The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
High Efficiency Mesoscopic Solar Cells Using CsPbI3 Perovskite Quantum Dots Enabled by Chemical Interface Engineering
Open accessAbstract
All-inorganic α-CsPbI 3 perovskite quantum dots (QDs) are attracting great interest as solar cell absorbers due to their appealing light harvesting properties and enhanced stability due to the absence of volatile organic constituents. Moreover, ex situ synthesized QDs significantly reduce the variability of the perovskite layer deposition process. However, the incorporation of α-CsPbI 3 QDs into mesoporous TiO 2 (m-TiO 2 ) is highly challenging, but these constitute the best performing electron transport materials in state-of-the-art perovskite solar cells. Herein, the m-TiO 2 surface is engineered using an electron-rich cesium-ion containing methyl acetate solution. As one effect of this treatment, the solid–liquid interfacial tension at the TiO 2 surface is reduced and the wettability is improved, facilitating the migration of the QDs into m-TiO 2 . As a second effect, Cs + ions passivate the QD surface and promote the charge transfer at the m-TiO 2 /QD interface, leading to an enhancement of the electron injection rate by a factor of 3. In combination with an ethanol-environment smoothing route that significantly reduces the surface roughness of the m-TiO 2 /QD layer, optimized devices exhibit highly reproducible power conversion efficiencies exceeding 13%. The best cell with an efficiency of 14.32% (reverse scan) reaches a short-circuit current density of 17.77 mA cm –2, which is an outstanding value for QD-based perovskite solar cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Strongly emissive perovskite nanocrystal inks for high-voltage solar cells
Akkerman, Q. A., Gandini, M., Di Stasio, F., Rastogi, P., Palazon, F., Bertoni, G., Ball, J. M., Prato, M., Petrozza, A., & Manna, L. (2016) · Nature Energy · doi:10.1038/nenergy.2016.194 · Cited by 721
Cited by
Flexible and efficient perovskite quantum dot solar cells via hybrid interfacial architecture
Hu, L., Zhao, Q., Huang, S., Zheng, J., Guan, X., Patterson, R., Kim, J., Shi, L., Lin, C.-H., Lei, Q., et al. (2021) · Nature Communications · doi:10.1038/s41467-020-20749-1 · Cited by 368
Stabilization of Black Perovskite Phase in FAPbI3 and CsPbI3
Masi, S., Gualdrón-Reyes, A. F., & Mora-Seró, I. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c00801 · Cited by 347
Metal Halide Perovskites in Quantum Dot Solar Cells: Progress and Prospects
Yuan, J., Hazarika, A., Zhao, Q., Ling, X., Moot, T., Ma, W., & Luther, J. M. (2020) · Joule · doi:10.1016/j.joule.2020.04.006 · Cited by 307
Metadata
- Authors
- Chen, K., Jin, W., Zhang, Y., Yang, T., Reiss, P., Zhong, Q., Bach, U., Li, Q., Wang, Y., Zhang, H., Bao, Q., & Liu, Y.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-01-22
- Volume
- 142
- Issue
- 8
- Pages
- 3775-3783
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W3002109393
- Cited by
- 213
- References
- 1
- FWCI
- 12.91
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.