino, K., Pandey, S. S., Ma, T., et al. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5002117 · Cited by 978
Lee, S. J., Shin, S. S., Kim, Y. C., Kim, D., Ahn, T. K., Noh, J. H., Seo, J., & Seok, S. I. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b00142 · Cited by 817
Liao, W., Zhao, D., Yu, Y., Grice, C. R., Wang, C., Cimaroli, A. J., Schulz, P., Meng, W., Zhu, K., Xiong, R., et al. (2016) · Advanced Materials · doi:10.1002/adma.201602992 · Cited by 793
Self-citationSemi-transparent perovskite solar cells for tandems with silicon and CIGS
Bailie, C. D., Christoforo, M. G., Mailoa, J. P., Bowring, A. R., Unger, E. L., Nguyen, W. H., Burschka, J., Pellet, N., Lee, J. Z., Grätzel, M., et al. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03322a · Cited by 741
Ke, W., Xiao, C., Wang, C., Saparov, B., Duan, H., Zhao, D., Xiao, Z., Schulz, P., Harvey, S. P., Liao, W., et al. (2016) · Advanced Materials · doi:10.1002/adma.201600594 · Cited by 579
Self-citationFormamidinium tin-based perovskite with low Eg for photovoltaic applications
Koh, T. M., Krishnamoorthy, T., Yantara, N., Shi, C., Leong, W. L., Boix, P. P., Grimsdale, A. C., Mhaisalkar, S. G., & Mathews, N. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00190k · Cited by 576
High‐Efficiency Solution‐Processed Planar Perovskite Solar Cells with a Polymer Hole Transport Layer
Zhao, D., Sexton, M., Park, H., Baure, G., Nino, J. C., & So, F. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401855 · Cited by 380
Self-citationStable Low‐Bandgap Pb–Sn Binary Perovskites for Tandem Solar Cells
Yang, Z., Rajagopal, A., Chueh, C., Jo, S. B., Liu, B., Zhao, T., & Jen, A. K. ‐. (2016) · Advanced Materials · doi:10.1002/adma.201602696 · Cited by 367
Binary‐Metal Perovskites Toward High‐Performance Planar‐Heterojunction Hybrid Solar Cells
Zuo, F., Williams, S. T., Liang, P., Chueh, C., Liao, C., & Jen, A. K. ‐. (2014) · Advanced Materials · doi:10.1002/adma.201401641 · Cited by 335
Organic Cation‐Dependent Degradation Mechanism of Organotin Halide Perovskites
Wang, F., Ma, J., Xie, F., Li, L., Chen, J., Fan, J., & Zhao, N. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201505127 · Cited by 285
Heo, J. H., & Im, S. H. (2016) · Advanced Materials · doi:10.1002/adma.201501629 · Cited by 266
Im, J., Stoumpos, C. C., Jin, H., Freeman, A. J., & Kanatzidis, M. G. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b01738 · Cited by 255
Zhao, Y., & Zhu, K. (2014) · Journal of the American Chemical Society · doi:10.1021/ja5071398 · Cited by 242
Self-citationLow‐Temperature Fabrication of Efficient Wide‐Bandgap Organolead Trihalide Perovskite Solar Cells
Bi, C., Yuan, Y., Fang, Y., & Huang, J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401616 · Cited by 164
Cited by
Halide Perovskite Photovoltaics: Background, Status, and Future Prospects
Jena, A. K., Kulkarni, A., & Miyasaka, T. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00539 · Cited by 3,087
Opportunities and challenges for tandem solar cells using metal halide perovskite semiconductors
Leijtens, T., Bush, K. A., Prasanna, R., & McGehee, M. D. (2018) · Nature Energy · doi:10.1038/s41560-018-0190-4 · Cited by 1,121
Lin, R., Xiao, K., Qin, Z., Han, Q., Zhang, C., Wei, M., Saidaminov, M. I., Gao, Y., Xu, J., Xiao, M., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0466-3 · Cited by 1,073
Prasanna, R., Gold-Parker, A., Leijtens, T., Conings, B., Babayigit, A., Boyen, H.-G., Toney, M. F., & McGehee, M. D. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b04981 · Cited by 893
Synthetic Approaches for Halide Perovskite Thin Films
Dunlap-Shohl, W. A., Zhou, Y., Padture, N. P., & Mitzi, D. B. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00318 · Cited by 631
Metadata
- Authors
- Liao, W., Zhao, D., Yu, Y., Shrestha, N., Ghimire, K., Grice, C. R., Wang, C., Xiao, Y., Cimaroli, A. J., Ellingson, R. J., Podraza, N. J., Zhu, K., Xiong, R.-G., & Yan, Y.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-09-19
- Volume
- 138
- Issue
- 38
- Pages
- 12360-12363
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2519346103
- Cited by
- 438
- References
- 23
- FWCI
- 27.14
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.