The DOI matches its Crossref record; 69 of the 70 references it cites were found in a registry or an index.
Dictating Pt-Based Electrocatalyst Performance in Polymer Electrolyte Fuel Cells, from Formulation to Application
Abstract
In situ electrochemical diagnostics designed to probe ionomer interactions with platinum and carbon were applied to relate ionomer coverage and conformation, gleaned from anion adsorption data, with O 2 transport resistance for low-loaded (0.05 mg Pt cm –2 ) platinum-supported Vulcan carbon (Pt/Vu)-based electrodes in a polymer electrolyte fuel cell. Coupling the in situ diagnostic data with ex situ characterization of catalyst inks and electrode structures, the effect of ink composition is explained by both ink-level interactions that dictate the electrode microstructure during fabrication and the resulting local ionomer distribution near catalyst sites. Electrochemical techniques (CO displacement and ac impedance) show that catalyst inks with higher water content increase ionomer (sulfonate) interactions with Pt sites without significantly affecting ionomer coverage on the carbon support. Surprisingly, the higher anion adsorption is shown to have a minor impact on specific activity, while exhibiting a complex relationship with oxygen transport. Ex situ characterization of ionomer suspensions and catalyst/ionomer inks indicates that the lower ionomer coverage can be correlated with the formation of large ionomer aggregates and weaker ionomer/catalyst interactions in low-water content inks. These larger ionomer aggregates resulted in increased local oxygen transport resistance, namely, through the ionomer film, and reduced performance at high current density. In the water-rich inks, the ionomer aggregate size decreases, while stronger ionomer/Pt interactions are observed. The reduced ionomer aggregation improves transport resistance through the ionomer film, while the increased adsorption leads to the emergence of resistance at the ionomer/Pt interface. Overall, the high current density performance is shown to be a nonmonotonic function of ink water content, scaling with the local gas (H 2, O 2 ) transport resistance resulting from pore, thin film, and interfacial phenomena.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Therefore, Pt/Vulcan has a more uniform ionomer coverage than Pt/Ketjen due to higher Pt surface density [53,59,60].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [60]
In the citing paper
“Furthermore, the ionomer conformation will influence the interface between ionomer and catalyst, including the coverage of ionomer on carbon or Pt, the thickness of ionomer film, and the interaction between ionomer and Pt [22,60].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [60]
In the citing paper
“These would affect the local gas transport resistance through the ionomer layer or the interfacial resistance between the ionomer film and Pt [60].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [60]
Citations
Cites
Intermolecular and Surface Forces
(2011) · Elsevier eBooks · doi:10.1016/c2011-0-05119-0 · Cited by 8,968
Highly Crystalline Multimetallic Nanoframes with Three-Dimensional Electrocatalytic Surfaces
Chen, C., Kang, Y., Huo, Z., Zhu, Z., Huang, W., Xin, H. L., Snyder, J. D., Li, D., Herron, J. A., Mavrikakis, M., et al. (2014) · Science · doi:10.1126/science.1249061 · Cited by 2,765
Self-citationNew Insights into Perfluorinated Sulfonic-Acid Ionomers
Kusoglu, A., & Weber, A. Z. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00159 · Cited by 2,432
Self-citationZeta Potential in Colloid Science
(1981) · Elsevier eBooks · doi:10.1016/c2013-0-07389-6 · Cited by 2,328
Review and analysis of PEM fuel cell design and manufacturing
Mehta, V., & Cooper, J. S. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00542-6 · Cited by 1,685
Irena: tool suite for modeling and analysis of small-angle scattering
Ilavsky, J., & Jemian, P. R. (2009) · Journal of Applied Crystallography · doi:10.1107/s0021889809002222 · Cited by 1,612
Litster, S., & McLean, G. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.12.055 · Cited by 1,275
Kongkanand, A., & Mathias, M. F. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b00216 · Cited by 1,202
Mewis, J., & Wagner, N. J. (2011) · Cambridge University Press eBooks · doi:10.1017/cbo9780511977978 · Cited by 1,142
Nika : software for two-dimensional data reduction
Ilavsky, J. (2012) · Journal of Applied Crystallography · doi:10.1107/s0021889812004037 · Cited by 923
Research works printed but not linked: 9
- Borup R., 2017, FC-PAD: Fuel Cell Performance and Durability Consortium
- Kocha S., 2014, Best Practices and Benchmark Activities for ORR Measurements by the Rotating Disk Electrode Technique FC111
- Ulsh M., 2019, Material-Process-Performance Relationships in PEM Catalyst Inks and Coated Layers
- Debe M. K., 2010, Advanced Cathode Catalysts and Supports for PEM Fuel Cells
- 10.1149/2.0301813jes · DOI
- 10.1016/j.electacta.2016.04.023 · DOI · Paper page
- 10.1149/2.0031907jes · DOI
- Derjaguin B., 1941, Acta Physicochem. URSS, 14, 633
- 10.1149/2.0401414jes · DOI
Cited by
New roads and challenges for fuel cells in heavy-duty transportation
Cullen, D. A., Neyerlin, K. C., Ahluwalia, R. K., Mukundan, R., More, K. L., Borup, R. L., Weber, A. Z., Myers, D. J., & Kusoglu, A. (2021) · Nature Energy · doi:10.1038/s41560-021-00775-z · Cited by 1,277
Self-citationDurability challenges of anion exchange membrane fuel cells
Mustain, W. E., Chatenet, M., Page, M., & Kim, Y. S. (2020) · Energy & Environmental Science · doi:10.1039/d0ee01133a · Cited by 677
Chen, Y., Vise, A., Klein, W. E., Cetinbas, F. C., Myers, D. J., Smith, W. A., Deutsch, T. G., & Neyerlin, K. C. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c00860 · Cited by 179
Self-citationNguyen, H., Klose, C., Metzler, L., Vierrath, S., & Breitwieser, M. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202103559 · Cited by 133
Volk, E. K., Kreider, M. E., Kwon, S., & Alia, S. M. (2023) · EES Catalysis · doi:10.1039/d3ey00193h · Cited by 129
Metadata
- Authors
- Van Cleve, T., Khandavalli, S., Chowdhury, A., Medina, S., Pylypenko, S., Wang, M., More, K. L., Kariuki, N., Myers, D. J., Weber, A. Z., Mauger, S. A., Ulsh, M., & Neyerlin, K. C.
- Affiliations
- Chemistry and Nanoscience Center, National Renewable Energy Laboratory, Golden, Colorado 80401, United States
- National Laboratory of the Rockies (US)
- Lawrence Berkeley National Laboratory (US)
- Colorado School of Mines (US)
- Oak Ridge National Laboratory (US)
- Argonne National Laboratory (US)
- Corresponding author
- Neyerlin, K. C.
- ORCID
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-11-19
- Volume
- 11
- Issue
- 50
- Pages
- 46953-46964
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2990772530
- Cited by
- 148
- References
- 70
- Citations by year
- 2026: 20 · 2025: 28 · 2024: 26 · 2023: 16 · 2022: 21 · 2021: 18 · 2020: 19
- FWCI
- 5.21
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- ACS Applied Materials & Interfaces (publishedVersion)
- PubMed (publishedVersion)
- eScholarship (California Digital Library) (submittedVersion)
- OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) (submittedVersion)
- Funders
- Fuel Cell Technologies Office (DE-AC02-05CH11231)
- Office of Science (DE-AC36-08GO28308, DE-AC02-06CH11357)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Materials Science › Materials Chemistry › Advancements in Solid Oxide Fuel Cells
- Keywords
- platinum electrocatalysts, proton exchange membrane fuel cells, catalyst ink, anion adsorption, oxygen transport resistance, Vulcan carbon support, low platinum loading, electrode microstructure
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Dictating Pt-Based Electrocatalyst Performance in Polymer Electrolyte Fuel Cells, from Formulation to Application. https://app.cochat.ai/papers/10.1021/acsami.9b17614
- The paper
- Van Cleve, T., Khandavalli, S., Chowdhury, A., Medina, S., Pylypenko, S., Wang, M., More, K. L., Kariuki, N., Myers, D. J., Weber, A. Z., Mauger, S. A., Ulsh, M., & Neyerlin, K. C. (2019). Dictating Pt-Based Electrocatalyst Performance in Polymer Electrolyte Fuel Cells, from Formulation to Application. ACS Applied Materials & Interfaces. https://doi.org/10.1021/acsami.9b17614
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.