The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Synthesis of Ag/TiO2 Nanotube Heterojunction with Improved Visible-Light Photocatalytic Performance Inspired by Bioadhesion
Abstract
Inspired by the bioadhesion mechanism found in mussel, a catechol derivative, 3-(3,4-dihydroxyphenyl)propionic acid (diHPP), is employed as both linker and reducer of Ag + to synthesize the Ag/TiO 2 nanotube (Ag/TNT) heterojunction under ambient conditions in this study. In the prepared Ag/TNT composite, Ag nanocrystals about 3.8 nm in diameter distribute over the TNT surface uniformly and form the heterojunction structure with TNT. The diHPP first links to the TNT surface through the bidentate chelation of catechol group with Ti 4+ and then acts as both an anchor and a reducer to in situ nucleate and grow Ag nanocrystals on the TNT surface. By adjusting the AgNO 3 concentration, the loading amount of Ag nanocrystals on the TNT surface can be controlled easily, and the visible-light absorption ability of Ag/TNT heterojunctions enhances with increasing the Ag loading amount. Moreover, their photocatalytic activity was evaluated by the degradation capability of Rhodamine B (RhB) under visible light. The Ag/TNT heterojunctions exhibit the high visible-light photocatalytic activity, which can almost degrade 100% RhB within 2 h. This excellent performance can be attributed to the local electric field caused by the surface plasmon resonance (SPR) of Ag nanocrystals and the high adsorption capability of TNTs with large specific surface area.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mussel-inspired surface chemistry for multifunctional coatings
Lee, H., Dellatore, S. M., Miller, W. M., & Messersmith, P. B. (2007) · Science · doi:10.1126/science.1147241 · Cited by 10,965
Liu, Y., Ai, K., & Lu, L. (2014) · Chemical Reviews · doi:10.1021/cr400407a · Cited by 4,794
TiO2 photocatalysis: Design and applications
Nakata, K., & Fujishima, A. (2012) · Journal of Photochemistry and Photobiology C: Photochemistry Reviews · doi:10.1016/j.jphotochemrev.2012.06.001 · Cited by 3,651
Cited by
A review of one-dimensional TiO2nanostructured materials for environmental and energy applications
Ge, M., Cao, C., Huang, J., Li, S., Chen, Z., Zhang, K.-Q., Al-Deyab, S. S., & Lai, Y. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta09323f · Cited by 930
Hao, R., Wang, G., Tang, H., Sun, L., Xu, C., & Han, D. (2016) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2016.01.026 · Cited by 668
Energy transfer in plasmonic photocatalytic composites
Ma, X.-C., Dai, Y., Yu, L., & Huang, B.-B. (2016) · Light: Science & Applications · doi:10.1038/lsa.2016.17 · Cited by 553
Kumar, A., Choudhary, P., Kumar, A., Camargo, P. H. C., & Krishnan, V. (2022) · Small · doi:10.1002/smll.202101638 · Cited by 441
Mussel-Inspired Surface Engineering for Water-Remediation Materials
Wang, Z., Yang, H.-C., He, F., Peng, S., Li, Y., Shao, L., & Darling, S. B. (2019) · Matter · doi:10.1016/j.matt.2019.05.002 · Cited by 375
Self-citation
Metadata
- Authors
- Yang, D., Sun, Y., Tong, Z., Tian, Y., Li, Y., & Jiang, Z.
- Venue
- The Journal of Physical Chemistry C
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-03-06
- Volume
- 119
- Issue
- 11
- Pages
- 5827-5835
- ISSN
- 1932-7447 (ISSN-L)
- 1932-7455
- OpenAlex
- W2331107820
- Cited by
- 158
- References
- 3
- FWCI
- 7.14
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.