The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Structure and Electrocatalytic Activity of Carbon-Supported Pt−Ni Alloy Nanoparticles Toward the Oxygen Reduction Reaction
Abstract
Vulcan XC-72 carbon-supported Pt−Ni alloy nanoparticle catalysts with different Pt/Ni atomic composition were prepared via the carbonyl complex route and their structure was studied by X-ray diffraction spectroscopy at wide angles (WAXS) and Debye function analysis (DFA). The very good agreement between the WAXS pattern and DFA simulation revealed that all the as-prepared Pt−Ni alloy catalysts have a unique and highly disordered face-centered cubic structure (solid solution) and that the lattice parameter decreases with the increase of the Ni content in the alloys. Transmission electron microscopy (TEM) images indicated that the as-prepared Pt−Ni alloy nanoparticles were well dispersed on the surface of the carbon support with a narrow particle size distribution and that their mean particle size slightly decreased with the increase in Ni content. Energy-dispersive X-ray analysis (EDX) confirmed that the catalyst composition was nearly the same as that of the nominal value. Thus, a comparative study was made for the oxygen reduction reaction (ORR) using the thin-film rotating ring-disk electrode method to the behavior of Pt based catalysts on the same carbon support, having the same metal loading, the same disordered structure, and a similar particle size. As compared to the Pt/C catalyst, the bimetallic catalysts with different Pt/ Ni atomic ratios exhibited an enhancement factor of ca. 1.5 to 3 in the mass activity and of ca. 1.5 to 4 in the specific activity for the ORR and a lower production of hydrogen peroxide in pure perchloric acid solution. The maximum activity of the Pt-based catalysts was found with ca. 30 ∼ 40 at. % Ni content in the alloys, which could originate from the favorable Pt−Pt interatomic distance. The ring-current measurements on all the catalysts showed similar behavior for hydrogen peroxide production. The enhanced electrocatalytic activity of as-prepared Pt−Ni alloy catalysts for the ORR is attributed to the high dispersion of the alloy catalysts, to their disordered structure, and to the favorable Pt−Pt mean interatomic distance caused by alloying.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Surface science studies of model fuel cell electrocatalysts
Markovic, N. (2002) · Surface Science Reports · doi:10.1016/s0167-5729(01)00022-x · Cited by 2,143
DMFCs: From Fundamental Aspects to Technology Development
Aricò, A. S., Srinivasan, S., & Antonucci, V. (2001) · Fuel Cells · doi:10.1002/1615-6854(200107)1:2<133::aid-fuce133>3.0.co;2-5 · Cited by 1,464
Enhancement of the Electroreduction of Oxygen on Pt Alloys with Fe, Ni, and Co
Toda, T., Igarashi, H., Uchida, H., & Watanabe, M. (1999) · Journal of The Electrochemical Society · doi:10.1149/1.1392544 · Cited by 1,336
Mukerjee, S., Srinivasan, S., Soriaga, M. P., & McBreen, J. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2048590 · Cited by 1,155
Oxygen Reduction on Carbon-Supported Pt−Ni and Pt−Co Alloy Catalysts
Paulus, U. A., Wokaun, A., Scherer, G. G., Schmidt, T. J., Stamenkovic, V., Radmilovic, V., Markovic, N. M., & Ross, P. N. (2002) · The Journal of Physical Chemistry B · doi:10.1021/jp013442l · Cited by 954
Comparison of high surface Pt/C catalysts by cyclic voltammetry
Pozio, A., De Francesco, M., Cemmi, A., Cardellini, F., & Giorgi, L. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00921-1 · Cited by 906
Stamenković, V., Schmidt, T. J., Ross, P. N., & Marković, N. M. (2002) · The Journal of Physical Chemistry B · doi:10.1021/jp021182h · Cited by 829
Mukerjee, S., & Srinivasan, S. (1993) · Journal of Electroanalytical Chemistry · doi:10.1016/0022-0728(93)80380-z · Cited by 646
Formation of carbon-supported PtM alloys for low temperature fuel cells: a review
Antolini, E. (2003) · Materials Chemistry and Physics · doi:10.1016/s0254-0584(02)00389-9 · Cited by 624
Paulus, U. A., Wokaun, A., Scherer, G. G., Schmidt, T. J., Stamenkovic, V., Markovic, N. M., & Ross, P. N. (2002) · Electrochimica Acta · doi:10.1016/s0013-4686(02)00349-3 · Cited by 560
Cited by
Platinum-Based Nanostructured Materials: Synthesis, Properties, and Applications
Chen, A., & Holt-Hindle, P. (2010) · Chemical Reviews · doi:10.1021/cr9003902 · Cited by 1,390
Recent advances in activity and durability enhancement of Pt/C catalytic cathode in PEMFC
Yu, X., & Ye, S. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.07.048 · Cited by 1,098
Mayrhofer, K. J. J., Strmcnik, D., Blizanac, B. B., Stamenkovic, V., Arenz, M., & Markovic, N. M. (2008) · Electrochimica Acta · doi:10.1016/j.electacta.2007.11.057 · Cited by 980
Electrocatalysis for Polymer Electrolyte Fuel Cells: Recent Achievements and Future Challenges
Rabis, A., Rodriguez, P., & Schmidt, T. J. (2012) · ACS Catalysis · doi:10.1021/cs3000864 · Cited by 780
Active Sites of Au and Ag Nanoparticle Catalysts for CO2 Electroreduction to CO
Back, S., Yeom, M. S., & Jung, Y. (2015) · ACS Catalysis · doi:10.1021/acscatal.5b00462 · Cited by 545
Antolini, E., Salgado, J. R. C., & Gonzalez, E. R. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.03.006 · Cited by 503
Chen, J. G., Menning, C. A., & Zellner, M. B. (2008) · Surface Science Reports · doi:10.1016/j.surfrep.2008.02.001 · Cited by 498
Bezerra, C. W. B., Zhang, L., Liu, H., Lee, K., Marques, A. L. B., Marques, E. P., Wang, H., & Zhang, J. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.08.028 · Cited by 439
Palladium Monolayer and Palladium Alloy Electrocatalysts for Oxygen Reduction
Shao, M. H., Huang, T., Liu, P., Zhang, J., Sasaki, K., Vukmirovic, M. B., & Adzic, R. R. (2006) · Langmuir · doi:10.1021/la0610553 · Cited by 434
Solvothermal Synthesis of Platinum Alloy Nanoparticles for Oxygen Reduction Electrocatalysis
Carpenter, M. K., Moylan, T. E., Kukreja, R. S., Atwan, M. H., & Tessema, M. M. (2012) · Journal of the American Chemical Society · doi:10.1021/ja300756y · Cited by 429
Low and non-platinum electrocatalysts for PEMFCs: Current status, challenges and prospects
Brouzgou, A., Song, S. Q., & Tsiakaras, P. (2012) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2012.08.031 · Cited by 380
Pt-based nanoarchitecture and catalyst design for fuel cell applications
Jung, N., Chung, D. Y., Ryu, J., Yoo, S. J., & Sung, Y.-E. (2014) · Nano Today · doi:10.1016/j.nantod.2014.06.006 · Cited by 324
Lin, Y., Cui, X., Yen, C., & Wai, C. M. (2005) · The Journal of Physical Chemistry B · doi:10.1021/jp0514675 · Cited by 314
Long, N. V., Yang, Y., Minh Thi, C., Minh, N. V., Cao, Y., & Nogami, M. (2013) · Nano Energy · doi:10.1016/j.nanoen.2013.06.001 · Cited by 274
Antolini, E. (2017) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2017.05.081 · Cited by 210
Du, X. X., He, Y., Wang, X. X., & Wang, J. N. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01204c · Cited by 209
Nanostructured catalysts in fuel cells
Zhong, C.-J., Luo, J., Fang, B., Wanjala, B. N., Njoki, P. N., Loukrakpam, R., & Yin, J. (2010) · Nanotechnology · doi:10.1088/0957-4484/21/6/062001 · Cited by 198
Zhang, K., Yue, Q., Chen, G., Zhai, Y., Wang, L., Wang, H., Zhao, J., Liu, J., Jia, J., & Li, H. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp108305v · Cited by 147
Santiago, E. I., Varanda, L. C., & Villullas, H. M. (2007) · The Journal of Physical Chemistry C · doi:10.1021/jp0670081 · Cited by 125
Venkateswara Rao, C., & Viswanathan, B. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp9041606 · Cited by 96
Microwave-assisted optimization of platinum-nickel nanoalloys for catalytic water treatment
Ma, H., Wang, H., & Na, C. (2015) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2014.07.062 · Cited by 76
Influence of Oxide on the Oxygen Reduction Reaction of Carbon-Supported Pt−Ni Alloy Nanoparticles
Jeon, T.-Y., Yoo, S. J., Cho, Y.-H., Lee, K.-S., Kang, S. H., & Sung, Y.-E. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp9076273 · Cited by 74
Wang, K., Wang, Y., Geng, S., Wang, Y., & Song, S. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202113399 · Cited by 72
Mechanism for Oxygen Reduction Reaction on Pt3Ni Alloy Fuel Cell Cathode
Sha, Y., Yu, T. H., Merinov, B. V., Shirvanian, P., & Goddard, W. A. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp303966u · Cited by 65
Negro, E., Polizzi, S., Vezzù, K., Toniolo, L., Cavinato, G., & Di Noto, V. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2013.08.053 · Cited by 62
Okaya, K., Yano, H., Uchida, H., & Watanabe, M. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am9008693 · Cited by 56
Malheiro, A. R., Perez, J., & Villullas, H. M. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3006082 · Cited by 46
Okaya, K., Yano, H., Kakinuma, K., Watanabe, M., & Uchida, H. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am302224n · Cited by 36
Alkaline hydrogen electrode and oxygen reduction reaction on PtxNi nanoalloys
Campos-Roldán, C. A., Calvillo, L., Granozzi, G., & Alonso-Vante, N. (2020) · Journal of Electroanalytical Chemistry · doi:10.1016/j.jelechem.2019.113449 · Cited by 35
Self-citationLuo, J., Yin, J., Loukrakpam, R., Wanjala, B. N., Fang, B., Shan, S., Yang, L., Nie, M., Ng, M. S., Kinzler, J., et al. (2013) · Journal of Electroanalytical Chemistry · doi:10.1016/j.jelechem.2012.09.032 · Cited by 18
Methanol-Tolerant Oxygen Reduction Reaction at Pt–Pd/C Alloy Nanocatalysts
Remona, A. M., & Phani, K. L. N. (2011) · Journal of Fuel Cell Science and Technology · doi:10.1115/1.4001759 · Cited by 13
Metadata
- Authors
- Yang, H., Vogel, W., Lamy, C., & Alonso-Vante, N.
- Venue
- The Journal of Physical Chemistry B
- Publisher
- American Chemical Society (ACS)
- Published
- 2004-06-25
- Volume
- 108
- Issue
- 30
- Pages
- 11024-11034
- ISSN
- 1520-5207 (ISSN-L)
- 1520-6106
- OpenAlex
- W2086973557
- Cited by
- 323
- References
- 42
- FWCI
- 13.30
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.