The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
Two-Dimensional Dion–Jacobson Hybrid Lead Iodide Perovskites with Aromatic Diammonium Cations
Open accessAbstract
Two-dimensional (2D) halide perovskites have extraordinary optoelectronic properties and structural tunability. Among them, the Dion–Jacobson phases with the inorganic layers stacking exactly on top of each other are less explored. Herein, we present the new series of 2D Dion–Jacobson halide perovskites, which adopt the general formula of A′A n –1 Pb n I 3 n +1 (A′ = 4-(aminomethyl)pyridinium (4AMPY), A = methylammonium (MA), n = 1–4). By modifying the position of the CH 2 NH 3 + group from 4AMPY to 3AMPY (3AMPY = 3-(aminomethyl)pyridinium), the stacking of the inorganic layers changes from exactly eclipsed to slightly offset. The perovskite octahedra tilts are also different between the two series, with the 3AMPY series exhibiting smaller bandgaps than the 4AMPY series. Compared to the aliphatic cation of the same size (AMP = (aminomethyl)piperidinium), the aromatic spacers increase the rigidity of the cation, reduce the interlayer spacing, and decrease the dielectric mismatch between inorganic layer and the organic spacer, showing the indirect but powerful influence of the organic cations on the structure and consequently on the optical properties of the perovskite materials. All A′A n –1 Pb n I 3 n +1 compounds exhibit strong photoluminescence (PL) at room temperature. Preliminary solar cell devices based on the n = 4 perovskites as absorbers of both series exhibit promising performances, with a champion power conversion efficiency (PCE) of 9.20% for (3AMPY)(MA) 3 Pb 4 I 13 -based devices, which is higher than the (4AMPY)(MA) 3 Pb 4 I 13 and the corresponding aliphatic analogue (3AMP)(MA) 3 Pb 4 I 13 -based ones.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Structure validation in chemical crystallography
Spek, A. L. (2009) · Acta Crystallographica Section D Biological Crystallography · doi:10.1107/s090744490804362x · Cited by 15,432
Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells
Yang, W. S., Park, B.-W., Jung, E. H., Jeon, N. J., Kim, Y. C., Lee, D. U., Shin, S. S., Seo, J., Kim, E. K., Noh, J. H., et al. (2017) · Science · doi:10.1126/science.aan2301 · Cited by 5,445
Crystallographic Computing System JANA2006: General features
Petříček, V., Dušek, M., & Palatinus, L. (2014) · Zeitschrift für Kristallographie - Crystalline Materials · doi:10.1515/zkri-2014-1737 · Cited by 4,802
A critical account on π–π stacking in metal complexes with aromatic nitrogen-containing ligands †
Janiak, C. (2000) · Journal of the Chemical Society, Dalton Transactions · doi:10.1039/b003010o · Cited by 4,511
High-efficiency two-dimensional Ruddlesden–Popper perovskite solar cells
Tsai, H., Nie, W., Blancon, J.-C., Stoumpos, C. C., Asadpour, R., Harutyunyan, B., Neukirch, A. J., Verduzco, R., Crochet, J. J., Tretiak, S., et al. (2016) · Nature · doi:10.1038/nature18306 · Cited by 3,384
Self-citationPerovskite light-emitting diodes with external quantum efficiency exceeding 20 per cent
Lin, K., Xing, J., Quan, L. N., de Arquer, F. P. G., Gong, X., Lu, J., Xie, L., Zhao, W., Zhang, D., Yan, C., et al. (2018) · Nature · doi:10.1038/s41586-018-0575-3 · Cited by 3,355
Organic–Inorganic Perovskites: Structural Versatility for Functional Materials Design
Saparov, B., & Mitzi, D. B. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00715 · Cited by 2,907
Lead halide perovskite nanowire lasers with low lasing thresholds and high quality factors
Zhu, H., Fu, Y., Meng, F., Wu, X., Gong, Z., Ding, Q., Gustafsson, M. V., Trinh, M. T., Jin, S., & Zhu, X.-Y. (2015) · Nature Materials · doi:10.1038/nmat4271 · Cited by 2,836
Perovskite energy funnels for efficient light-emitting diodes
Yuan, M., Quan, L. N., Comin, R., Walters, G., Sabatini, R., Voznyy, O., Hoogland, S., Zhao, Y., Beauregard, E. M., Kanjanaboos, P., et al. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2016.110 · Cited by 2,325
2D Homologous Perovskites as Light-Absorbing Materials for Solar Cell Applications
Cao, D. H., Stoumpos, C. C., Farha, O. K., Hupp, J. T., & Kanatzidis, M. G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b03796 · Cited by 2,158
Self-citation
Cited by
Li, X., Hoffman, J. M., & Kanatzidis, M. G. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01006 · Cited by 1,085
Self-citationReducing the impact of Auger recombination in quasi-2D perovskite light-emitting diodes
Jiang, Y., Cui, M., Li, S., Sun, C., Huang, Y., Wei, J., Zhang, L., Lv, M., Qin, C., Liu, Y., et al. (2021) · Nature Communications · doi:10.1038/s41467-020-20555-9 · Cited by 469
Lyu, R., Moore, C. E., Liu, T., Yu, Y., & Wu, Y. (2021) · Journal of the American Chemical Society · doi:10.1021/jacs.1c05441 · Cited by 114
Metadata
- Authors
- Li, X., Ke, W., Traoré, B., Guo, P., Hadar, I., Kepenekian, M., Even, J., Katan, C., Stoumpos, C. C., Schaller, R. D., & Kanatzidis, M. G.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-07-17
- Volume
- 141
- Issue
- 32
- Pages
- 12880-12890
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2961458288
- Cited by
- 386
- References
- 45
- FWCI
- 14.63
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Two-Dimensional Dion–Jacobson Hybrid Lead Iodide Perovskites with Aromatic Diammonium Cations. https://app.cochat.ai/papers/10.1021/jacs.9b06398
- The paper
- Li, X., Ke, W., Traoré, B., Guo, P., Hadar, I., Kepenekian, M., Even, J., Katan, C., Stoumpos, C. C., Schaller, R. D., & Kanatzidis, M. G. (2019). Two-Dimensional Dion–Jacobson Hybrid Lead Iodide Perovskites with Aromatic Diammonium Cations. Journal of the American Chemical Society. https://doi.org/10.1021/jacs.9b06398
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.