The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Low Thermal Conductivity and High Thermoelectric Performance in (GeTe)1–2 x(GeSe)x(GeS)x: Competition between Solid Solution and Phase Separation
Abstract
GeTe and its derivatives constituting Pb-free elements have been well known as potential thermoelectric materials for the last five decades, which offer paramount technological importance. The main constraint in the way of optimizing thermoelectric performance of GeTe is the high lattice thermal conductivity (κ lat ). Herein, we demonstrate low κ lat (∼0.7 W/m·K) and a significantly high thermoelectric figure of merit (ZT = 2.1 at 630 K) in the Sb-doped pseudoternary (GeTe) 1–2 x (GeSe) x (GeS) x system by two-step strategies. The (GeTe) 1–2 x (GeSe) x (GeS) x system provides an excellent podium to investigate competition between an entropy-driven solid solution and enthalpy-driven phase separation. In the first step, small concentrations of Se and S were substituted simultaneously in the position of Te in GeTe to reduce the κ lat by phonon scattering due to mass fluctuations and point defects. When the Se/S concentration increases significantly, the system deviates from a solid solution, and phase separation of the GeS 1– x Se x (5–20 μm) precipitates in the GeTe 1– x Se x matrix occurs, which does not participate in phonon scattering. In the second stage, κ lat of the optimized sample is further reduced to 0.7 W/m·K by Sb alloying and spark plasma sintering (SPS), which introduce additional phonon scattering centers such as excess solid solution point defects and grain boundaries. The low κ lat in Sb-doped (GeTe) 1–2 x (GeSe) x (GeS) x is attributed to phonon scattering by entropically driven solid solution point defects rather than conventional endotaxial nanostructuring. As a consequence, the SPS-processed Ge 0.9 Sb 0.1 Te 0.9 Se 0.05 S 0.05 sample exhibits a remarkably high ZT of 2.1 at 630 K, which is reproducible and stable over temperature cycles. Moreover, Sb-doped (GeTe) 1–2 x (GeSe) x (GeS) x exhibits significantly higher Vickers microhardness (mechanical stability) compared to that of pristine GeTe.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thermal Conductivity of Silicon and Germanium from 3°K to the Melting Point
Glassbrenner, C. J., & Slack, G. A. (1964) · Physical Review · doi:10.1103/physrev.134.a1058 · Cited by 1,652
Resonant bonding leads to low lattice thermal conductivity
Lee, S., Esfarjani, K., Luo, T., Zhou, J., Tian, Z., & Chen, G. (2014) · Nature Communications · doi:10.1038/ncomms4525 · Cited by 679
Cited by
Advanced Thermoelectric Design: From Materials and Structures to Devices
Shi, X.-L., Zou, J., & Chen, Z.-G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00026 · Cited by 2,524
Enhanced atomic ordering leads to high thermoelectric performance in AgSbTe 2
Roychowdhury, S., Ghosh, T., Arora, R., Samanta, M., Xie, L., Singh, N. K., Soni, A., He, J., Waghmare, U. V., & Biswas, K. (2021) · Science · doi:10.1126/science.abb3517 · Cited by 649
Self-citationLow-Symmetry Rhombohedral GeTe Thermoelectrics
Li, J., Zhang, X., Chen, Z., Lin, S., Li, W., Shen, J., Witting, I. T., Faghaninia, A., Chen, Y., Jain, A., et al. (2018) · Joule · doi:10.1016/j.joule.2018.02.016 · Cited by 583
Manipulation of Phonon Transport in Thermoelectrics
Chen, Z., Zhang, X., & Pei, Y. (2018) · Advanced Materials · doi:10.1002/adma.201705617 · Cited by 542
Routes for high-performance thermoelectric materials
Zhou, X., Yan, Y., Lu, X., Zhu, H., Han, X., Chen, G., & Ren, Z. (2018) · Materials Today · doi:10.1016/j.mattod.2018.03.039 · Cited by 393
Metadata
- Authors
- Samanta, M., & Biswas, K.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-06-28
- Volume
- 139
- Issue
- 27
- Pages
- 9382-9391
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2626395583
- Cited by
- 248
- References
- 2
- FWCI
- 11.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.