The DOI matches its Crossref record; 75 of the 75 references it cites were found in a registry or an index.
Effect of MnO2 Crystal Structure on Aerobic Oxidation of 5-Hydroxymethylfurfural to 2,5-Furandicarboxylic Acid
Abstract
Aerobic oxidation of 5-hydroxymethylfurfural (HMF) to 2,5-furandicarboxylic acid (FDCA) as a bioplastics monomer is efficiently promoted by a simple system based on a nonprecious-metal catalyst of MnO 2 and NaHCO 3 . Kinetic studies indicate that the oxidation of 5-formyl-2-furancarboxylic acid (FFCA) to FDCA is the slowest step for the aerobic oxidation of HMF to FDCA over activated MnO 2 . We demonstrate through combined computational and experimental studies that HMF oxidation to FDCA is largely dependent on the MnO 2 crystal structure. Density functional theory (DFT) calculations reveal that vacancy formation energies at the planar oxygen sites in α- and γ-MnO 2 are higher than those at the bent oxygen sites. β- and λ-MnO 2 consist of only planar and bent oxygen sites, respectively, with lower vacancy formation energies. Consequently, β- and λ-MnO 2 are likely to be good candidates as oxidation catalysts. On the other hand, experimental studies reveal that the reaction rates per surface area for the slowest step (FFCA oxidation to FDCA) decrease in the order of β-MnO 2 > λ-MnO 2 > γ-MnO 2 ≈ α-MnO 2 > δ-MnO 2 > ε-MnO 2; the catalytic activity of β-MnO 2 exceeds that of the previously reported activated MnO 2 by three times. The order is in good agreement not only with the DFT calculation results, but also with the reduction rates per surface area determined by the H 2 -temperature-programmed reduction measurements for MnO 2 catalysts. The successful synthesis of high-surface-area β-MnO 2 significantly improves the catalytic activity for the aerobic oxidation of HMF to FDCA.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Projector augmented-wave method
Blöchl, P. E. (1994) · Physical Review B · doi:10.1103/physrevb.50.17953 · Cited by 92,732
Ab initio molecular dynamics for liquid metals
Kresse, G., & Hafner, J. (1993) · Physical Review B · doi:10.1103/physrevb.47.558 · Cited by 45,727
VESTA 3 for three-dimensional visualization of crystal, volumetric and morphology data
Momma, K., & Izumi, F. (2011) · Journal of Applied Crystallography · doi:10.1107/s0021889811038970 · Cited by 26,054
Bozell, J. J., & Petersen, G. R. (2010) · Green Chemistry · doi:10.1039/b922014c · Cited by 4,566
Strongly Constrained and Appropriately Normed Semilocal Density Functional
Sun, J., Ruzsinszky, A., & Perdew, J. P. (2015) · Physical Review Letters · doi:10.1103/physrevlett.115.036402 · Cited by 3,596
Hydroxymethylfurfural, A Versatile Platform Chemical Made from Renewable Resources
van Putten, R.-J., van der Waal, J. C., de Jong, E., Rasrendra, C. B., Heeres, H. J., & de Vries, J. G. (2013) · Chemical Reviews · doi:10.1021/cr300182k · Cited by 2,886
Fully Ab Initio Finite-Size Corrections for Charged-Defect Supercell Calculations
Freysoldt, C., Neugebauer, J., & Van de Walle, C. G. (2009) · Physical Review Letters · doi:10.1103/physrevlett.102.016402 · Cited by 1,608
Effect of Crystallographic Structure of MnO 2 on Its Electrochemical Capacitance Properties
Devaraj, S., & Munichandraiah, N. (2008) · The Journal of Physical Chemistry C · doi:10.1021/jp7108785 · Cited by 1,385
Nesbitt, H. W., & Banerjee, D. (1998) · American Mineralogist · doi:10.2138/am-1998-3-414 · Cited by 1,207
Meng, Y., Song, W., Huang, H., Ren, Z., Chen, S.-Y., & Suib, S. L. (2014) · Journal of the American Chemical Society · doi:10.1021/ja505186m · Cited by 1,083
McFarland, E. W., & Metiu, H. (2013) · Chemical Reviews · doi:10.1021/cr300418s · Cited by 862
Nanostructured Mn-based oxides for electrochemical energy storage and conversion
Zhang, K., Han, X., Hu, Z., Zhang, X., Tao, Z., & Chen, J. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00218k · Cited by 859
Replacing fossil based PET with biobased PEF; process analysis, energy and GHG balance
Eerhart, A. J. J. E., Faaij, A. P. C., & Patel, M. K. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02480b · Cited by 666
Robinson, D. M., Go, Y. B., Mui, M., Gardner, G., Zhang, Z., Mastrogiovanni, D., Garfunkel, E., Li, J., Greenblatt, M., & Dismukes, G. C. (2013) · Journal of the American Chemical Society · doi:10.1021/ja310286h · Cited by 639
Catalytic decomposition of gaseous ozone over manganese dioxides with different crystal structures
Jia, J., Zhang, P., & Chen, L. (2016) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2016.02.055 · Cited by 605
Electrostatics-based finite-size corrections for first-principles point defect calculations
Kumagai, Y., & Oba, F. (2014) · Physical Review B · doi:10.1103/physrevb.89.195205 · Cited by 526
Self-citationCasanova, O., Iborra, S., & Corma, A. (2009) · ChemSusChem · doi:10.1002/cssc.200900137 · Cited by 524
Temperature Programmed Reduction
Hurst, N. W., Gentry, S. J., Jones, A. R., & McNicol, B. D. (1982) · Catalysis Reviews · doi:10.1080/03602458208079654 · Cited by 521
Xiao, W., Wang, D., & Lou, X. W. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp909386d · Cited by 475
A comparison study on Raman scattering properties of α- and β-MnO2
Gao, T., Fjellvåg, H., & Norby, P. (2009) · Analytica Chimica Acta · doi:10.1016/j.aca.2009.06.059 · Cited by 470
Xu, S., Zhou, P., Zhang, Z., Yang, C., Zhang, B., Deng, K., Bottle, S., & Zhu, H. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b08861 · Cited by 447
Gupta, N. K., Nishimura, S., Takagaki, A., & Ebitani, K. (2011) · Green Chemistry · doi:10.1039/c0gc00911c · Cited by 437
Davis, S. E., Zope, B. N., & Davis, R. J. (2012) · Green Chem. · doi:10.1039/c1gc16074e · Cited by 430
Electrosynthesis, functional, and structural characterization of a water-oxidizing manganese oxide
Zaharieva, I., Chernev, P., Risch, M., Klingan, K., Kohlhoff, M., Fischer, A., & Dau, H. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21191b · Cited by 417
Tang, Q., Jiang, L., Liu, J., Wang, S., & Sun, G. (2014) · ACS Catalysis · doi:10.1021/cs400938s · Cited by 362
Electronic Effect of Ruthenium Nanoparticles on Efficient Reductive Amination of Carbonyl Compounds
Komanoya, T., Kinemura, T., Kita, Y., Kamata, K., & Hara, M. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b04481 · Cited by 358
Self-citationInsight into the Effect of Oxygen Vacancy Concentration on the Catalytic Performance of MnO2
Li, L., Feng, X., Nie, Y., Chen, S., Shi, F., Xiong, K., Ding, W., Qi, X., Hu, J., Wei, Z., et al. (2015) · ACS Catalysis · doi:10.1021/acscatal.5b00320 · Cited by 348
Catalytic conversion of 5-hydroxymethylfurfural to some value-added derivatives
Kong, X., Zhu, Y., Fang, Z., Kozinski, J. A., Butler, I. S., Xu, L., Song, H., & Wei, X. (2018) · Green Chemistry · doi:10.1039/c8gc00234g · Cited by 306
Structure and Properties of Oxidative Dehydrogenation Catalysts Based on MoO3/Al2O3
Chen, K., Xie, S., Bell, A. T., & Iglesia, E. (2001) · Journal of Catalysis · doi:10.1006/jcat.2000.3125 · Cited by 289
Robinson, D. M., Go, Y. B., Greenblatt, M., & Dismukes, G. C. (2010) · Journal of the American Chemical Society · doi:10.1021/ja1055615 · Cited by 286
Base-free conversion of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid over a Ru/C catalyst
Yi, G., Teong, S. P., & Zhang, Y. (2016) · Green Chemistry · doi:10.1039/c5gc01584g · Cited by 262
Zhang, Z., Zhen, J., Liu, B., Lv, K., & Deng, K. (2015) · Green Chemistry · doi:10.1039/c4gc01833h · Cited by 261
Energetics ofMnO2polymorphs in density functional theory
Kitchaev, D. A., Peng, H., Liu, Y., Sun, J., Perdew, J. P., & Ceder, G. (2016) · Physical Review B · doi:10.1103/physrevb.93.045132 · Cited by 258
Ait Rass, H., Essayem, N., & Besson, M. (2013) · Green Chemistry · doi:10.1039/c3gc40727f · Cited by 254
Kim, N.-I., Sa, Y. J., Yoo, T. S., Choi, S. R., Afzal, R. A., Choi, T., Seo, Y.-S., Lee, K.-S., Hwang, J. Y., Choi, W. S., et al. (2018) · Science Advances · doi:10.1126/sciadv.aap9360 · Cited by 247
Xie, Y., Yu, Y., Gong, X., Guo, Y., Guo, Y., Wang, Y., & Lu, G. (2015) · CrystEngComm · doi:10.1039/c5ce00058k · Cited by 236
Cai, J., Ma, H., Zhang, J., Song, Q., Du, Z., Huang, Y., & Xu, J. (2013) · Chemistry – A European Journal · doi:10.1002/chem.201301735 · Cited by 228
Sun, M. B., Lan, B., Lin, T., Cheng, G., Ye, F., Yu, L., Cheng, X., & Zheng, X. (2013) · CrystEngComm · doi:10.1039/c3ce40603b · Cited by 227
Kim, M., Su, Y., Fukuoka, A., Hensen, E. J. M., & Nakajima, K. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201805457 · Cited by 226
Rutile-type compounds. V. Refinement of MnO2 and MgF2
Baur, W. H. (1976) · Acta Crystallographica Section B Structural Crystallography and Crystal Chemistry · doi:10.1107/s0567740876007371 · Cited by 224
Rutile (β-)MnO2 Surfaces and Vacancy Formation for High Electrochemical and Catalytic Performance
Tompsett, D. A., Parker, S. C., & Islam, M. S. (2014) · Journal of the American Chemical Society · doi:10.1021/ja4092962 · Cited by 222
Han, X., Li, C., Liu, X., Xia, Q., & Wang, Y. (2017) · Green Chemistry · doi:10.1039/c6gc03304k · Cited by 210
Saha, B., Gupta, D., Abu-Omar, M. M., Modak, A., & Bhaumik, A. (2013) · Journal of Catalysis · doi:10.1016/j.jcat.2012.12.024 · Cited by 207
Liu, B., Ren, Y., & Zhang, Z. (2015) · Green Chemistry · doi:10.1039/c4gc02019g · Cited by 200
Smith, P. F., Deibert, B. J., Kaushik, S., Gardner, G., Hwang, S., Wang, H., Al-Sharab, J. F., Garfunkel, E., Fabris, L., Li, J., et al. (2016) · ACS Catalysis · doi:10.1021/acscatal.6b00099 · Cited by 199
Mishra, D. K., Lee, H. J., Kim, J., Lee, H.-S., Cho, J. K., Suh, Y.-W., Yi, Y., & Kim, Y. J. (2017) · Green Chemistry · doi:10.1039/c7gc00027h · Cited by 198
Hayashi, E., Komanoya, T., Kamata, K., & Hara, M. (2017) · ChemSusChem · doi:10.1002/cssc.201601443 · Cited by 183
Self-citationA high-efficiency γ-MnO 2 -like catalyst in toluene combustion
Si, W., Wang, Y., Peng, Y., et al. (2015) · Chemical Communications · doi:10.1039/c5cc04528b · Cited by 177
Han, X., Geng, L., Guo, Y., Jia, R., Liu, X., Zhang, Y., & Wang, Y. (2016) · Green Chemistry · doi:10.1039/c5gc02114f · Cited by 169
Nguyên, C. V., Liao, Y., Kang, T.-C., Chen, J. E., Yoshikawa, T., Nakasaka, Y., Masuda, T., & Wu, K. C. ‐. (2016) · Green Chemistry · doi:10.1039/c6gc02118b · Cited by 157
Nie, J., & Liu, H. (2014) · Journal of Catalysis · doi:10.1016/j.jcat.2014.05.003 · Cited by 153
Selective oxidation of 5-hydroxymethyl furfural over non-precious metal heterogeneous catalysts
Neațu, F., Marin, R. S., Florea, M., Petrea, N., Pavel, O. D., & Parvulescu, V. I. (2015) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2015.07.043 · Cited by 143
Artz, J., & Palkovits, R. (2015) · ChemSusChem · doi:10.1002/cssc.201501106 · Cited by 140
Zhou, C., Deng, W., Wan, X., Zhang, Q., Yang, Y., & Wang, Y. (2015) · ChemCatChem · doi:10.1002/cctc.201500352 · Cited by 140
Hara, M., Nakajima, K., & Kamata, K. (2015) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/16/3/034903 · Cited by 139
Self-citationOxygen stoichiometry and structural properties of La1 – xAxMnO3 ± δ (A = Ca or Sr and 0 ≤ x ≤ 1)
Rørmark, L., Wiik, K., Stølen, S., & Grande, T. (2002) · Journal of Materials Chemistry · doi:10.1039/b103510j · Cited by 130
Fe–Zr–O catalyzed base-free aerobic oxidation of 5-HMF to 2,5-FDCA as a bio-based polyester monomer
Yan, D., Xin, J., Zhao, Q. Y., Gao, K., Lü, X., Wang, G., & Zhang, S. (2017) · Catalysis Science & Technology · doi:10.1039/c7cy01704a · Cited by 116
Yang, Z., Qi, W. D., Su, R., & He, Z. (2016) · Energy & Fuels · doi:10.1021/acs.energyfuels.6b02012 · Cited by 107
A bifunctional cerium phosphate catalyst for chemoselective acetalization
Kanai, S., Nagahara, I., Kita, Y., Kamata, K., & Hara, M. (2017) · Chemical Science · doi:10.1039/c6sc05642c · Cited by 95
Self-citationHeat resistance of new biobased polymeric materials, focusing on starch, cellulose, PLA , and PHA
Peelman, N., Ragaert, P., Ragaert, K., Meulenaer, B. D., Devlieghere, F., & Cardon, L. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42305 · Cited by 89
Jain, A., Jonnalagadda, S. C., Ramanujachary, K. V., & Mugweru, A. M. (2014) · Catalysis Communications · doi:10.1016/j.catcom.2014.09.017 · Cited by 88
Gawade, A. B., Nakhate, A. V., & Yadav, G. D. (2017) · Catalysis Today · doi:10.1016/j.cattod.2017.08.061 · Cited by 88
Intensification of TEMPO-mediated aerobic alcohol oxidations under three-phase flow conditions
Aellig, C., Scholz, D., Conrad, S., & Hermans, I. (2013) · Green Chemistry · doi:10.1039/c3gc40159f · Cited by 80
Chen, C., Nguyên, C. V., Wang, Z., Bando, Y., Yamauchi, Y., Bazziz, M. T. S., Fatehmulla, A., Farooq, W. A., Yoshikawa, T., Masuda, T., et al. (2017) · ChemCatChem · doi:10.1002/cctc.201701302 · Cited by 76
Ventura, M. J., Nocito, F., Giglio, E. D., Cometa, S., Altomare, A., & Dibenedetto, A. (2018) · Green Chemistry · doi:10.1039/c8gc00972d · Cited by 72
Liu, H. (2003) · Journal of Catalysis · doi:10.1016/s0021-9517(03)00025-3 · Cited by 71
Heterogeneously Catalyzed Aerobic Oxidation of Sulfides with a BaRuO3 Nanoperovskite
Kamata, K., Sugahara, K., Kato, Y., Muratsugu, S., Kumagai, Y., Oba, F., & Hara, M. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b05343 · Cited by 68
Self-citationCheng, G., Xie, S., Lan, B., Zheng, X., Ye, F., Sun, M. B., Lu, X., & Yu, L. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta04530h · Cited by 61
Revathi, C., & Kumar, R. T. R. (2017) · Electroanalysis · doi:10.1002/elan.201600608 · Cited by 61
Yu, K. M. K., Liu, Y., Lei, D., Jiang, Y., Wang, Y., Feng, Y., Lou, L., Liu, S., & Zhou, W. (2018) · Catalysis Science & Technology · doi:10.1039/c7cy02455j · Cited by 60
Nie, J., & Liu, H. (2011) · Pure and Applied Chemistry · doi:10.1351/pac-con-11-07-02 · Cited by 57
Li, K., Chen, J., Peng, Y., Lin, W., Yan, T., & Li, J. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta04624c · Cited by 50
Dawson, J. A., & Tanaka, I. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am504351p · Cited by 48
Shen, J., Chen, H., Chen, K., Qin, Y. H., Lü, X., Ouyang, P., & Fu, J. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.7b05101 · Cited by 45
Structure and Stability of Hydrated β-MnO2 Surfaces
Oxford, G. A. E., & Chaka, A. M. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp302268m · Cited by 42
Cited by
Catalytic Production of Value-Added Chemicals and Liquid Fuels from Lignocellulosic Biomass
Jing, Y., Guo, Y., Xia, Q., Liu, X., & Wang, Y. (2019) · Chem · doi:10.1016/j.chempr.2019.05.022 · Cited by 558
Yang, Y., & Mu, T. (2021) · Green Chemistry · doi:10.1039/d1gc00914a · Cited by 539
Oxygen vacancies in metal oxides: recent progress towards advanced catalyst design
Zhuang, G., Chen, Y., Zhuang, Z., Yu, Y., & Yu, J. (2020) · Science China Materials · doi:10.1007/s40843-020-1305-6 · Cited by 499
MnO2‐Based Materials for Environmental Applications
Yang, R., Fan, Y., Ye, R., Tang, Y., Cao, X., Yin, Z., & Zeng, Z. (2021) · Advanced Materials · doi:10.1002/adma.202004862 · Cited by 461
Circumventing Challenges: Design of Anodic Electrocatalysts for Hybrid Water Electrolysis Systems
Wang, H., Sun, M., Ren, J., & Yuan, Z. (2023) · Advanced Energy Materials · doi:10.1002/aenm.202203568 · Cited by 183
Metadata
- Authors
- Hayashi, E., Yamaguchi, Y., Kamata, K., Tsunoda, N., Kumagai, Y., Oba, F., & Hara, M.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-01-07
- Volume
- 141
- Issue
- 2
- Pages
- 890-900
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2906742176
- Cited by
- 483
- References
- 75
- FWCI
- 18.49
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.