The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Toward Effective Synergetic Effects from Graphene Nanoplatelets and Carbon Nanotubes on Thermal Conductivity of Ultrahigh Volume Fraction Nanocarbon Epoxy Composites
Abstract
Utilizing synergetic effects of different fillers is an important strategy to design and develop high-performance nanocomposites. However, owing to the well-known problems such as dispersion, solution viscosity control, and so on, synergetic enhancement effects are usually offset by the defects induced by fillers in highly loaded nanocomposites. In this work, remarkable synergetic efficiency was realized in graphene nanoplatelet (GNP) and multiwalled carbon nanotube (CNT) highly loaded epoxy composites through a well-designed fabrication method. Dramatic thermal conductivity enhancement was observed in the epoxy composites with 10–50 vol% nanocarbon filler due to synergetic effects. For example, the composite with 20 vol% CNTs and 20 vol% GNPs possess a thermal conductivity up to 6.31 W/mK. This is even much higher than that of the composites with individual 50 vol % CNTs or 50 vol% GNPs. A maximum thermal conductivity 7.30 W/mK was obtained, which is 38-fold of that of the pure epoxy resin. Thermal transport channels in the composites were thoroughly analyzed, and the mechanism of high synergetic effects achieved in thermal conductivity enhancement was discussed from the viewpoints of intrinsic properties, dispersion, contact, and matrix interaction of the fillers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thermal properties of graphene and nanostructured carbon materials
Balandin, A. A. (2011) · Nature Materials · doi:10.1038/nmat3064 · Cited by 6,244
Thermal Transport Measurements of Individual Multiwalled Nanotubes
Kim, P., Shi, L., Majumdar, A., & McEuen, P. L. (2001) · Physical Review Letters · doi:10.1103/physrevlett.87.215502 · Cited by 3,378
Graphene–Multilayer Graphene Nanocomposites as Highly Efficient Thermal Interface Materials
Shahil, K. M. F., & Balandin, A. A. (2012) · Nano Letters · doi:10.1021/nl203906r · Cited by 1,467
Single-walled nanotube bucky paper and nanocomposite
Gou, J. (2006) · Polymer International · doi:10.1002/pi.2079 · Cited by 90
Cited by
Thermal conductivity of polymers and polymer nanocomposites
Huang, C., Qian, X., & Yang, R. (2018) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2018.06.002 · Cited by 909
Two-Dimensional Materials for Thermal Management Applications
Song, H., Liu, J., Liu, B., Wu, J., Cheng, H.-M., & Kang, F. (2018) · Joule · doi:10.1016/j.joule.2018.01.006 · Cited by 680
Zhang, F., Feng, Y., & Feng, W. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100580 · Cited by 566
Bioinspired Modification of h-BN for High Thermal Conductive Composite Films with Aligned Structure
Shen, H., Guo, J., Wang, H., Zhao, N., & Xu, J. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am507416y · Cited by 491
Thermal conductivity of graphene-based polymer nanocomposites
Huang, X., Zhi, C., Lin, Y., Bao, H., Wu, G., Jiang, P., & Mai, Y.-W. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100577 · Cited by 410
Self-citationSynergy in hybrid polymer/nanocarbon composites. A review
Szeluga, U., Kumanek, B., & Trzebicka, B. (2015) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.02.021 · Cited by 373
Wen, Y., Chen, C., Ye, Y., Xue, Z., Liu, H., Zhou, X., Zhang, Y., Li, D., Xie, X., & Mai, Y. (2022) · Advanced Materials · doi:10.1002/adma.202201023 · Cited by 367
Mechanical, Thermal, and Electrical Properties of Graphene-Epoxy Nanocomposites—A Review
Atif, R., Shyha, I., & Inam, F. (2016) · Polymers · doi:10.3390/polym8080281 · Cited by 360
Kumar, A., Sharma, K., & Dixit, A. R. (2020) · Journal of Materials Science · doi:10.1007/s10853-019-04196-y · Cited by 338
Xie, B.-H., Huang, X., & Zhang, G.-J. (2013) · Composites Science and Technology · doi:10.1016/j.compscitech.2013.06.010 · Cited by 293
Self-citationHarito, C., Bavykin, D. V., Yuliarto, B., Dipojono, H. K., & Walsh, F. C. (2019) · Nanoscale · doi:10.1039/c9nr00117d · Cited by 287
Wu, Z., Xu, C., Ma, C., Liu, Z., Cheng, H., & Ren, W. (2019) · Advanced Materials · doi:10.1002/adma.201900199 · Cited by 279
Suh, D., Moon, C. M., Kim, D., & Baik, S. (2016) · Advanced Materials · doi:10.1002/adma.201600642 · Cited by 278
Epoxy/graphene nanocomposites – processing and properties: a review
Wei, J., Vo, T., & Inam, F. (2015) · RSC Advances · doi:10.1039/c5ra13897c · Cited by 267
Zhang, T., Wu, X., & Luo, T. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp5051639 · Cited by 213
Metadata
- Authors
- Huang, X., Zhi, C., & Jiang, P.
- Venue
- The Journal of Physical Chemistry C
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-10-29
- Volume
- 116
- Issue
- 44
- Pages
- 23812-23820
- ISSN
- 1932-7447 (ISSN-L)
- 1932-7455
- OpenAlex
- W2320091057
- Cited by
- 176
- References
- 4
- FWCI
- 4.92
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.