The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
First-Principles-Inspired Design Strategies for Graphene-Based Supercapacitor Electrodes
Open accessAbstract
Using density-functional theory calculations on a variety of model surfaces, we demonstrate that the low theoretical quantum capacitance of graphene-based electrodes can be significantly improved by altering local structural and morphological features. Common point defects, dopants, strain, and surface rippling are considered, as well as differences between locally single-layer and multilayer configurations. Local curvature is particularly effective at improving quantum capacitance, as is the inclusion of certain point defects and substitutional dopants at sufficiently high concentrations. We also show that single-layer graphene exhibits poor screening behavior of the double-layer potential when compared with multilayer samples, which suggests that higher area-specific capacitance can be obtained with samples a few layers thick. Overall, our results demonstrate the viability of local structural engineering as a tool to optimize graphene derivatives for use as supercapacitor electrodes, potentially increasing their theoretical charge storage capacity by severalfold.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Advanced carbon aerogels for energy applications
Biener, J., Stadermann, M., Suss, M., Worsley, M. A., Biener, M. M., Rose, K. A., & Baumann, T. F. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00627k · Cited by 651
Self-citation
Cited by
Laser-induced porous graphene films from commercial polymers
Lin, J., Peng, Z., Liu, Y., Ruiz-Zepeda, F., Ye, R., Samuel, E. L. G., Yacaman, M. J., Yakobson, B. I., & Tour, J. M. (2014) · Nature Communications · doi:10.1038/ncomms6714 · Cited by 2,946
Substantial Impact of Charge on Electrochemical Reactions of Two-Dimensional Materials
Kim, D., Shi, J., & Liu, Y. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b03002 · Cited by 263
Computational Insights into Materials and Interfaces for Capacitive Energy Storage
Zhan, C., Lian, C., Zhang, Y., Thompson, M. W., Xie, Y., Wu, J., Kent, P. R. C., Cummings, P. T., Jiang, D., & Wesolowski, D. J. (2017) · Advanced Science · doi:10.1002/advs.201700059 · Cited by 260
Metadata
- Authors
- Wood, B. C., Ogitsu, T., Otani, M., & Biener, J.
- Venue
- The Journal of Physical Chemistry C
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-12-23
- Volume
- 118
- Issue
- 1
- Pages
- 4-15
- ISSN
- 1932-7447 (ISSN-L)
- 1932-7455
- OpenAlex
- W2431668573
- Cited by
- 167
- References
- 1
- FWCI
- 4.47
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.