The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
CsPb0.9Sn0.1IBr2 Based All-Inorganic Perovskite Solar Cells with Exceptional Efficiency and Stability
Abstract
The emergence of perovskite solar cells (PSCs) has generated enormous interest in the photovoltaic research community. Recently, cesium metal halides (CsMX 3, M = Pb or Sn; X = I, Br, Cl or mixed halides) as a class of inorganic perovskites showed great promise for PSCs and other optoelectronic devices. However, CsMX 3 -based PSCs usually exhibit lower power conversion efficiencies (PCEs) than organic–inorganic hybrid PSCs, due to the unfavorable band gaps. Herein, a novel mixed-Pb/Sn mixed-halide inorganic perovskite, CsPb 0.9 Sn 0.1 IBr 2, with a suitable band gap of 1.79 eV and an appropriate level of valence band maximum, was prepared in ambient atmosphere without a glovebox. After thoroughly eliminating labile organic components and noble metals, the all-inorganic PSCs based on CsPb 0.9 Sn 0.1 IBr 2 and carbon counter electrodes exhibit a high open-circuit voltage of 1.26 V and a remarkable PCE up to 11.33%, which is record-breaking among the existing CsMX 3 -based PSCs. Moreover, the all-inorganic PSCs show good long-term stability and improved endurance against heat and moisture. This study indicates a feasible way to design inorganic halide perovskites through energy-band engineering for the construction of high-performance all-inorganic PSCs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Saliba, M., Matsui, T., Seo, J.-Y., Domanski, K., Correa-Baena, J.-P., Nazeeruddin, M. K., Zakeeruddin, S. M., Tress, W., Abate, A., Hagfeldt, A., et al. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03874j · Cited by 5,440
Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance
Saliba, M., Matsui, T., Domanski, K., Seo, J.-Y., Ummadisingu, A., Zakeeruddin, S. M., Correa-Baena, J.-P., Tress, W. R., Abate, A., Hagfeldt, A., et al. (2016) · Science · doi:10.1126/science.aah5557 · Cited by 3,706
High-efficiency two-dimensional Ruddlesden–Popper perovskite solar cells
Tsai, H., Nie, W., Blancon, J.-C., Stoumpos, C. C., Asadpour, R., Harutyunyan, B., Neukirch, A. J., Verduzco, R., Crochet, J. J., Tretiak, S., et al. (2016) · Nature · doi:10.1038/nature18306 · Cited by 3,384
Quantum dot–induced phase stabilization of α-CsPbI 3 perovskite for high-efficiency photovoltaics
Swarnkar, A., Marshall, A. R., Sanehira, E. M., Chernomordik, B. D., Moore, D. T., Christians, J. A., Chakrabarti, T., & Luther, J. M. (2016) · Science · doi:10.1126/science.aag2700 · Cited by 2,794
Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers
Chen, W., Wu, Y., Yue, Y., Liu, J., Zhang, W., Yang, X., Chen, H., Bi, E., Ashraful, I., Grätzel, M., et al. (2015) · Science · doi:10.1126/science.aad1015 · Cited by 2,279
Self-citationInorganic caesium lead iodide perovskite solar cells
Eperon, G. E., Paternò, G. M., Sutton, R. J., Zampetti, A., Haghighirad, A. A., Cacialli, F., & Snaith, H. J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta06398a · Cited by 1,852
Formamidinium and Cesium Hybridization for Photo‐ and Moisture‐Stable Perovskite Solar Cell
Lee, J., Kim, D., Kim, H., Seo, S., Cho, S. M., & Park, N. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501310 · Cited by 1,663
Bandgap‐Tunable Cesium Lead Halide Perovskites with High Thermal Stability for Efficient Solar Cells
Sutton, R. J., Eperon, G. E., Miranda, L., Parrott, E. S., Kamino, B. A., Patel, J. B., Hörantner, M. T., Johnston, M. B., Haghighirad, A. A., Moore, D. T., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502458 · Cited by 1,571
Cited by
Chemical stability and instability of inorganic halide perovskites
Zhou, Y., & Zhao, Y. (2019) · Energy & Environmental Science · doi:10.1039/c8ee03559h · Cited by 784
Bifunctional Stabilization of All-Inorganic α-CsPbI3 Perovskite for 17% Efficiency Photovoltaics
Wang, Y., Zhang, T., Kan, M., & Zhao, Y. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b07927 · Cited by 690
Self-citationSynthetic Approaches for Halide Perovskite Thin Films
Dunlap-Shohl, W. A., Zhou, Y., Padture, N. P., & Mitzi, D. B. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00318 · Cited by 631
Bao, C., Yang, J., Bai, S., Xu, W., Yan, Z., Xu, Q., Liu, J., Zhang, W., & Gao, F. (2018) · Advanced Materials · doi:10.1002/adma.201803422 · Cited by 567
Self-citationSwarnkar, A., Mir, W. J., & Nag, A. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.7b01197 · Cited by 554
Recent progress of inorganic perovskite solar cells
Tai, Q., Tang, K.-C., & Yan, F. (2019) · Energy & Environmental Science · doi:10.1039/c9ee01479a · Cited by 528
High‐Purity Inorganic Perovskite Films for Solar Cells with 9.72 % Efficiency
Duan, J., Zhao, Y., He, B., & Tang, Q. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201800019 · Cited by 514
Europium-Doped CsPbI2Br for Stable and Highly Efficient Inorganic Perovskite Solar Cells
Xiang, W., Wang, Z., Kubicki, D. J., Tress, W., Luo, J., Prochowicz, D., Akin, S., Emsley, L., Zhou, J., Dietler, G., et al. (2019) · Joule · doi:10.1016/j.joule.2018.10.008 · Cited by 460
Review on Recent Progress of All‐Inorganic Metal Halide Perovskites and Solar Cells
Xiang, W., & Tress, W. (2019) · Advanced Materials · doi:10.1002/adma.201902851 · Cited by 454
The high open-circuit voltage of perovskite solar cells: a review
Guo, Z., Jena, A. K., Kim, G. M., & Miyasaka, T. (2022) · Energy & Environmental Science · doi:10.1039/d2ee00663d · Cited by 430
Reduced-Dimensional α-CsPbX3 Perovskites for Efficient and Stable Photovoltaics
Jiang, Y., Yuan, J., Ni, Y., Yang, J., Wang, Y., Jiu, T., Yuan, M., & Chen, J. (2018) · Joule · doi:10.1016/j.joule.2018.05.004 · Cited by 429
Self-citationXiang, W., Liu, S. (., & Tress, W. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00157d · Cited by 386
Liu, F., Ding, C., Zhang, Y., Ripolles, T. S., Kamisaka, T., Toyoda, T., Hayase, S., Minemoto, T., Yoshino, K., Dai, S., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b08628 · Cited by 385
Inorganic Halide Perovskite Solar Cells: Progress and Challenges
Tian, J., Xue, Q., Yao, Q., Li, N., Brabec, C. J., & Yip, H. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000183 · Cited by 372
Graded Bandgap CsPbI2+Br1− Perovskite Solar Cells with a Stabilized Efficiency of 14.4%
Bian, H., Bai, D., Jin, Z., Wang, K., Liang, L., Wang, H., Zhang, J., Wang, Q., & Liu, S. (. (2018) · Joule · doi:10.1016/j.joule.2018.04.012 · Cited by 366
Self-citationEfficient α-CsPbI3 Photovoltaics with Surface Terminated Organic Cations
Wang, Y., Zhang, T., Kan, M., Li, Y., Wang, T., & Zhao, Y. (2018) · Joule · doi:10.1016/j.joule.2018.06.013 · Cited by 348
Self-citationDimensionality engineering of hybrid halide perovskite light absorbers
Gao, P., Bin Mohd Yusoff, A. R., & Nazeeruddin, M. K. (2018) · Nature Communications · doi:10.1038/s41467-018-07382-9 · Cited by 333
Precursor Engineering for All‐Inorganic CsPbI2Br Perovskite Solar Cells with 14.78% Efficiency
Yin, G., Zhao, H., Jiang, H., Yuan, S., Niu, T., Zhao, K., Liu, Z., & Liu, S. (. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201803269 · Cited by 330
Stability of all-inorganic perovskite solar cells
Ouedraogo, N. A. N., Chen, Y., Xiao, Y. Y., Meng, Q., Han, C. B., Yan, H., & Zhang, Y. (2020) · Nano Energy · doi:10.1016/j.nanoen.2019.104249 · Cited by 291
Low-temperature carbon-based electrodes in perovskite solar cells
Bogachuk, D., Zouhair, S., Wojciechowski, K., Yang, B., Babu, V., Wagner, L., Xu, B., Lim, J., Mastroianni, S., Pettersson, H., et al. (2020) · Energy & Environmental Science · doi:10.1039/d0ee02175j · Cited by 268
All-inorganic CsPbBr3 perovskite: a promising choice for photovoltaics
Ullah, S., Wang, J., Yang, P., Liu, L., Yang, S.-E., Xia, T., Guo, H., & Chen, Y. (2021) · Materials Advances · doi:10.1039/d0ma00866d · Cited by 261
NH4Cl‐Modified ZnO for High‐Performance CsPbIBr2 Perovskite Solar Cells via Low‐Temperature Process
Wang, H., Cao, S., Yang, B., Li, H., Wang, M., Hu, X., Sun, K., & Zang, Z. (2020) · Solar RRL · doi:10.1002/solr.201900363 · Cited by 260
Inorganic Hole Transporting Materials for Stable and High Efficiency Perovskite Solar Cells
Chen, J., & Park, N.-G. (2018) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.8b01177 · Cited by 255
Faheem, M. B., Khan, B., Feng, C., Farooq, M. U., Raziq, F., Xiao, Y., & Li, Y. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.9b02338 · Cited by 254
A Low-Cost and High-Efficiency Integrated Device toward Solar-Driven Water Splitting
Liang, J., Han, X., Qiu, Y., Fang, Q., Zhang, B., Wang, W., Zhang, J., Ajayan, P. M., & Lou, J. (2020) · ACS Nano · doi:10.1021/acsnano.9b09053 · Cited by 68
Self-citation
Metadata
- Authors
- Liang, J., Zhao, P., Wang, C., Wang, Y., Hu, Y., Zhu, G., Ma, L., Liu, J., & Jin, Z.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-10-03
- Volume
- 139
- Issue
- 40
- Pages
- 14009-14012
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2759839783
- Cited by
- 529
- References
- 29
- FWCI
- 28.31
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.