Conductivity and Wettability Changes of Ultrathin Nafion Films Subjected to Thermal Annealing and Liquid Water Exposure
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
The ionomer in the catalyst layer of polymer electrolyte fuel cells exists as ultrathin films (4–10 nm) covering the aggregates of Pt/C catalyst and may experience elevated temperatures during hot-pressing step of the electrode fabrication process. In this study, we report the effect of thermal annealing on pertinent ionomer-film properties: proton transport and surface wettability. Self-assembled, 10 nm thin Nafion ionomer films on silica substrate were heat treated at different temperatures in the range 40–160 °C. It was found that both surface and bulk rearrangement/reorganization occur simultaneously upon annealing. Surface reorganization was evident by the dramatic change in free-surface wettability from super-hydrophilic to hydrophobic. On the other hand, bulk rearrangement was evident from significant depression in the proton conductivity with increasing treatment temperature. Extended exposure, up to 18 h, to water in vapor form at high humidity did not change the protonic conductivity. On the other hand, exposure to liquid water resulted in an interesting finding of simultaneous regeneration of the film surface and bulk properties. The latter has implications for in operando behavior of ionomer in PEFC cathode catalyst layers, where local water and heat generation may strongly influence its properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Parallel cylindrical water nanochannels in Nafion fuel-cell membranes
Schmidt-Rohr, K., & Chen, Q. (2008) · Nature Materials · doi:10.1038/nmat2074 · Cited by 1,371
Fuel Cell Catalyst Layers: A Polymer Science Perspective
Holdcroft, S. (2014) · Chemistry of Materials · doi:10.1021/cm401445h · Cited by 481
Microstructure of Catalyst Layers in PEM Fuel Cells Redefined: A Computational Approach
Malek, K., Mashio, T., & Eikerling, M. (2011) · Electrocatalysis · doi:10.1007/s12678-011-0047-0 · Cited by 151
Cited by
New Insights into Perfluorinated Sulfonic-Acid Ionomers
Kusoglu, A., & Weber, A. Z. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00159 · Cited by 2,432
Unexplained transport resistances for low-loaded fuel-cell catalyst layers
Weber, A. Z., & Kusoglu, A. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta02952f · Cited by 333
Recent advances in multi-scale design and construction of materials for direct methanol fuel cells
Xia, Z., Zhang, X., Sun, H., Wang, S., & Sun, G. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.104048 · Cited by 289
Van Cleve, T., Khandavalli, S., Chowdhury, A., Medina, S., Pylypenko, S., Wang, M., More, K. L., Kariuki, N., Myers, D. J., Weber, A. Z., et al. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b17614 · Cited by 148
Kim, T.-H., Yi, J.-Y., Jung, C.-Y., Jeong, E., & Yi, S.-C. (2017) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.12.015 · Cited by 127
DeCaluwe, S. C., Baker, A. M., Bhargava, P., Fischer, J. E., & Dura, J. A. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.01.008 · Cited by 122
Kim, T.-H., Yoo, J. H., Maiyalagan, T., & Yi, S.-C. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2019.03.113 · Cited by 59
Analysis of Water Adsorption and Condensation in Catalyst Layers for Polymer Electrolyte Fuel Cells
Mashio, T., Sato, K., & Ohma, A. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2014.07.058 · Cited by 48
Metadata
- Authors
- Paul, D. K., & Karan, K.
- Venue
- The Journal of Physical Chemistry C
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-01-14
- Volume
- 118
- Issue
- 4
- Pages
- 1828-1835
- ISSN
- 1932-7447 (ISSN-L)
- 1932-7455
- OpenAlex
- W1977970230
- Cited by
- 116
- References
- 3
- FWCI
- 6.01
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.