The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
High-Performance n-Type PbSe–Cu2Se Thermoelectrics through Conduction Band Engineering and Phonon Softening
Abstract
From a structural and economic perspective, tellurium-free PbSe can be an attractive alternative to its more expensive isostructural analogue of PbTe for intermediate temperature power generation. Here we report that PbSe 0.998 Br 0.002 -2%Cu 2 Se exhibits record high peak ZT 1.8 at 723 K and average ZT 1.1 between 300 and 823 K to date for all previously reported n- and p-type PbSe-based materials as well as tellurium-free n-type polycrystalline materials. These even rival the highest reported values for n-type PbTe-based materials. Cu 2 Se doping not only enhance charge transport properties but also depress thermal conductivity of n-type PbSe. It flattens the edge of the conduction band of PbSe, increases the effective mass of charge carriers, and enlarges the energy band gap, which collectively improve the Seebeck coefficient markedly. This is the first example of manipulating the electronic conduction band to enhance the thermoelectric properties of n-type PbSe. Concurrently, Cu 2 Se increases the carrier concentration with nearly no loss in carrier mobility, even increasing the electrical conductivity above ∼423 K. The resulting power factor is ultrahigh, reaching ∼21–26 μW cm –1 K –2 over a wide range of temperature from ∼423 to 723 K. Cu 2 Se doping substantially reduces the lattice thermal conductivity to ∼0.4 W m –1 K –1 at 773 K, approaching its theoretical amorphous limit. According to first-principles calculations, the achieved ultralow value can be attributed to remarkable acoustic phonon softening at the low-frequency region.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Shannon, R. D. (1976) · Acta Crystallographica Section A · doi:10.1107/s0567739476001551 · Cited by 66,145
High-Performance Flexible Thermoelectric Power Generator Using Laser Multiscanning Lift-Off Process
Kim, S. J., Lee, H. E., Choi, H., Kim, Y., We, J. H., Shin, J. S., Lee, K. J., & Cho, B. J. (2016) · ACS Nano · doi:10.1021/acsnano.6b05004 · Cited by 257
Cited by
Review of current high-ZT thermoelectric materials
Wei, J., Yang, L., Ma, Z., Song, P., Zhang, M., Ma, J., Yang, F., & Wang, X. (2020) · Journal of Materials Science · doi:10.1007/s10853-020-04949-0 · Cited by 413
Chalcogenide Thermoelectrics Empowered by an Unconventional Bonding Mechanism
Yu, Y., Cagnoni, M., Cojocaru‐Mirédin, O., & Wuttig, M. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201904862 · Cited by 272
Self-citation
Metadata
- Authors
- Zhou, C., Yu, Y., Lee, Y. K., Cojocaru-Mirédin, O., Yoo, B., Cho, S.-P., Im, J., Wuttig, M., Hyeon, T., & Chung, I.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-10-22
- Volume
- 140
- Issue
- 45
- Pages
- 15535-15545
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2895813839
- Cited by
- 163
- References
- 2
- FWCI
- 4.97
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.