The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Reduced Graphene Oxide Paper Electrode: Opposing Effect of Thermal Annealing on Li and Na Cyclability
Abstract
We study long-term electrochemical sodium and lithium cycling, and tensile testing behavior of thermally reduced graphene oxide (rGO) paper electrodes. We find strong dependence of annealing temperature and gas environment on the electrical conductivity, electrochemical capacity, and rate capability of the electrodes. The effect, however, was opposing for the two cell types. Lithium charge capacity increased with increasing annealing temperatures reaching a stable value of ∼325 mAh·g anode –1 (∼100 mAh·cm –3 anode at ∼48 μA·cm –2 with respect to total volume of the electrode) for specimen annealed at 900 °C, while a sharp decline in Na charge capacity was noted for rGO annealed above 500 °C. Maximum sodium charge capacity of ∼140 mAh·g –1 anode at 100 mA·g –1 anode (∼98 mAh·cm anode –3 at ∼70 μA·cm –2 ) was realized for specimen reduced at 500 °C. These values are the highest reported for GO paper electrodes. More important, annealing of GO in NH 3 environment resulted in a complete shutdown of its Na-ion cyclability showing near-zero charge capacity. On the contrary, NH 3 annealing only improved the electrode’s Li-ion cycling efficiency and rate capability. This behavior is attributed to the increased level of ordering in graphene sheets and decreased interlayer spacing with increasing annealing temperatures in Ar or reduction at moderate temperatures in NH 3 atmosphere. Further, uniaxial tensile tests and videography highlighted the superior elasticity and high strain to failure of crumpled paper electrodes. The present work provides new insights toward the optimization and design of Li and other larger metal-ion battery electrodes where graphene is utilized as an active material, conductive agent, or a flexible mechanical support.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Where do batteries end and supercapacitors begin?
Simon, P., Gogotsi, Y., & Dunn, B. (2014) · Science · doi:10.1126/science.1249625 · Cited by 5,634
Cited by
Na-Ion Battery Anodes: Materials and Electrochemistry
Luo, W., Shen, F., Bommier, C., Zhu, H., Ji, X., & Hu, L. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00482 · Cited by 1,081
Xie, X., Ao, Z., Su, D., Zhang, J., & Wang, G. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201404078 · Cited by 743
High-Performance Anode Materials for Rechargeable Lithium-Ion Batteries
Lu, J., Chen, Z., Pan, F., Cui, Y., & Amine, K. (2018) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0001-4 · Cited by 695
Saurel, D., Orayech, B., Xiao, B., Carriazo, D., Li, X., & Rojo, T. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703268 · Cited by 668
Zhao, Y., Wang, L. P., Sougrati, M. T., Feng, Z., Leconte, Y., Fisher, A., Srinivasan, M., & Xu, Z. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601424 · Cited by 586
Metadata
- Authors
- David, L., & Singh, G.
- Venue
- The Journal of Physical Chemistry C
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-12-01
- Volume
- 118
- Issue
- 49
- Pages
- 28401-28408
- ISSN
- 1932-7447 (ISSN-L)
- 1932-7455
- OpenAlex
- W2314316880
- Cited by
- 178
- References
- 1
- FWCI
- 14.33
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Reduced Graphene Oxide Paper Electrode: Opposing Effect of Thermal Annealing on Li and Na Cyclability. https://app.cochat.ai/papers/10.1021/jp5080847
- The paper
- David, L., & Singh, G. (2014). Reduced Graphene Oxide Paper Electrode: Opposing Effect of Thermal Annealing on Li and Na Cyclability. The Journal of Physical Chemistry C. https://doi.org/10.1021/jp5080847
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.