The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
One-Step Fabrication of Copper Electrode by Laser-Induced Direct Local Reduction and Agglomeration of Copper Oxide Nanoparticle
Abstract
Copper oxide (CuO) nanoparticle-based organic solutions are highly stable in air as well as cheaper compared to copper (Cu) nanoparticle solutions due to the absence of particle oxidation problems. Laser direct patterning via photothermochemical reaction of the CuO nanoparticles is suggested to efficiently fabricate Cu electrodes. CuO nanoparticles dispersed in ethylene glycol were instantaneously reduced to Cu nanoparticles by intense laser irradiation, and the Cu nanoparticles were simultaneously agglomerated and sintered to form conductors without additional processes. Finally, Cu electrodes with about 10 μm thickness and a specific electrical resistance of 31 μΩ·cm were successfully fabricated on a glass and flexible substrate. Furthermore, the maximum possible patterning rate was discussed in terms of the reduction rate of CuO. This conductor structuring method enables an environmentally friendly and cost-effective process as well as a low-temperature manufacturing sequence to realize large-area, flexible electronics on polymer substrates.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Optical Constants of the Noble Metals
Johnson, P. B., & Christy, R. W. (1972) · Physical Review B · doi:10.1103/physrevb.6.4370 · Cited by 20,094
FIEVET, F., LAGIER, J., BLIN, B., BEAUDOIN, B., & FIGLARZ, M. (1989) · Solid State Ionics · doi:10.1016/0167-2738(89)90222-1 · Cited by 840
Cited by
Inkjet printing wearable electronic devices
Gao, M., Li, L., & Song, Y. (2017) · Journal of Materials Chemistry C · doi:10.1039/c7tc00038c · Cited by 535
Sensitive Wearable Temperature Sensor with Seamless Monolithic Integration
Shin, J., Jeong, B., Kim, J., Nam, V. B., Yoon, Y., Jung, J., Hong, S., Lee, H., Eom, H., Yeo, J., et al. (2020) · Advanced Materials · doi:10.1002/adma.201905527 · Cited by 449
Self-citationMaterials-Driven Soft Wearable Bioelectronics for Connected Healthcare
Gong, S., Lu, Y., Yin, J., Levin, A., & Cheng, W. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00502 · Cited by 411
Laser Irradiation of Metal Oxide Films and Nanostructures: Applications and Advances
Palneedi, H., Park, J. H., Maurya, D., Peddigari, M., Hwang, G., Annapureddy, V., Kim, J., Choi, J., Hahn, B., Priya, S., et al. (2018) · Advanced Materials · doi:10.1002/adma.201705148 · Cited by 300
Self-citation
Metadata
- Authors
- Kang, B., Han, S., Kim, J., Ko, S., & Yang, M.
- Venue
- The Journal of Physical Chemistry C
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-11-15
- Volume
- 115
- Issue
- 48
- Pages
- 23664-23670
- ISSN
- 1932-7447 (ISSN-L)
- 1932-7455
- OpenAlex
- W2316136284
- Cited by
- 204
- References
- 2
- FWCI
- 2.23
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.