The DOI matches its Crossref record.
Bottom-Up Fabrication of Sulfur-Doped Graphene Films Derived from Sulfur-Annulated Nanographene for Ultrahigh Volumetric Capacitance Micro-Supercapacitors
Open accessAbstract
Heteroatom doping of nanocarbon films can efficiently boost the pseudocapacitance of micro-supercapacitors (MSCs); however, wafer-scale fabrication of sulfur-doped graphene films with a tailored thickness and homogeneous doping for MSCs remains a great challenge. Here we demonstrate the bottom-up fabrication of continuous, uniform, and ultrathin sulfur-doped graphene (SG) films, derived from the peripherical trisulfur-annulated hexa- peri -hexabenzocoronene (SHBC), for ultrahigh-rate MSCs (SG-MSCs) with landmark volumetric capacitance. The SG film was prepared by thermal annealing of the spray-coated SHBC-based film, with assistance of a thin Au protecting layer, at 800 °C for 30 min. SHBC with 12 phenylthio groups decorated at the periphery is critical as a precursor for the formation of the continuous and ultrathin SG film, with a uniform thickness of ∼10.0 nm. Notably, the as-produced all-solid-state planar SG-MSCs exhibited a highly stable pseudocapacitive behavior with a volumetric capacitance of ∼582 F cm –3 at 10 mV s –1, excellent rate capability with a remarkable capacitance of 8.1 F cm –3 even at an ultrahigh rate of 2000 V s –1, ultrafast frequency response with a short time constant of 0.26 ms, and ultrahigh power density of ∼1191 W cm –3 . It is noteworthy that these values obtained are among the best values for carbon-based MSCs reported to date.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Latest advances in supercapacitors: from new electrode materials to novel device designs
Wang, F., Wu, X., Yuan, X., Liu, Z., Zhang, Y., Fu, L., Zhu, Y., Zhou, Q., Wu, Y., & Huang, W. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00205j · Cited by 2,011
Selective Molecular Separation by Interfacially Crystallized Covalent Organic Framework Thin Films
Dey, K., Pal, M., Rout, K. C., Kunjattu H, S., Das, A., Mukherjee, R., Kharul, U. K., & Banerjee, R. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b06640 · Cited by 1,060
Feng, X., Bai, Y., Liu, M., Li, Y., Yang, H., Wang, X., & Wu, C. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00166c · Cited by 761
Self-citationHighly Self-Healable 3D Microsupercapacitor with MXene–Graphene Composite Aerogel
Yue, Y., Liu, N., Ma, Y., Wang, S., Liu, W., Luo, C., Zhang, H., Cheng, F., Rao, J., Hu, X., et al. (2018) · ACS Nano · doi:10.1021/acsnano.7b07528 · Cited by 736
Self-citationKumar, R., Sahoo, S., Joanni, E., Singh, R. K., Tan, W. K., Kar, K. K., & Matsuda, A. (2019) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2019.100786 · Cited by 554
Metadata
- Authors
- Wu, Z.-S., Tan, Y.-Z., Zheng, S., Wang, S., Parvez, K., Qin, J., Shi, X., Sun, C., Bao, X., Feng, X., & Müllen, K.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-03-17
- Volume
- 139
- Issue
- 12
- Pages
- 4506-4512
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2594050955
- Cited by
- 333
- References
- 0
- FWCI
- 16.19
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Bottom-Up Fabrication of Sulfur-Doped Graphene Films Derived from Sulfur-Annulated Nanographene for Ultrahigh Volumetric Capacitance Micro-Supercapacitors. https://app.cochat.ai/papers/10.1021/jacs.7b00805
- The paper
- Wu, Z.-S., Tan, Y.-Z., Zheng, S., Wang, S., Parvez, K., Qin, J., Shi, X., Sun, C., Bao, X., Feng, X., & Müllen, K. (2017). Bottom-Up Fabrication of Sulfur-Doped Graphene Films Derived from Sulfur-Annulated Nanographene for Ultrahigh Volumetric Capacitance Micro-Supercapacitors. Journal of the American Chemical Society. https://doi.org/10.1021/jacs.7b00805
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.