The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Bifunctional Stabilization of All-Inorganic α-CsPbI3 Perovskite for 17% Efficiency Photovoltaics
Abstract
The all-inorganic α-CsPbI 3 perovskite with the most suitable band gap faces serious challenges of low phase stability and high moisture sensitivity. We discover that a simple phenyltrimethylammonium bromide (PTABr) post-treatment could achieve a bifunctional stabilization including both gradient Br doping (or alloying) and surface passivation. The PTABr treatment on CsPbI 3 only induces less than 5 nm blue shift in UV–vis absorbance but significantly stabilize the perovskite phase with much better stability. Finally, the highly stable PTABr treated CsPbI 3 based perovskite solar cells exhibit a reproducible photovoltaic performance with a champion efficiency up to 17.06% and stable output of 16.3%. Therefore, this one-step bifunctional stabilization of perovskite through gradient halide doping and surface organic cation passivation presents a novel and promising strategy to design stable and high performance all-inorganic lead halide.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells
Yang, W. S., Park, B.-W., Jung, E. H., Jeon, N. J., Kim, Y. C., Lee, D. U., Shin, S. S., Seo, J., Kim, E. K., Noh, J. H., et al. (2017) · Science · doi:10.1126/science.aan2301 · Cited by 5,445
Quantum dot–induced phase stabilization of α-CsPbI 3 perovskite for high-efficiency photovoltaics
Swarnkar, A., Marshall, A. R., Sanehira, E. M., Chernomordik, B. D., Moore, D. T., Christians, J. A., Chakrabarti, T., & Luther, J. M. (2016) · Science · doi:10.1126/science.aag2700 · Cited by 2,794
Inorganic caesium lead iodide perovskite solar cells
Eperon, G. E., Paternò, G. M., Sutton, R. J., Zampetti, A., Haghighirad, A. A., Cacialli, F., & Snaith, H. J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta06398a · Cited by 1,852
Bandgap‐Tunable Cesium Lead Halide Perovskites with High Thermal Stability for Efficient Solar Cells
Sutton, R. J., Eperon, G. E., Miranda, L., Parrott, E. S., Kamino, B. A., Patel, J. B., Hörantner, M. T., Johnston, M. B., Haghighirad, A. A., Moore, D. T., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502458 · Cited by 1,571
Arora, N., Dar, M. I., Hinderhofer, A., Pellet, N., Schreiber, F., Zakeeruddin, S. M., & Grätzel, M. (2017) · Science · doi:10.1126/science.aam5655 · Cited by 1,546
Solution-Phase Synthesis of Cesium Lead Halide Perovskite Nanowires
Zhang, D., Eaton, S. W., Yu, Y., Dou, L., & Yang, P. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b05404 · Cited by 1,002
Enhanced mobility CsPbI 3 quantum dot arrays for record-efficiency, high-voltage photovoltaic cells
Sanehira, E. M., Marshall, A. R., Christians, J. A., Harvey, S. P., Ciesielski, P. N., Wheeler, L. M., Schulz, P., Lin, L. Y., Beard, M. C., & Luther, J. M. (2017) · Science Advances · doi:10.1126/sciadv.aao4204 · Cited by 977
Cited by
Halide Perovskite Photovoltaics: Background, Status, and Future Prospects
Jena, A. K., Kulkarni, A., & Miyasaka, T. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00539 · Cited by 3,087
High-Efficiency Perovskite Solar Cells
Kim, J. Y., Lee, J.-W., Jung, H. S., Shin, H., & Park, N.-G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00107 · Cited by 2,800
Understanding Degradation Mechanisms and Improving Stability of Perovskite Photovoltaics
Boyd, C. C., Cheacharoen, R., Leijtens, T., & McGehee, M. D. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00336 · Cited by 1,777
Chemical stability and instability of inorganic halide perovskites
Zhou, Y., & Zhao, Y. (2019) · Energy & Environmental Science · doi:10.1039/c8ee03559h · Cited by 784
Self-citationWang, J., Zhang, J., Zhou, Y., Liu, H., Xue, Q., Li, X., Chueh, C.-C., Yip, H.-L., Zhu, Z., & Jen, A. K. Y. (2020) · Nature Communications · doi:10.1038/s41467-019-13909-5 · Cited by 662
Thermal unequilibrium of strained black CsPbI 3 thin films
Steele, J. A., Jin, H., Dovgaliuk, I., Berger, R. F., Braeckevelt, T., Yuan, H., Martin, C., Solano, E., Lejaeghere, K., Rogge, S. M. J., et al. (2019) · Science · doi:10.1126/science.aax3878 · Cited by 661
Self-citationAdvances in two-dimensional organic–inorganic hybrid perovskites
Zhang, F., Lu, H., Tong, J., Berry, J. J., Beard, M. C., & Zhu, K. (2020) · Energy & Environmental Science · doi:10.1039/c9ee03757h · Cited by 627
The Role of Dimethylammonium Iodide in CsPbI3 Perovskite Fabrication: Additive or Dopant?
Wang, Y., Liu, X., Zhang, T., Wang, X., Kan, M., Shi, J., & Zhao, Y. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201910800 · Cited by 546
Self-citationSurface Passivation Using 2D Perovskites toward Efficient and Stable Perovskite Solar Cells
Wu, G., Liang, R., Ge, M., Sun, G., Zhang, Y., & Xing, G. (2022) · Advanced Materials · doi:10.1002/adma.202105635 · Cited by 531
Recent progress of inorganic perovskite solar cells
Tai, Q., Tang, K.-C., & Yan, F. (2019) · Energy & Environmental Science · doi:10.1039/c9ee01479a · Cited by 528
Review on Recent Progress of All‐Inorganic Metal Halide Perovskites and Solar Cells
Xiang, W., & Tress, W. (2019) · Advanced Materials · doi:10.1002/adma.201902851 · Cited by 454
The high open-circuit voltage of perovskite solar cells: a review
Guo, Z., Jena, A. K., Kim, G. M., & Miyasaka, T. (2022) · Energy & Environmental Science · doi:10.1039/d2ee00663d · Cited by 430
A Review on Additives for Halide Perovskite Solar Cells
Liu, S., Guan, Y., Sheng, Y., Hu, Y., Rong, Y., Mei, A., & Han, H. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201902492 · Cited by 425
Dual Interfacial Design for Efficient CsPbI2Br Perovskite Solar Cells with Improved Photostability
Tian, J., Xue, Q., Tang, X., Chen, Y., Li, N., Hu, Z., Shi, T., Wang, X., Huang, F., Brabec, C. J., et al. (2019) · Advanced Materials · doi:10.1002/adma.201901152 · Cited by 398
The surface of halide perovskites from nano to bulk
Xue, J., Wang, R., & Yang, Y. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0221-1 · Cited by 395
Xiang, W., Liu, S. (., & Tress, W. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00157d · Cited by 386
Inorganic Halide Perovskite Solar Cells: Progress and Challenges
Tian, J., Xue, Q., Yao, Q., Li, N., Brabec, C. J., & Yip, H. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000183 · Cited by 372
Accelerated aging of all-inorganic, interface-stabilized perovskite solar cells
Zhao, X., Liu, T., Burlingame, Q. C., Liu, T., Holley, R., Cheng, G., Yao, N., Gao, F., & Loo, Y.-L. (2022) · Science · doi:10.1126/science.abn5679 · Cited by 351
Gu, X., Xiang, W., Tian, Q., & Liu, S. (. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202109724 · Cited by 342
Mohd Yusoff, A. R. B., Vasilopoulou, M., Georgiadou, D. G., Palilis, L. C., Abate, A., & Nazeeruddin, M. K. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00062d · Cited by 327
Myths and reality of HPbI3 in halide perovskite solar cells
Ke, W., Spanopoulos, I., Stoumpos, C. C., & Kanatzidis, M. G. (2018) · Nature Communications · doi:10.1038/s41467-018-07204-y · Cited by 304
Short‐Chain Ligand‐Passivated Stable α‐CsPbI3 Quantum Dot for All‐Inorganic Perovskite Solar Cells
Chen, K., Zhong, Q., Chen, W., Sang, B., Wang, Y., Yang, T., Liu, Y., Zhang, Y., & Zhang, H. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900991 · Cited by 302
Self-citationPerovskite Solar Cells: Can We Go Organic‐Free, Lead‐Free, and Dopant‐Free?
Miyasaka, T., Kulkarni, A., Kim, G. M., Öz, S., & Jena, A. K. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201902500 · Cited by 293
High-Efficiency Silicon Heterojunction Solar Cells: Materials, Devices and Applications
Liu, Y., Li, Y., Wu, Y., Yang, G., Mazzarella, L., Procel-Moya, P., Tamboli, A. C., Weber, K., Boccard, M., Isabella, O., et al. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100579 · Cited by 293
Liu, Y., Ye, H., Zhang, Y., Zhao, K., Yang, Z., Yuan, Y., Wu, H., Zhao, G., Yang, Z., Tang, J., et al. (2019) · Matter · doi:10.1016/j.matt.2019.04.002 · Cited by 291
Tong, G., Chen, T., Li, H., Qiu, L., Liu, Z., Dang, Y., Song, W., Ono, L. K., Jiang, Y., & Qi, Y. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.104015 · Cited by 274
Bio-inspired vertebral design for scalable and flexible perovskite solar cells
Meng, X., Cai, Z., Zhang, Y., Hu, X., Xing, Z., Huang, Z., Huang, Z., Cui, Y., Hu, T., Su, M., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-16831-3 · Cited by 272
All-inorganic CsPbBr3 perovskite: a promising choice for photovoltaics
Ullah, S., Wang, J., Yang, P., Liu, L., Yang, S.-E., Xia, T., Guo, H., & Chen, Y. (2021) · Materials Advances · doi:10.1039/d0ma00866d · Cited by 261
NH4Cl‐Modified ZnO for High‐Performance CsPbIBr2 Perovskite Solar Cells via Low‐Temperature Process
Wang, H., Cao, S., Yang, B., Li, H., Wang, M., Hu, X., Sun, K., & Zang, Z. (2020) · Solar RRL · doi:10.1002/solr.201900363 · Cited by 260
Wu, T., Wang, Y., Dai, Z., Cui, D., Wang, T., Meng, X., Bi, E., Yang, X., & Han, L. (2019) · Advanced Materials · doi:10.1002/adma.201900605 · Cited by 257
Self-citationSolution‐Processable Perovskite Solar Cells toward Commercialization: Progress and Challenges
Wang, P., Wu, Y., Cai, B., Ma, Q., Zheng, X., & Zhang, W. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201807661 · Cited by 255
Faheem, M. B., Khan, B., Feng, C., Farooq, M. U., Raziq, F., Xiao, Y., & Li, Y. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.9b02338 · Cited by 254
Semitransparent Perovskite Solar Cells: From Materials and Devices to Applications
Shi, B., Duan, L., Zhao, Y., Luo, J., & Zhang, X. (2020) · Advanced Materials · doi:10.1002/adma.201806474 · Cited by 253
Self-citationFinding junction partners for CsPbI3 in a two-terminal tandem solar cell: A theoretical prospect
Meng, L., Wei, Z., Zuo, T., & Gao, P. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.104866 · Cited by 63
Liu, S., Wu, Z., He, Z., Chen, W., Zhong, X., Guo, B., Liu, S., Duan, H., Guo, Y., Zeng, J., et al. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c04398 · Cited by 34
Metadata
- Authors
- Wang, Y., Zhang, T., Kan, M., & Zhao, Y.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-09-24
- Volume
- 140
- Issue
- 39
- Pages
- 12345-12348
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2893566826
- Cited by
- 690
- References
- 31
- FWCI
- 36.88
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.