The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Dielectrophoretic Assembly of Nanowires
Abstract
Nanowire (NW) assembly is currently of great interest, partly because NWs are considered as a fundamental component in the fabrication of a variety of devices. A powerful method has been developed to model the assembly of NWs. The three-dimensional dielectrophoretic (DEP) assembly of NWs across opposing electrodes is, for the first time, comprehensively studied using this new method. It is found that the DEP force reaches a maximum when the ratio of gap size to NW length is in the range 0.85-1.0. Both the magnitude and sign of the DEP torque on each NW varies with this ratio, and also with the orientation angle and the geometry and configuration of the electrode. The simulation of the dynamic assembly of individual and bundled NWs agrees with experiment. This method is of sufficient power that it will be of direct use in modeling DEP-based assembly and thus the manufacturing of nanoelectronic devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Peskin, C. S. (2002) · Acta Numerica · doi:10.1017/s0962492902000077 · Cited by 4,603
Jones, T. B. (1995) · doi:10.1017/cbo9780511574498 · Cited by 2,786
Cited by
High-yield self-limiting single-nanowire assembly with dielectrophoresis
Freer, E. M., Grachev, O., Duan, X., Martin, S., & Stumbo, D. P. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2010.106 · Cited by 434
Long, Y.-Z., Yu, M., Sun, B., Gu, C.-Z., & Fan, Z. (2012) · Chemical Society Reviews · doi:10.1039/c2cs15335a · Cited by 318
Self-assembly from milli- to nanoscales: methods and applications
Mastrangeli, M., Abbasi, S., Varel, C., Van Hoof, C., Celis, J.-P., & Böhringer, K. F. (2009) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/19/8/083001 · Cited by 256
Metadata
- Authors
- Liu, Y., Chung, J.-H., Liu, W. K., & Ruoff, R. S.
- Venue
- The Journal of Physical Chemistry B
- Publisher
- American Chemical Society (ACS)
- Published
- 2006-07-01
- Volume
- 110
- Issue
- 29
- Pages
- 14098-14106
- ISSN
- 1520-5207 (ISSN-L)
- 1520-6106
- OpenAlex
- W2004136660
- Cited by
- 183
- References
- 2
- FWCI
- 6.83
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.