The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Tailoring Pore Properties of MCM-48 Silica for Selective Adsorption of CO2
Abstract
Four different types of amine-attached MCM-48 silicas were prepared and investigated for CO(2) separation from N(2). Monomeric and polymeric hindered and unhindered amines were attached to the pore surface of the MCM-48 silica and characterized with respect to their CO(2) sorption properties. The pore structures and amino group content in these modified silicas were investigated by XRD, FT-IR, TGA, N(2) adsorption/desorption at 77 K and CHN/Si analysis, which confirmed that in all cases the amino groups were attached to the pore surface of MCM-48 at 1.5-5.2 mmol/g. The N(2) adsorption/desorption analysis showed a considerable decrease of the pore volume and surface area for the MCM-48 silica containing a polymeric amine (e.g., polyethyleneimine). The CO(2) adsorption rates and capacities of the amine-attached MCM-48 samples were studied employing a sorption microbalance. The results obtained indicated that in addition to the concentration of surface-attached amino groups, specific interactions between CO(2) and the surface amino groups, and the resultant pore structure after amine group attachment have a significant impact on CO(2) adsorption properties of these promising adsorbent materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorption Equilibrium of Methane, Carbon Dioxide, and Nitrogen on Zeolite 13X at High Pressures
Cavenati, S., Grande, C. A., & Rodrigues, A. E. (2004) · Journal of Chemical & Engineering Data · doi:10.1021/je0498917 · Cited by 1,147
Xu, X., Song, C., Andresen, J. M., Miller, B. G., & Scaroni, A. W. (2002) · Energy & Fuels · doi:10.1021/ef020058u · Cited by 1,097
Adsorption of CO2 on Molecular Sieves and Activated Carbon
Siriwardane, R. V., Shen, M.-S., Fisher, E. P., & Poston, J. A. (2001) · Energy & Fuels · doi:10.1021/ef000241s · Cited by 943
Xu, X., Song, C., Andrésen, J. M., Miller, B. G., & Scaroni, A. W. (2003) · Microporous and Mesoporous Materials · doi:10.1016/s1387-1811(03)00388-3 · Cited by 769
Amine-Grafted MCM-48 and Silica Xerogel as Superior Sorbents for Acidic Gas Removal from Natural Gas
Huang, H. Y., Yang, R. T., Chinn, D., & Munson, C. L. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie020440u · Cited by 713
Comprehensive Study of Surface Chemistry of MCM-41 Using29Si CP/MAS NMR, FTIR, Pyridine-TPD, and TGA
Zhao, X. S., Lu, G. Q., Whittaker, A. K., Millar, G. J., & Zhu, H. Y. (1997) · The Journal of Physical Chemistry B · doi:10.1021/jp971366+ · Cited by 708
Mercier, L., & Pinnavaia, T. J. (1998) · Environmental Science & Technology · doi:10.1021/es970622t · Cited by 460
Adsorption of Chromate and Arsenate by Amino-Functionalized MCM-41 and SBA-1
Yoshitake, H., Yokoi, T., & Tatsumi, T. (2002) · Chemistry of Materials · doi:10.1021/cm0202355 · Cited by 392
In-Situ Infrared Study of CO2 Adsorption on SBA-15 Grafted with γ-(Aminopropyl)triethoxysilane
Chang, A. C. C., Chuang, S. S. C., Gray, M., & Soong, Y. (2003) · Energy & Fuels · doi:10.1021/ef020176h · Cited by 389
Equilibria and kinetics of CO2 adsorption on hydrotalcite adsorbent
Ding, Y., & Alpay, E. (2000) · Chemical Engineering Science · doi:10.1016/s0009-2509(99)00596-5 · Cited by 362
MCM-41, MCM-48 and related mesoporous adsorbents: their synthesis and characterisation
Kumar, D., Schumacher, K., du Fresne von Hohenesche, C., Grün, M., & Unger, K. K. (2001) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/s0927-7757(01)00638-0 · Cited by 300
Tailoring Surface and Structural Properties of MCM-41 Silicas by Bonding Organosilanes
Jaroniec, C. P., Kruk, M., Jaroniec, M., & Sayari, A. (1998) · The Journal of Physical Chemistry B · doi:10.1021/jp981304z · Cited by 281
Design and Synthesis of Selective Mesoporous Anion Traps
Fryxell, G. E., Liu, J., Hauser, T. A., Nie, Z., Ferris, K. F., Mattigod, S., Gong, M., & Hallen, R. T. (1999) · Chemistry of Materials · doi:10.1021/cm990104c · Cited by 240
Hughes, R. W., Lu, D., Anthony, E. J., & Wu, Y. (2004) · Industrial & Engineering Chemistry Research · doi:10.1021/ie034260b · Cited by 233
Carbon Dioxide Capture Using Dry Sodium-Based Sorbents
Liang, Y., Harrison, D. P., Gupta, R. P., Green, D. A., & McMichael, W. J. (2004) · Energy & Fuels · doi:10.1021/ef030158f · Cited by 212
Pressure swing adsorption for carbon dioxide sequestration from exhaust gases
Gomes, V. G., & Yee, K. W. K. (2002) · Separation and Purification Technology · doi:10.1016/s1383-5866(02)00064-3 · Cited by 209
Adsorption of Carbon Dioxide on Amine Modified SBA-15 in the Presence of Water Vapor
Hiyoshi, N., Yogo, K., & Yashima, T. (2004) · Chemistry Letters · doi:10.1246/cl.2004.510 · Cited by 189
High-Temperature Sorbents for CO2 Made of Alkali Metals Doped on CaO Supports
Reddy, E. P., & Smirniotis, P. G. (2004) · The Journal of Physical Chemistry B · doi:10.1021/jp031245b · Cited by 176
Na, B.-K., Lee, H., Koo, K., & Song, H. K. (2002) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0109509 · Cited by 94
Synthesis of Periodic Mesoporous Silica Thin Films
Martin, J. E., Anderson, M. T., Odinek, J. G., & Newcomer, P. P. (1997) · Langmuir · doi:10.1021/la960714g · Cited by 90
CO2 Adsorption over Si-MCM-41 Materials Having Basic Sites Created by Postmodification with La2O3
Shen, S., Chen, X., & Kawi, S. (2004) · Langmuir · doi:10.1021/la049947v · Cited by 69
Base-functionalized MCM-41 as catalysts for the synthesis of monoglycerides
Lin, X. H., Chuah, G., & Jaenicke, S. (1999) · Journal of Molecular Catalysis A Chemical · doi:10.1016/s1381-1169(99)00230-7 · Cited by 63
Adsorption of carbon dioxide on the chemically modified silica adsorbents
Song, H., Cho, K. W., & Lee, K. (1998) · Journal of Non-Crystalline Solids · doi:10.1016/s0022-3093(98)00793-5 · Cited by 38
Cited by
Nanotechnology for Environmental Remediation: Materials and Applications
Guerra, F. D., Attia, M. F., Whitehead, D. C., & Alexis, F. (2018) · Molecules · doi:10.3390/molecules23071760 · Cited by 787
Hicks, J. C., Drese, J. H., Fauth, D. J., Gray, M. L., Qi, G., & Jones, C. W. (2008) · Journal of the American Chemical Society · doi:10.1021/ja077795v · Cited by 758
Carbon dioxide utilization with C–N bond formation: carbon dioxide capture and subsequent conversion
Yang, Z.-Z., He, L.-N., Gao, J., Liu, A.-H., & Yu, B. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02774g · Cited by 520
Amine-modified ordered mesoporous silica: Effect of pore size on carbon dioxide capture
Zeleňák, V., Badaničová, M., Halamová, D., Čejka, J., Zukal, A., Murafa, N., & Goerigk, G. (2008) · Chemical Engineering Journal · doi:10.1016/j.cej.2008.07.025 · Cited by 395
A review of N-functionalized solid adsorbents for post-combustion CO2 capture
Hu, X. (., Liu, L., Luo, X., Xiao, G., Shiko, E., Zhang, R., Fan, X., Zhou, Y., Liu, Y., Zeng, Z., et al. (2020) · Applied Energy · doi:10.1016/j.apenergy.2019.114244 · Cited by 282
Metadata
- Authors
- Kim, S., Ida, J., Guliants, V. V., & Lin, Y. S.
- Venue
- The Journal of Physical Chemistry B
- Publisher
- American Chemical Society (ACS)
- Published
- 2005-03-11
- Volume
- 109
- Issue
- 13
- Pages
- 6287-6293
- ISSN
- 1520-5207 (ISSN-L)
- 1520-6106
- OpenAlex
- W2036211981
- Cited by
- 332
- References
- 23
- FWCI
- 24.29
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
